Commit 63ab664c authored by Darek Zielski's avatar Darek Zielski Committed by Mauro Carvalho Chehab

[media] saa7134: add Leadtek Winfast TV2100 FM card support

Add Leadtek Winfast TV2100 FM card to saa7134 driver. It is a card bearing
SAA7130HL chip.
Signed-off-by: default avatarDarek Zielski <dz1125tor@gmail.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@osg.samsung.com>
parent 67dcfebd
......@@ -193,3 +193,4 @@
192 -> AverMedia AverTV Satellite Hybrid+FM A706 [1461:2055]
193 -> WIS Voyager or compatible [1905:7007]
194 -> AverMedia AverTV/505 [1461:a10a]
195 -> Leadtek Winfast TV2100 FM [107d:6f3a]
......@@ -5884,6 +5884,42 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE1,
},
},
[SAA7134_BOARD_LEADTEK_WINFAST_TV2100_FM] = {
.name = "Leadtek Winfast TV2100 FM",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_TNF_5335MF,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.gpiomask = 0x0d,
.inputs = {{
.name = name_tv_mono,
.vmux = 1,
.amux = LINE1,
.gpio = 0x00,
.tv = 1,
}, {
.name = name_comp1,
.vmux = 3,
.amux = LINE2,
.gpio = 0x08,
}, {
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
.gpio = 0x08,
} },
.radio = {
.name = name_radio,
.amux = LINE1,
.gpio = 0x04,
},
.mute = {
.name = name_mute,
.amux = LINE1,
.gpio = 0x08,
},
},
};
......@@ -7148,6 +7184,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0xa10a,
.driver_data = SAA7134_BOARD_AVERMEDIA_505,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x107d,
.subdevice = 0x6f3a,
.driver_data = SAA7134_BOARD_LEADTEK_WINFAST_TV2100_FM,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -7545,6 +7587,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM:
case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
case SAA7134_BOARD_LEADTEK_WINFAST_TV2100_FM:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
......
......@@ -835,6 +835,13 @@ int saa7134_input_init1(struct saa7134_dev *dev)
mask_keycode = 0xffff;
raw_decode = true;
break;
case SAA7134_BOARD_LEADTEK_WINFAST_TV2100_FM:
ir_codes = RC_MAP_LEADTEK_Y04G0051;
mask_keydown = 0x0040000; /* Enable GPIO18 line on both edges */
mask_keyup = 0x0040000;
mask_keycode = 0xffff;
raw_decode = true;
break;
}
if (NULL == ir_codes) {
pr_err("Oops: IR config error [card=%d]\n", dev->board);
......
......@@ -342,6 +342,7 @@ struct saa7134_card_ir {
#define SAA7134_BOARD_AVERMEDIA_A706 192
#define SAA7134_BOARD_WIS_VOYAGER 193
#define SAA7134_BOARD_AVERMEDIA_505 194
#define SAA7134_BOARD_LEADTEK_WINFAST_TV2100_FM 195
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment