Merge tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master

Pull ARM SoC fixes from Arnd Bergmann:
 "This time there are a number of actual code fixes, plus a small set of
  device tree issues getting addressed:

  Renesas:

    - one defconfig cleanup to allow a later Kconfig change

  Intel socfpga:

    - enable QSPI devices on some machines

    - fix DTC validation warnings

  TI OMAP:

    - Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target
      module driver

    - A regression fix for ti-sysc no-idle handling that caused issues
      compared to earlier platform data based booting

    - A fix for memory leak for omap_hwmod_allocate_module

    - Fix d_can driver probe for am437x

  NXP i.MX:

    - A couple of fixes on i.MX platform device registration code to
      stop the use of invalid IRQ 0.

    - Fix a regression seen on ls1021a platform, caused by commit
      52102a3b ("soc: imx: move cpu code to drivers/soc/imx").

    - Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.

  Amlogic Meson:

    - misc DT fixes

    - SoC ID fixes to detect all chips correctly"

* tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
  ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
  arm64: dts: stratix10: increase QSPI reg address in nand dts file
  arm64: dts: stratix10: add status to qspi dts node
  arm64: dts: agilex: add status to qspi dts node
  ARM: dts: Fix dcan driver probe failed on am437x platform
  ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
  arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
  soc: imx: check ls1021a
  ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
  ARM: imx: Provide correct number of resources when registering gpio devices
  ARM: dts: imx6qdl-gw551x: fix audio SSI
  bus: ti-sysc: Do not disable on suspend for no-idle
  bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
  bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
  ARM: dts: meson: Align L2 cache-controller nodename with dtschema
  arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
  arm64: dts: meson: add missing gxl rng clock
  soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1540,8 +1540,9 @@ target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xcc000 0x2000>;
@@ -1549,6 +1550,8 @@ target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
 			dcan0: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 0>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1560,8 +1563,9 @@ target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xd0000 0x2000>;
@@ -1569,6 +1573,8 @@ target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
 			dcan1: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-name = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";

arch/arm/boot/dts/imx6qdl-gw551x.dtsi

@@ -110,7 +110,7 @@ sound-digital {
 		simple-audio-card,frame-master = <&sound_codec>;
 
 		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
+			sound-dai = <&ssi1>;
 		};
 
 		sound_codec: simple-audio-card,codec {

arch/arm/boot/dts/meson.dtsi

@@ -11,7 +11,7 @@ / {
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	L2: l2-cache-controller@c4200000 {
+	L2: cache-controller@c4200000 {
 		compatible = "arm,pl310-cache";
 		reg = <0xc4200000 0x1000>;
 		cache-unified;

arch/arm/boot/dts/socfpga.dtsi

@@ -726,7 +726,7 @@ ocram-ecc@ffd08144 {
 			};
 		};
 
-		L2: l2-cache@fffef000 {
+		L2: cache-controller@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
 			interrupts = <0 38 0x04>;

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -636,7 +636,7 @@ sdr: sdr@ffcfb100 {
 			reg = <0xffcfb100 0x80>;
 		};
 
-		L2: l2-cache@fffff000 {
+		L2: cache-controller@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/mach-imx/devices/devices-common.h

@@ -289,6 +289,6 @@ struct platform_device *__init imx_add_spi_imx(
 		const struct spi_imx_master *pdata);
 
 struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
-					int irq, int irq_err);
+					int irq);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);

arch/arm/mach-imx/devices/platform-gpio-mxc.c

@@ -24,7 +24,8 @@ struct platform_device *__init mxc_register_gpio(char *name, int id,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
+	unsigned int nres;
 
-	return platform_device_register_resndata(&mxc_aips_bus,
-			name, id, res, ARRAY_SIZE(res), NULL, 0);
+	nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
+	return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
 }

arch/arm/mach-imx/devices/platform-imx-dma.c

@@ -6,7 +6,7 @@
 #include "devices-common.h"
 
 struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
-	resource_size_t iobase, int irq, int irq_err)
+	resource_size_t iobase, int irq)
 {
 	struct resource res[] = {
 		{
@@ -17,10 +17,6 @@ struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
 			.start = irq,
 			.end = irq,
 			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = irq_err,
-			.end = irq_err,
-			.flags = IORESOURCE_IRQ,
 		},
 	};
 

arch/arm/mach-imx/mm-imx21.c

@@ -78,8 +78,7 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
 	pinctrl_provide_dummies();
-	imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR,
-			MX21_INT_DMACH0, 0); /* No ERR irq */
+	imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0);
 	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
 					ARRAY_SIZE(imx21_audmux_res));
 }

arch/arm/mach-imx/mm-imx27.c

@@ -79,8 +79,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
 	pinctrl_provide_dummies();
-	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR,
-			MX27_INT_DMACH0, 0); /* No ERR irq */
+	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
 					ARRAY_SIZE(imx27_audmux_res));

arch/arm/mach-omap2/omap_hwmod.c

@@ -3435,7 +3435,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 		regs = ioremap(data->module_pa,
 			       data->module_size);
 		if (!regs)
-			return -ENOMEM;
+			goto out_free_sysc;
 	}
 
 	/*
@@ -3445,13 +3445,13 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	if (oh->class->name && strcmp(oh->class->name, data->name)) {
 		class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL);
 		if (!class)
-			return -ENOMEM;
+			goto out_unmap;
 	}
 
 	if (list_empty(&oh->slave_ports)) {
 		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
 		if (!oi)
-			return -ENOMEM;
+			goto out_free_class;
 
 		/*
 		 * Note that we assume interconnect interface clocks will be
@@ -3478,6 +3478,14 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
+
+out_free_class:
+	kfree(class);
+out_unmap:
+	iounmap(regs);
+out_free_sysc:
+	kfree(sysc);
+	return -ENOMEM;
 }
 
 static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -77,7 +77,7 @@ psci {
 		method = "smc";
 	};
 
