kconfig: use bool instead of boolean for type definition attributes

Support for keyword 'boolean' will be dropped later on.

No functional change.

Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.comSigned-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

arch/mips/pmcs-msp71xx/Kconfig

@@ -36,14 +36,14 @@ config PMC_MSP7120_FPGA
 endchoice
 
 config MSP_HAS_USB
-	boolean
+	bool
 	depends on PMC_MSP
 
 config MSP_ETH
-	boolean
+	bool
 	select MSP_HAS_MAC
 	depends on PMC_MSP
 
 config MSP_HAS_MAC
-	boolean
+	bool
 	depends on PMC_MSP

drivers/connector/Kconfig

@@ -12,7 +12,7 @@ menuconfig CONNECTOR
 if CONNECTOR
 
 config PROC_EVENTS
-	boolean "Report process events to userspace"
+	bool "Report process events to userspace"
 	depends on CONNECTOR=y
 	default y
 	---help---

drivers/hwmon/Kconfig

@@ -1595,7 +1595,7 @@ config SENSORS_W83795
 	  will be called w83795.
 
 config SENSORS_W83795_FANCTRL
-	boolean "Include automatic fan control support (DANGEROUS)"
+	bool "Include automatic fan control support (DANGEROUS)"
 	depends on SENSORS_W83795
 	default n
 	help

drivers/hwmon/pmbus/Kconfig

@@ -57,7 +57,7 @@ config SENSORS_LTC2978
 	  be called ltc2978.
 
 config SENSORS_LTC2978_REGULATOR
-	boolean "Regulator support for LTC2978 and compatibles"
+	bool "Regulator support for LTC2978 and compatibles"
 	depends on SENSORS_LTC2978 && REGULATOR
 	help
 	  If you say yes here you get regulator support for Linear

drivers/i2c/Kconfig

@@ -35,11 +35,11 @@ config ACPI_I2C_OPREGION
 if I2C
 
 config I2C_BOARDINFO
-	boolean
+	bool
 	default y
 
 config I2C_COMPAT
-	boolean "Enable compatibility bits for old user-space"
+	bool "Enable compatibility bits for old user-space"
 	default y
 	help
 	  Say Y here if you intend to run lm-sensors 3.1.1 or older, or any

drivers/iio/Kconfig

@@ -21,7 +21,7 @@ config IIO_BUFFER
 if IIO_BUFFER
 
 config IIO_BUFFER_CB
-boolean "IIO callback buffer used for push in-kernel interfaces"
+	bool "IIO callback buffer used for push in-kernel interfaces"
 	help
 	  Should be selected by any drivers that do in-kernel push
 	  usage.  That is, those where the data is pushed to the consumer.
@@ -44,7 +44,7 @@ config IIO_TRIGGERED_BUFFER
 endif # IIO_BUFFER
 
 config IIO_TRIGGER
-	boolean "Enable triggered sampling support"
+	bool "Enable triggered sampling support"
 	help
 	  Provides IIO core support for triggers.  Currently these
 	  are used to initialize capture of samples to push into

drivers/isdn/hardware/mISDN/Kconfig

@@ -24,7 +24,7 @@ config MISDN_HFCMULTI
 	   * HFC-E1 (E1 interface for 2Mbit ISDN)
 
 config MISDN_HFCMULTI_8xx
-	boolean "Support for XHFC embedded board in HFC multiport driver"
+	bool "Support for XHFC embedded board in HFC multiport driver"
 	depends on MISDN
 	depends on MISDN_HFCMULTI
 	depends on 8xx

drivers/md/Kconfig

@@ -177,7 +177,7 @@ config MD_FAULTY
 source "drivers/md/bcache/Kconfig"
 
 config BLK_DEV_DM_BUILTIN
-	boolean
+	bool
 
 config BLK_DEV_DM
 	tristate "Device mapper support"
@@ -196,7 +196,7 @@ config BLK_DEV_DM
 	  If unsure, say N.
 
 config DM_DEBUG
-	boolean "Device mapper debugging support"
+	bool "Device mapper debugging support"
 	depends on BLK_DEV_DM
 	---help---
 	  Enable this for messages that may help debug device-mapper problems.

drivers/md/persistent-data/Kconfig

@@ -8,7 +8,7 @@ config DM_PERSISTENT_DATA
 	 device-mapper targets such as the thin provisioning target.
 
