ARM: dts: vf610: ZII: Add missing phy-mode and fixed links

The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Vybrid FEC is a Fast Ethrnet using RMII.

Additionally, the cpu label has never actually been used in the
binding, so remove it.

Lastly, for DSA links between switches, add a fixed-link node
indicating the expected speed/duplex of the link.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/vf610-zii-cfu1.dts

@@ -202,7 +202,7 @@ port@5 {
 
 				port@6 {
 					reg = <6>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -75,7 +75,7 @@ fixed-link {
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {

arch/arm/boot/dts/vf610-zii-dev-rev-c.dts

@@ -44,7 +44,7 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -82,6 +82,11 @@ switch0port10: port@10 {
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch1port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 
@@ -174,6 +179,11 @@ switch1port10: port@10 {
 						label = "dsa";
 						phy-mode = "xaui";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 				mdio {

arch/arm/boot/dts/vf610-zii-scu4-aib.dts

@@ -59,7 +59,7 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
+						phy-mode = "rmii";
 						ethernet = <&fec1>;
 
 						fixed-link {
@@ -115,6 +115,11 @@ switch0port10: port@10 {
 						link = <&switch1port10
 							&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -156,6 +161,11 @@ switch1port9: port@9 {
 						phy-mode = "xgmii";
 						link = <&switch3port10
 							&switch2port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 
 					switch1port10: port@10 {
@@ -163,6 +173,11 @@ switch1port10: port@10 {
 						label = "dsa";
 						phy-mode = "xgmii";
 						link = <&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -246,6 +261,11 @@ switch2port10: port@10 {
 						link = <&switch3port9
 							&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 				};
 			};
@@ -295,6 +315,11 @@ switch3port9: port@9 {
 						label = "dsa";
 						phy-mode = "2500base-x";
 						link = <&switch2port10>;
+
+						fixed-link {
+							speed = <2500>;
+							full-duplex;
+						};
 					};
 
 					switch3port10: port@10 {
@@ -303,6 +328,11 @@ switch3port10: port@10 {
 						phy-mode = "xgmii";
 						link = <&switch1port9
 							&switch0port10>;
+
+						fixed-link {
+							speed = <10000>;
+							full-duplex;
+						};
 					};
 				};
 			};

arch/arm/boot/dts/vf610-zii-spb4.dts

@@ -140,7 +140,7 @@ ports {
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {

arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts

@@ -129,7 +129,7 @@ ports {
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {

arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts

@@ -154,7 +154,7 @@ ports {
 
 				port@0 {
 					reg = <0>;
-					label = "cpu";
+					phy-mode = "rmii";
 					ethernet = <&fec1>;
 
 					fixed-link {