-	intc: intc@fffc1000 {
+	intc: interrupt-controller@fffc1000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -302,7 +302,7 @@ mmc: dwmmc0@ff808000 {
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -445,7 +445,7 @@ timer3: timer3@ffd00100 {
 			clock-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 108 4>;
@@ -456,7 +456,7 @@ uart0: serial0@ffc02000 {
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 109 4>;

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts

@@ -155,6 +155,7 @@ rtc@68 {
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts

@@ -188,6 +188,7 @@ rtc@68 {
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -211,12 +212,12 @@ partitions {
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@4000000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts

@@ -10,7 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/meson-aiu.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts

@@ -9,7 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";

arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&mali {
+	assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+			  <&clkc CLKID_MALI_0>,
+			  <&clkc CLKID_MALI>; /* Glitch free mux */
+	assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+				 <0>, /* Do Nothing */
+				 <&clkc CLKID_MALI_0>;
+	assigned-clock-rates = <0>, /* Do Nothing */
+			       <666666666>,
+			       <0>; /* Do Nothing */
+};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -337,6 +337,11 @@ clkc: clock-controller {
 	};
 };
 
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };

arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts

@@ -98,6 +98,7 @@ &watchdog0 {
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm64/configs/defconfig

@@ -194,7 +194,7 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCI_TEGRA=y
-CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
 CONFIG_PCIE_ALTERA=y

drivers/bus/ti-sysc.c

@@ -236,15 +236,14 @@ static int sysc_wait_softreset(struct sysc *ddata)
 		syss_done = ddata->cfg.syss_mask;
 
 	if (syss_offset >= 0) {
-		error = readx_poll_timeout(sysc_read_sysstatus, ddata, rstval,
-					   (rstval & ddata->cfg.syss_mask) ==
-					   syss_done,
-					   100, MAX_MODULE_SOFTRESET_WAIT);
+		error = readx_poll_timeout_atomic(sysc_read_sysstatus, ddata,
+				rstval, (rstval & ddata->cfg.syss_mask) ==
+				syss_done, 100, MAX_MODULE_SOFTRESET_WAIT);
 
 	} else if (ddata->cfg.quirks & SYSC_QUIRK_RESET_STATUS) {
-		error = readx_poll_timeout(sysc_read_sysconfig, ddata, rstval,
-					   !(rstval & sysc_mask),
-					   100, MAX_MODULE_SOFTRESET_WAIT);
+		error = readx_poll_timeout_atomic(sysc_read_sysconfig, ddata,
+				rstval, !(rstval & sysc_mask),
+				100, MAX_MODULE_SOFTRESET_WAIT);
 	}
 
 	return error;
@@ -1279,7 +1278,8 @@ static int __maybe_unused sysc_noirq_suspend(struct device *dev)
 
 	ddata = dev_get_drvdata(dev);
 
-	if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE)
+	if (ddata->cfg.quirks &
+	    (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
 		return 0;
 
 	return pm_runtime_force_suspend(dev);
@@ -1291,7 +1291,8 @@ static int __maybe_unused sysc_noirq_resume(struct device *dev)
 
 	ddata = dev_get_drvdata(dev);
 
-	if (ddata->cfg.quirks & SYSC_QUIRK_LEGACY_IDLE)
+	if (ddata->cfg.quirks &
+	    (SYSC_QUIRK_LEGACY_IDLE | SYSC_QUIRK_NO_IDLE))
 		return 0;
 
 	return pm_runtime_force_resume(dev);
@@ -1728,8 +1729,8 @@ static void sysc_quirk_rtc(struct sysc *ddata, bool lock)
 
 	local_irq_save(flags);
 	/* RTC_STATUS BUSY bit may stay active for 1/32768 seconds (~30 usec) */
-	error = readl_poll_timeout(ddata->module_va + 0x44, val,
-				   !(val & BIT(0)), 100, 50);
+	error = readl_poll_timeout_atomic(ddata->module_va + 0x44, val,
+					  !(val & BIT(0)), 100, 50);
 	if (error)
 		dev_warn(ddata->dev, "rtc busy timeout\n");
 	/* Now we have ~15 microseconds to read/write various registers */

drivers/soc/amlogic/meson-gx-socinfo.c

@@ -66,10 +66,12 @@ static const struct meson_gx_package_id {
 	{ "A113D", 0x25, 0x22, 0xff },
 	{ "S905D2", 0x28, 0x10, 0xf0 },
 	{ "S905X2", 0x28, 0x40, 0xf0 },
-	{ "S922X", 0x29, 0x40, 0xf0 },
 	{ "A311D", 0x29, 0x10, 0xf0 },
-	{ "S905X3", 0x2b, 0x5, 0xf },
-	{ "S905D3", 0x2b, 0xb0, 0xf0 },
+	{ "S922X", 0x29, 0x40, 0xf0 },
+	{ "S905D3", 0x2b, 0x4, 0xf5 },
+	{ "S905X3", 0x2b, 0x5, 0xf5 },
+	{ "S905X3", 0x2b, 0x10, 0x3f },
+	{ "S905D3", 0x2b, 0x30, 0x3f },
 	{ "A113L", 0x2c, 0x0, 0xf8 },
 };
 

drivers/soc/imx/soc-imx.c

@@ -33,6 +33,9 @@ static int __init imx_soc_device_init(void)
 	u32 val;
 	int ret;
 
+	if (of_machine_is_compatible("fsl,ls1021a"))
+		return 0;
+
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
 	if (!soc_dev_attr)
 		return -ENOMEM;