 config DM_DEBUG_BLOCK_STACK_TRACING
-       boolean "Keep stack trace of persistent data block lock holders"
+       bool "Keep stack trace of persistent data block lock holders"
        depends on STACKTRACE_SUPPORT && DM_PERSISTENT_DATA
        select STACKTRACE
        ---help---

drivers/net/ethernet/ti/Kconfig

@@ -50,7 +50,7 @@ config TI_DAVINCI_CPDMA
 	  will be called davinci_cpdma.  This is recommended.
 
 config TI_CPSW_PHY_SEL
-	boolean "TI CPSW Switch Phy sel Support"
+	bool "TI CPSW Switch Phy sel Support"
 	depends on TI_CPSW
 	---help---
 	  This driver supports configuring of the phy mode connected to
@@ -71,7 +71,7 @@ config TI_CPSW
 	  will be called cpsw.
 
 config TI_CPTS
-	boolean "TI Common Platform Time Sync (CPTS) Support"
+	bool "TI Common Platform Time Sync (CPTS) Support"
 	depends on TI_CPSW
 	select PTP_1588_CLOCK
 	---help---

drivers/net/usb/Kconfig

@@ -397,14 +397,14 @@ config USB_NET_CDC_SUBSET
 	  not generally have permanently assigned Ethernet addresses.
 
 config USB_ALI_M5632
-	boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
+	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
 	  based on this design, which supports USB 2.0 high speed.
 
 config USB_AN2720
-	boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
@@ -412,7 +412,7 @@ config USB_AN2720
 	  Cypress brand.
 
 config USB_BELKIN
-	boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
+	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
 	depends on USB_NET_CDC_SUBSET
 	default y
 	help
@@ -421,7 +421,7 @@ config USB_BELKIN
 	  microcontroller, with LEDs that indicate traffic.
 
 config USB_ARMLINUX
-	boolean "Embedded ARM Linux links (iPaq, ...)"
+	bool "Embedded ARM Linux links (iPaq, ...)"
 	depends on USB_NET_CDC_SUBSET
 	default y
 	help
@@ -438,14 +438,14 @@ config USB_ARMLINUX
 	  this simpler protocol by installing a different kernel.
 
 config USB_EPSON2888
-	boolean "Epson 2888 based firmware (DEVELOPMENT)"
+	bool "Epson 2888 based firmware (DEVELOPMENT)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option to support the usb networking links used
 	  by some sample firmware from Epson.
 
 config USB_KC2190
-	boolean "KT Technology KC2190 based cables (InstaNet)"
+	bool "KT Technology KC2190 based cables (InstaNet)"
 	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable

drivers/net/wireless/rt2x00/Kconfig

@@ -243,14 +243,14 @@ config RT2X00_LIB
 	select AVERAGE
 
 config RT2X00_LIB_FIRMWARE
-	boolean
+	bool
 	select FW_LOADER
 
 config RT2X00_LIB_CRYPTO
-	boolean
+	bool
 
 config RT2X00_LIB_LEDS
-	boolean
+	bool
 	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
 
 config RT2X00_LIB_DEBUGFS

drivers/pci/pcie/aer/Kconfig

@@ -3,7 +3,7 @@
 #
 
 config PCIEAER
-	boolean "Root Port Advanced Error Reporting support"
+	bool "Root Port Advanced Error Reporting support"
 	depends on PCIEPORTBUS
 	select RAS
 	default y

drivers/rtc/Kconfig

@@ -65,7 +65,7 @@ config RTC_DEBUG
 comment "RTC interfaces"
 
 config RTC_INTF_SYSFS
-	boolean "/sys/class/rtc/rtcN (sysfs)"
+	bool "/sys/class/rtc/rtcN (sysfs)"
 	depends on SYSFS
 	default RTC_CLASS
 	help
@@ -75,7 +75,7 @@ config RTC_INTF_SYSFS
 	  If unsure, say Y.
 
 config RTC_INTF_PROC
-	boolean "/proc/driver/rtc (procfs for rtcN)"
+	bool "/proc/driver/rtc (procfs for rtcN)"
 	depends on PROC_FS
 	default RTC_CLASS
 	help
@@ -88,7 +88,7 @@ config RTC_INTF_PROC
 	  If unsure, say Y.
 
 config RTC_INTF_DEV
-	boolean "/dev/rtcN (character devices)"
+	bool "/dev/rtcN (character devices)"
 	default RTC_CLASS
 	help
 	  Say yes here if you want to use your RTCs using the /dev
@@ -455,7 +455,7 @@ config RTC_DRV_DM355EVM
 	  Supports the RTC firmware in the MSP430 on the DM355 EVM.
 
 config RTC_DRV_TWL92330
-	boolean "TI TWL92330/Menelaus"
+	bool "TI TWL92330/Menelaus"
 	depends on MENELAUS
 	help
 	  If you say yes here you get support for the RTC on the

drivers/spi/Kconfig

@@ -29,7 +29,7 @@ menuconfig SPI
 if SPI
 
 config SPI_DEBUG
-	boolean "Debug support for SPI drivers"
+	bool "Debug support for SPI drivers"
 	depends on DEBUG_KERNEL
 	help
 	  Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
@@ -40,8 +40,8 @@ config SPI_DEBUG
 #
 
 config SPI_MASTER
-#	boolean "SPI Master Support"
-	boolean
+#	bool "SPI Master Support"
+	bool
 	default SPI
 	help
 	  If your system has an master-capable SPI controller (which

drivers/staging/board/Kconfig

 config STAGING_BOARD
-	boolean "Staging Board Support"
+	bool "Staging Board Support"
 	depends on OF_ADDRESS
 	depends on BROKEN
 	help

drivers/staging/emxx_udc/Kconfig

 config USB_EMXX
-	boolean "EMXX USB Function Device Controller"
+	bool "EMXX USB Function Device Controller"
  	depends on USB_GADGET && (ARCH_SHMOBILE || (ARM && COMPILE_TEST))
 	help
 	   The Emma Mobile series of SoCs from Renesas Electronics and

drivers/staging/iio/Kconfig

@@ -30,13 +30,13 @@ config IIO_SIMPLE_DUMMY
 if IIO_SIMPLE_DUMMY
 
 config IIO_SIMPLE_DUMMY_EVENTS
-       boolean "Event generation support"
+       bool "Event generation support"
        select IIO_DUMMY_EVGEN
        help
          Add some dummy events to the simple dummy driver.
 
 config IIO_SIMPLE_DUMMY_BUFFER
-	boolean "Buffered capture support"
+	bool "Buffered capture support"
 	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	help

drivers/tty/serial/Kconfig

@@ -498,7 +498,7 @@ config SERIAL_MFD_HSU
 	select SERIAL_CORE
 
 config SERIAL_MFD_HSU_CONSOLE
-	boolean "Medfile HSU serial console support"
+	bool "Medfile HSU serial console support"
 	depends on SERIAL_MFD_HSU=y
 	select SERIAL_CORE_CONSOLE
 

drivers/usb/gadget/Kconfig

@@ -45,7 +45,7 @@ menuconfig USB_GADGET
 if USB_GADGET
 
 config USB_GADGET_DEBUG
-	boolean "Debugging messages (DEVELOPMENT)"
+	bool "Debugging messages (DEVELOPMENT)"
 	depends on DEBUG_KERNEL
 	help
 	   Many controller and gadget drivers will print some debugging
@@ -73,7 +73,7 @@ config USB_GADGET_VERBOSE
 	   production build.
 
 config USB_GADGET_DEBUG_FILES
-	boolean "Debugging information files (DEVELOPMENT)"
+	bool "Debugging information files (DEVELOPMENT)"
 	depends on PROC_FS
 	help
 	   Some of the drivers in the "gadget" framework can expose
@@ -84,7 +84,7 @@ config USB_GADGET_DEBUG_FILES
 	   here.  If in doubt, or to conserve kernel memory, say "N".
 
 config USB_GADGET_DEBUG_FS
-	boolean "Debugging information files in debugfs (DEVELOPMENT)"
+	bool "Debugging information files in debugfs (DEVELOPMENT)"
 	depends on DEBUG_FS
 	help
 	   Some of the drivers in the "gadget" framework can expose
@@ -230,7 +230,7 @@ config USB_CONFIGFS
 	  For more information see Documentation/usb/gadget_configfs.txt.
 
 config USB_CONFIGFS_SERIAL
-	boolean "Generic serial bulk in/out"
+	bool "Generic serial bulk in/out"
 	depends on USB_CONFIGFS
 	depends on TTY
 	select USB_U_SERIAL
@@ -239,7 +239,7 @@ config USB_CONFIGFS_SERIAL
 	  The function talks to the Linux-USB generic serial driver.
 
