Commit 63b94278 authored by Ofer Heifetz's avatar Ofer Heifetz Committed by Herbert Xu

crypto: inside-secure - set tx_max_cmd_queue to 32

The ORO bridge (connected to the EIP197 write channel) does not
generate back pressure towards the EIP197 when its internal FIFO is
full. It assumes that the EIP will not drive more write transactions
than the maximal supported outstanding (32).

Hence tx_max_cmd_queue must be configured to 5 (or less).
Signed-off-by: default avatarOfer Heifetz <oferh@marvell.com>
Signed-off-by: default avatarAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent f1edf29a
......@@ -306,6 +306,10 @@ static int safexcel_hw_init(struct safexcel_crypto_priv *priv)
else if (((version >> 16) & 0xffff) == EIP197_HIA_VERSION_LE)
val |= (EIP197_MST_CTRL_NO_BYTE_SWAP >> 24);
/* For EIP197 set maximum number of TX commands to 2^5 = 32 */
if (priv->version == EIP197B || priv->version == EIP197D)
val |= EIP197_MST_CTRL_TX_MAX_CMD(5);
writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
/* Configure wr/rd cache values */
......
......@@ -222,6 +222,7 @@
#define WR_CACHE_4BITS (WR_CACHE_3BITS << 1 | BIT(0))
#define EIP197_MST_CTRL_RD_CACHE(n) (((n) & 0xf) << 0)
#define EIP197_MST_CTRL_WD_CACHE(n) (((n) & 0xf) << 4)
#define EIP197_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 20)
#define EIP197_MST_CTRL_BYTE_SWAP BIT(24)
#define EIP197_MST_CTRL_NO_BYTE_SWAP BIT(25)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment