Skip to content

L
linux
Commit 63e30271 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci 

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...
parents 277edbab 6e6f498b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5642 additions and 1145 deletions
Documentation/devicetree/bindings/pci/designware-pcie.txt
View file @ 63e30271
......@@ -28,3 +28,20 @@ Optional properties:
- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
Example configuration:
pcie: pcie@0xdffff000 {
compatible = "snps,dw-pcie";
reg = <0xdffff000 0x1000>, /* Controller registers */
<0xd0000000 0x2000>; /* PCI config space */
reg-names = "ctrlreg", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
interrupts = <25>, <24>;
#interrupt-cells = <1>;
num-lanes = <1>;
};
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
View file @ 63e30271
......@@ -13,6 +13,13 @@ Required properties:
- clock-names: Must include the following additional entries:
- "pcie_phy"
Optional properties:
- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
Example:
pcie@0x01000000 {
......
Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt 0 → 100644
View file @ 63e30271
* ThunderX PCI host controller for pass-1.x silicon
Firmware-initialized PCI host controller to on-chip devices found on
some Cavium ThunderX processors. These devices have ECAM-based config
access, but the BARs are all at fixed addresses. We handle the fixed
addresses by synthesizing Enhanced Allocation (EA) capabilities for
these devices.
The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.
Properties of the host controller node that differ from
host-generic-pci.txt:
- compatible : Must be "cavium,pci-host-thunder-ecam"
Example:
pcie@84b000000000 {
compatible = "cavium,pci-host-thunder-ecam";
device_type = "pci";
msi-parent = <&its>;
msi-map = <0 &its 0x30000 0x10000>;
bus-range = <0 31>;
#size-cells = <2>;
#address-cells = <3>;
#stream-id-cells = <1>;
reg = <0x84b0 0x00000000 0 0x02000000>; /* Configuration space */
ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
};
Documentation/devicetree/bindings/pci/pci-thunder-pem.txt 0 → 100644
View file @ 63e30271
* ThunderX PEM PCIe host controller
Firmware-initialized PCI host controller found on some Cavium
ThunderX processors.
The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.
Properties of the host controller node that differ from
host-generic-pci.txt:
- compatible : Must be "cavium,pci-host-thunder-pem"
- reg : Two entries: First the configuration space for down
stream devices base address and size, as accessed
from the parent bus. Second, the register bank of
the PEM device PCIe bridge.
Example:
pci@87e0,c2000000 {
compatible = "cavium,pci-host-thunder-pem";
device_type = "pci";
msi-parent = <&its>;
msi-map = <0 &its 0x10000 0x10000>;
bus-range = <0x8f 0xc7>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */
<0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
<0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
<0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
<0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
};
Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt 0 → 100644
View file @ 63e30271
* Xilinx NWL PCIe Root Port Bridge DT description
Required properties:
- compatible: Should contain "xlnx,nwl-pcie-2.11"
- #address-cells: Address representation for root ports, set to <3>
- #size-cells: Size representation for root ports, set to <2>
- #interrupt-cells: specifies the number of cells needed to encode an
interrupt source. The value must be 1.
- reg: Should contain Bridge, PCIe Controller registers location,
configuration space, and length
- reg-names: Must include the following entries:
"breg": bridge registers
"pcireg": PCIe controller registers
"cfg": configuration space region
- device_type: must be "pci"
- interrupts: Should contain NWL PCIe interrupt
- interrupt-names: Must include the following entries:
"msi1, msi0": interrupt asserted when MSI is received
"intx": interrupt asserted when a legacy interrupt is received
"misc": interrupt asserted when miscellaneous is received
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
mapping of the PCI interface to interrupt numbers.
- ranges: ranges for the PCI memory regions (I/O space region is not
supported by hardware)
Please refer to the standard PCI bus binding document for a more
detailed explanation
- msi-controller: indicates that this is MSI controller node
- msi-parent: MSI parent of the root complex itself
- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: should be set to 1
- #address-cells: specifies the number of cells needed to encode an
address. The value must be 0.