 config USB_CONFIGFS_ACM
-	boolean "Abstract Control Model (CDC ACM)"
+	bool "Abstract Control Model (CDC ACM)"
 	depends on USB_CONFIGFS
 	depends on TTY
 	select USB_U_SERIAL
@@ -249,7 +249,7 @@ config USB_CONFIGFS_ACM
 	  MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
 
 config USB_CONFIGFS_OBEX
-	boolean "Object Exchange Model (CDC OBEX)"
+	bool "Object Exchange Model (CDC OBEX)"
 	depends on USB_CONFIGFS
 	depends on TTY
 	select USB_U_SERIAL
@@ -259,7 +259,7 @@ config USB_CONFIGFS_OBEX
 	  since the kernel itself doesn't implement the OBEX protocol.
 
 config USB_CONFIGFS_NCM
-	boolean "Network Control Model (CDC NCM)"
+	bool "Network Control Model (CDC NCM)"
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
@@ -270,7 +270,7 @@ config USB_CONFIGFS_NCM
 	  different alignment possibilities.
 
 config USB_CONFIGFS_ECM
-	boolean "Ethernet Control Model (CDC ECM)"
+	bool "Ethernet Control Model (CDC ECM)"
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
@@ -282,7 +282,7 @@ config USB_CONFIGFS_ECM
 	  supported by firmware for smart network devices.
 
 config USB_CONFIGFS_ECM_SUBSET
-	boolean "Ethernet Control Model (CDC ECM) subset"
+	bool "Ethernet Control Model (CDC ECM) subset"
 	depends on USB_CONFIGFS
 	depends on NET
 	select USB_U_ETHER
@@ -323,7 +323,7 @@ config USB_CONFIGFS_EEM
 	  the host is the same (a usbX device), so the differences are minimal.
 
 config USB_CONFIGFS_PHONET
-	boolean "Phonet protocol"
+	bool "Phonet protocol"
 	depends on USB_CONFIGFS
 	depends on NET
 	depends on PHONET
@@ -333,7 +333,7 @@ config USB_CONFIGFS_PHONET
 	  The Phonet protocol implementation for USB device.
 
 config USB_CONFIGFS_MASS_STORAGE
-	boolean "Mass storage"
+	bool "Mass storage"
 	depends on USB_CONFIGFS
 	depends on BLOCK
 	select USB_F_MASS_STORAGE
@@ -344,7 +344,7 @@ config USB_CONFIGFS_MASS_STORAGE
 	  specified as a module parameter or sysfs option.
 
 config USB_CONFIGFS_F_LB_SS
-	boolean "Loopback and sourcesink function (for testing)"
+	bool "Loopback and sourcesink function (for testing)"
 	depends on USB_CONFIGFS
 	select USB_F_SS_LB
 	help
@@ -357,7 +357,7 @@ config USB_CONFIGFS_F_LB_SS
 	  and its driver through a basic set of functional tests.
 
 config USB_CONFIGFS_F_FS
-	boolean "Function filesystem (FunctionFS)"
+	bool "Function filesystem (FunctionFS)"
 	depends on USB_CONFIGFS
 	select USB_F_FS
 	help
@@ -369,7 +369,7 @@ config USB_CONFIGFS_F_FS
 	  mass storage) and other are implemented in user space.
 
 config USB_CONFIGFS_F_UAC1
-	boolean "Audio Class 1.0"
+	bool "Audio Class 1.0"
 	depends on USB_CONFIGFS
 	depends on SND
 	select USB_LIBCOMPOSITE
@@ -382,7 +382,7 @@ config USB_CONFIGFS_F_UAC1
 	  on the device.
 
 config USB_CONFIGFS_F_UAC2
-	boolean "Audio Class 2.0"
+	bool "Audio Class 2.0"
 	depends on USB_CONFIGFS
 	depends on SND
 	select USB_LIBCOMPOSITE
@@ -400,7 +400,7 @@ config USB_CONFIGFS_F_UAC2
 	  wants as audio data to the USB Host.
 
 config USB_CONFIGFS_F_MIDI
-	boolean "MIDI function"
+	bool "MIDI function"
 	depends on USB_CONFIGFS
 	depends on SND
 	select USB_LIBCOMPOSITE
@@ -414,7 +414,7 @@ config USB_CONFIGFS_F_MIDI
 	  ALSA's aconnect utility etc.
 
 config USB_CONFIGFS_F_HID
-	boolean "HID function"
+	bool "HID function"
 	depends on USB_CONFIGFS
 	select USB_F_HID
 	help

drivers/usb/gadget/legacy/Kconfig

@@ -40,7 +40,7 @@ config USB_ZERO
 	  dynamically linked module called "g_zero".
 
 config USB_ZERO_HNPTEST
-	boolean "HNP Test Device"
+	bool "HNP Test Device"
 	depends on USB_ZERO && USB_OTG
 	help
 	  You can configure this device to enumerate using the device

drivers/usb/gadget/udc/Kconfig

@@ -198,7 +198,7 @@ config USB_S3C2410
 	  S3C2440 processors.
 
 config USB_S3C2410_DEBUG
-	boolean "S3C2410 udc debug messages"
+	bool "S3C2410 udc debug messages"
 	depends on USB_S3C2410
 
 config USB_S3C_HSUDC
@@ -287,7 +287,7 @@ config USB_NET2272
 	  gadget drivers to also be dynamically linked.
 
 config USB_NET2272_DMA
-	boolean "Support external DMA controller"
+	bool "Support external DMA controller"
 	depends on USB_NET2272 && HAS_DMA
 	help
 	  The NET2272 part can optionally support an external DMA

drivers/usb/phy/Kconfig

@@ -119,7 +119,7 @@ config TAHVO_USB
 
 config TAHVO_USB_HOST_BY_DEFAULT
 	depends on TAHVO_USB
-	boolean "Device in USB host mode by default"
+	bool "Device in USB host mode by default"
 	help
 	  Say Y here, if you want the device to enter USB host mode
 	  by default on bootup.

init/Kconfig

@@ -914,7 +914,7 @@ config NUMA_BALANCING_DEFAULT_ENABLED
 	  machine.
 
 menuconfig CGROUPS
-	boolean "Control Group support"
+	bool "Control Group support"
 	select KERNFS
 	help
 	  This option adds support for grouping sets of processes together, for
@@ -1770,7 +1770,7 @@ config SLABINFO
 	default y
 
 config RT_MUTEXES
-	boolean
+	bool
 
 config BASE_SMALL
 	int

lib/Kconfig

@@ -14,7 +14,7 @@ config BITREVERSE
 	tristate
 
 config RATIONAL
-	boolean
+	bool
 
 config GENERIC_STRNCPY_FROM_USER
 	bool
@@ -39,14 +39,14 @@ config GENERIC_IOMAP
 	select GENERIC_PCI_IOMAP
 
 config GENERIC_IO
-	boolean
+	bool
 	default n
 
 config STMP_DEVICE
 	bool
 
 config PERCPU_RWSEM
-	boolean
+	bool
 
 config ARCH_USE_CMPXCHG_LOCKREF
 	bool
@@ -257,7 +257,7 @@ config DECOMPRESS_LZ4
 # Generic allocator support is selected if needed
 #
 config GENERIC_ALLOCATOR
-	boolean
+	bool
 
 #
 # reed solomon support is select'ed if needed
@@ -266,16 +266,16 @@ config REED_SOLOMON
 	tristate
 	
 config REED_SOLOMON_ENC8
-	boolean
+	bool
 
 config REED_SOLOMON_DEC8
-	boolean
+	bool
 
 config REED_SOLOMON_ENC16
-	boolean
+	bool
 
 config REED_SOLOMON_DEC16
-	boolean
+	bool
 
 #
 # BCH support is selected if needed
@@ -284,7 +284,7 @@ config BCH
 	tristate
 
 config BCH_CONST_PARAMS
-	boolean
+	bool
 	help
 	  Drivers may select this option to force specific constant
 	  values for parameters 'm' (Galois field order) and 't'
@@ -320,7 +320,7 @@ config BCH_CONST_T
 # Textsearch support is select'ed if needed
 #
 config TEXTSEARCH
-	boolean
+	bool
 
 config TEXTSEARCH_KMP
 	tristate
@@ -332,10 +332,10 @@ config TEXTSEARCH_FSM
 	tristate
 
 config BTREE
-	boolean
+	bool
 
 config INTERVAL_TREE
-	boolean
+	bool
 	help
 	  Simple, embeddable, interval-tree. Can find the start of an
 	  overlapping range in log(n) time and then iterate over all
@@ -363,18 +363,18 @@ config ASSOCIATIVE_ARRAY
 	  for more information.
 
 config HAS_IOMEM
-	boolean
+	bool
 	depends on !NO_IOMEM
 	select GENERIC_IO
 	default y
 
 config HAS_IOPORT_MAP
-	boolean
+	bool
 	depends on HAS_IOMEM && !NO_IOPORT_MAP
 	default y
 
 config HAS_DMA
-	boolean
+	bool
 	depends on !NO_DMA
 	default y
 

mm/Kconfig

@@ -129,28 +129,28 @@ config SPARSEMEM_VMEMMAP
 	 efficient option when sufficient kernel resources are available.
 
 config HAVE_MEMBLOCK
-	boolean
+	bool
 
 config HAVE_MEMBLOCK_NODE_MAP
-	boolean
+	bool
 
 config HAVE_MEMBLOCK_PHYS_MAP
-	boolean
+	bool
 
 config HAVE_GENERIC_RCU_GUP
-	boolean
+	bool
 
 config ARCH_DISCARD_MEMBLOCK
-	boolean
+	bool
 
 config NO_BOOTMEM
-	boolean
+	bool
 
 config MEMORY_ISOLATION
-	boolean
+	bool
 
 config MOVABLE_NODE
-	boolean "Enable to assign a node which has only movable memory"
+	bool "Enable to assign a node which has only movable memory"
 	depends on HAVE_MEMBLOCK
 	depends on NO_BOOTMEM
 	depends on X86_64
@@ -228,12 +228,12 @@ config SPLIT_PTLOCK_CPUS
 	default "4"
 
 config ARCH_ENABLE_SPLIT_PMD_PTLOCK
-	boolean
+	bool
 
 #
 # support for memory balloon
 config MEMORY_BALLOON
-	boolean
+	bool
 
 #
 # support for memory balloon compaction
@@ -276,7 +276,7 @@ config MIGRATION
 	  allocation instead of reclaiming.
 
 config ARCH_ENABLE_HUGEPAGE_MIGRATION
-	boolean
+	bool
 
 config PHYS_ADDR_T_64BIT
 	def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT

net/Kconfig

@@ -231,18 +231,18 @@ source "net/hsr/Kconfig"
 source "net/switchdev/Kconfig"
 
 config RPS
-	boolean
+	bool
 	depends on SMP && SYSFS
 	default y
 
 config RFS_ACCEL
-	boolean
+	bool
 	depends on RPS
 	select CPU_RMAP
 	default y
 
 config XPS
-	boolean
+	bool
 	depends on SMP
 	default y
 
@@ -254,18 +254,18 @@ config CGROUP_NET_PRIO
 	  a per-interface basis.
 
 config CGROUP_NET_CLASSID
-	boolean "Network classid cgroup"
+	bool "Network classid cgroup"
 	depends on CGROUPS
 	---help---
 	  Cgroup subsystem for use as general purpose socket classid marker that is
 	  being used in cls_cgroup and for netfilter matching.
 
 config NET_RX_BUSY_POLL
-	boolean
+	bool
 	default y
 
 config BQL
-	boolean
+	bool
 	depends on SYSFS
 	select DQL
 	default y
@@ -282,7 +282,7 @@ config BPF_JIT
 	  this feature changing /proc/sys/net/core/bpf_jit_enable
 
 config NET_FLOW_LIMIT
-	boolean
+	bool
 	depends on RPS
 	default y
 	---help---

net/sched/Kconfig

@@ -348,7 +348,7 @@ config NET_SCH_PLUG
 comment "Classification"
 
 config NET_CLS
-	boolean
+	bool
 
 config NET_CLS_BASIC
 	tristate "Elementary classification (BASIC)"

net/switchdev/Kconfig

@@ -3,7 +3,7 @@
 #
 
 config NET_SWITCHDEV
-	boolean "Switch (and switch-ish) device support (EXPERIMENTAL)"
+	bool "Switch (and switch-ish) device support (EXPERIMENTAL)"
 	depends on INET
 	---help---
 	  This module provides glue between core networking code and device

security/integrity/Kconfig

@@ -16,7 +16,7 @@ config INTEGRITY
 if INTEGRITY
 
 config INTEGRITY_SIGNATURE
-	boolean "Digital signature verification using multiple keyrings"
+	bool "Digital signature verification using multiple keyrings"
 	depends on KEYS
 	default n
 	select SIGNATURE
@@ -30,7 +30,7 @@ config INTEGRITY_SIGNATURE
 	  usually only added from initramfs.
 
 config INTEGRITY_ASYMMETRIC_KEYS
-	boolean "Enable asymmetric keys support"
+	bool "Enable asymmetric keys support"
 	depends on INTEGRITY_SIGNATURE
 	default n
         select ASYMMETRIC_KEY_TYPE

security/integrity/evm/Kconfig

 config EVM
-	boolean "EVM support"
+	bool "EVM support"
 	select KEYS
 	select ENCRYPTED_KEYS
 	select CRYPTO_HMAC