Example:
++++++++
nwl_pcie: pcie@fd0e0000 {
#address-cells = <3>;
#size-cells = <2>;
compatible = "xlnx,nwl-pcie-2.11";
#interrupt-cells = <1>;
msi-controller;
device_type = "pci";
interrupt-parent = <&gic>;
interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
msi-parent = <&nwl_pcie>;
reg = <0x0 0xfd0e0000 0x0 0x1000>,
<0x0 0xfd480000 0x0 0x1000>,
<0x0 0xe0000000 0x0 0x1000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
Documentation/devicetree/bindings/pci/xilinx-pcie.txt
View file @ 63e30271
......@@ -17,7 +17,7 @@ Required properties:
Please refer to the standard PCI bus binding document for a more
detailed explanation
Optional properties:
Optional properties for Zynq/Microblaze:
- bus-range: PCI bus numbers covered
Interrupt controller child node
......@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
Example:
++++++++
Zynq:
pci_express: axi-pcie@50000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
reg = < 0x50000000 0x10000000 >;
reg = < 0x50000000 0x1000000 >;
device_type = "pci";
interrupts = < 0 52 4 >;
interrupt-map-mask = <0 0 0 7>;
......@@ -60,3 +60,29 @@ Example:
#interrupt-cells = <1>;
};
};
Microblaze:
pci_express: axi-pcie@10000000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "xlnx,axi-pcie-host-1.00.a";
reg = <0x10000000 0x4000000>;
device_type = "pci";
interrupt-parent = <&microblaze_0_intc>;
interrupts = <1 2>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc 1>,
<0 0 0 2 &pcie_intc 2>,
<0 0 0 3 &pcie_intc 3>,
<0 0 0 4 &pcie_intc 4>;
ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
pcie_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
MAINTAINERS
View file @ 63e30271
......@@ -5205,6 +5205,7 @@ F: arch/x86/kernel/cpu/mshyperv.c
F: drivers/hid/hid-hyperv.c
F: drivers/hv/
F: drivers/input/serio/hyperv-keyboard.c
F: drivers/pci/host/pci-hyperv.c
F: drivers/net/hyperv/
F: drivers/scsi/storvsc_drv.c
F: drivers/video/fbdev/hyperv_fb.c
......@@ -8383,12 +8384,20 @@ L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*designware*
PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
M: Joao Pinto <jpinto@synopsys.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/pci/designware-pcie.txt
F: drivers/pci/host/pcie-designware-plat.c
PCI DRIVER FOR GENERIC OF HOSTS
M: Will Deacon <will.deacon@arm.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/host/pci-host-common.c
F: drivers/pci/host/pci-host-generic.c
PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
......@@ -8434,6 +8443,14 @@ L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/pci/host/*qcom*
PCIE DRIVER FOR CAVIUM THUNDERX
M: David Daney <david.daney@cavium.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/pci/pci-thunder-*
F: drivers/pci/host/pci-thunder-*
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
......
arch/alpha/include/asm/pci.h
View file @ 63e30271
......@@ -7,7 +7,6 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <asm/machvec.h>
#include <asm-generic/pci-bridge.h>
/*
* The following structure is used to manage multiple PCI busses.
......@@ -66,13 +65,6 @@ extern void pcibios_set_master(struct pci_dev *dev);
decisions. */
#define PCI_DMA_BUS_IS_PHYS 0
#ifdef CONFIG_PCI
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
#endif
/* TODO: integrate with include/asm-generic/pci.h ? */
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
......
arch/arc/Kconfig
View file @ 63e30271
......@@ -17,6 +17,7 @@ config ARC
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
......@@ -37,6 +38,9 @@ config ARC
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
config MIGHT_HAVE_PCI
bool
config TRACE_IRQFLAGS_SUPPORT
def_bool y
......@@ -569,6 +573,28 @@ config FORCE_MAX_ZONEORDER
source "net/Kconfig"
source "drivers/Kconfig"
menu "Bus Support"
config PCI
bool "PCI support" if MIGHT_HAVE_PCI
help
PCI is the name of a bus system, i.e., the way the CPU talks to
the other stuff inside your box. Find out if your board/platform
has PCI.
Note: PCIe support for Synopsys Device will be available only
when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
say Y, otherwise N.
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
endmenu
source "fs/Kconfig"
source "arch/arc/Kconfig.debug"
source "security/Kconfig"
......
arch/arc/include/asm/dma.h
View file @ 63e30271
......@@ -10,5 +10,10 @@
#define ASM_ARC_DMA_H
#define MAX_DMA_ADDRESS 0xC0000000
#ifdef CONFIG_PCI
extern int isa_dma_bridge_buggy;
#else
#define isa_dma_bridge_buggy 0
#endif
#endif
arch/arc/include/asm/io.h
View file @ 63e30271
......@@ -16,6 +16,15 @@
extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
unsigned long flags);
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return (void __iomem *)port;
}
static inline void ioport_unmap(void __iomem *addr)
{
}
extern void iounmap(const void __iomem *addr);
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
......
arch/arc/include/asm/pci.h 0 → 100644
View file @ 63e30271
/*
* Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _ASM_ARC_PCI_H
#define _ASM_ARC_PCI_H
#ifdef __KERNEL__
#include <linux/ioport.h>
#define PCIBIOS_MIN_IO 0x100
#define PCIBIOS_MIN_MEM 0x100000
#define pcibios_assign_all_busses() 1
/*
* The PCI address space does equal the physical memory address space.
* The networking and block device layers use this boolean for bounce
* buffer decisions.
*/
#define PCI_DMA_BUS_IS_PHYS 1
#endif /* __KERNEL__ */
#endif /* _ASM_ARC_PCI_H */
arch/arc/kernel/Makefile
View file @ 63e30271
......@@ -12,6 +12,7 @@ obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o
obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o
obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += arcksyms.o module.o
obj-$(CONFIG_SMP) += smp.o
......
arch/arc/kernel/pcibios.c 0 → 100644
View file @ 63e30271
/*
* Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/pci.h>
/*
* We don't have to worry about legacy ISA devices, so nothing to do here
*/
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
return res->start;
}
void pcibios_fixup_bus(struct pci_bus *bus)
{
}
arch/arc/plat-axs10x/Kconfig
View file @ 63e30271
......@@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
select MIGHT_HAVE_PCI
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
help
......
arch/arm/Kconfig
View file @ 63e30271
......@@ -1212,7 +1212,6 @@ config PCI_HOST_ITE8152
select DMABOUNCE
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pcmcia/Kconfig"
......
arch/arm/include/asm/pci.h
View file @ 63e30271
......@@ -2,9 +2,6 @@
#define ASMARM_PCI_H
#ifdef __KERNEL__
#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci-bridge.h>
#include <asm/mach/pci.h> /* for pci_sys_data */
extern unsigned long pcibios_min_io;
......@@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
}
#endif /* __KERNEL__ */
#endif
arch/arm64/Kconfig
View file @ 63e30271
......@@ -235,8 +235,6 @@ config PCI_SYSCALL
def_bool PCI
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
......
arch/arm64/include/asm/Kbuild
View file @ 63e30271
generic-y += bug.h
generic-y += bugs.h
generic-y += checksum.h
......@@ -31,7 +29,6 @@ generic-y += msgbuf.h
generic-y += msi.h
generic-y += mutex.h
generic-y += pci.h
generic-y += pci-bridge.h
generic-y += poll.h
generic-y += preempt.h
generic-y += resource.h
......
arch/arm64/include/asm/pci.h
View file @ 63e30271
......@@ -7,8 +7,6 @@
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm-generic/pci-bridge.h>
#include <asm-generic/pci-dma-compat.h>
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0
......
arch/arm64/kernel/pci.c
View file @ 63e30271
......@@ -19,8 +19,6 @@
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <asm/pci-bridge.h>
/*
* Called after each bus is probed, but before its children are examined
*/
......
arch/avr32/include/asm/pci.h
View file @ 63e30271
......@@ -5,6 +5,4 @@
#define PCI_DMA_BUS_IS_PHYS (1)
#include <asm-generic/pci-dma-compat.h>
#endif /* __ASM_AVR32_PCI_H__ */
arch/blackfin/Kconfig
View file @ 63e30271
......@@ -1233,8 +1233,6 @@ source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "Executable file formats"
......
arch/blackfin/include/asm/pci.h
View file @ 63e30271
......@@ -4,7 +4,6 @@
#define _ASM_BFIN_PCI_H
#include <linux/scatterlist.h>
#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci.h>
#define PCIBIOS_MIN_IO 0x00001000
......
arch/cris/include/asm/pci.h
View file @ 63e30271
......@@ -48,9 +48,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
/* generic pci stuff */
#include <asm-generic/pci.h>
......
arch/frv/include/asm/pci.h
View file @ 63e30271
......@@ -15,7 +15,6 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci.h>
struct pci_dev;
......@@ -32,12 +31,6 @@ extern void consistent_sync_page(struct page *page, unsigned long offset,
size_t size, int direction);
#endif
extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
dma_addr_t *dma_handle);
extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle);
/* Return the index of the PCI controller for device PDEV. */
#define pci_controller_num(PDEV) (0)
......
arch/ia64/Kconfig
View file @ 63e30271
......@@ -574,12 +574,8 @@ config PCI_DOMAINS
config PCI_SYSCALL
def_bool PCI
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pci/hotplug/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
......
arch/ia64/include/asm/pci.h
View file @ 63e30271
......@@ -50,8 +50,6 @@ struct pci_dev;
extern unsigned long ia64_max_iommu_merge_mask;
#define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL)
#include <asm-generic/pci-dma-compat.h>
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
......
arch/ia64/pci/fixup.c
View file @ 63e30271
......@@ -17,14 +17,14 @@
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
* card will have it's BIOS copied to C0000 in system RAM.
* card will have its BIOS copied to 0xC0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. Before marking the device
* with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
* by either arch cde or vga-arbitration, if so only apply the fixup to this
* already determined primary video card.
* by either arch code or vga-arbitration; if so only apply the fixup to this
* already-determined primary video card.
*/
static void pci_fixup_video(struct pci_dev *pdev)
......@@ -32,6 +32,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
struct resource *res;
if ((strcmp(ia64_platform_name, "dig") != 0)
&& (strcmp(ia64_platform_name, "hpzx1") != 0))
......@@ -61,8 +62,18 @@ static void pci_fixup_video(struct pci_dev *pdev)
if (!vga_default_device() || pdev == vga_default_device()) {
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
res = &pdev->resource[PCI_ROM_RESOURCE];
pci_disable_rom(pdev);
if (res->parent)
release_resource(res);
res->start = 0xC0000;
res->end = res->start + 0x20000 - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
IORESOURCE_PCI_FIXED;
dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
res);
}
}
}
......
arch/ia64/sn/kernel/io_acpi_init.c
View file @ 63e30271
......@@ -429,7 +429,8 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
void __iomem *addr;
struct pcidev_info *pcidev_info = NULL;
struct sn_irq_info *sn_irq_info = NULL;
size_t image_size, size;
struct resource *res;
size_t size;
if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
panic("%s: Failure obtaining pcidev_info for %s\n",
......@@ -443,17 +444,20 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
* of the shadowed copy, and the actual length of the ROM image.
*/
size = pci_resource_len(dev, PCI_ROM_RESOURCE);
addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
size);
image_size = pci_get_rom_size(dev, addr, size);
dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
dev->resource[PCI_ROM_RESOURCE].end =
(unsigned long) addr + image_size - 1;
dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY;
res = &dev->resource[PCI_ROM_RESOURCE];
pci_disable_rom(dev);
if (res->parent)
release_resource(res);
res->start = pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE];
res->end = res->start + size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
IORESOURCE_PCI_FIXED;
}
sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
}
EXPORT_SYMBOL(sn_acpi_slot_fixup);
......
arch/ia64/sn/kernel/io_init.c
View file @ 63e30271
......@@ -150,7 +150,8 @@ void
sn_io_slot_fixup(struct pci_dev *dev)
{
int idx;
unsigned long addr, end, size, start;
struct resource *res;
unsigned long addr, size;
struct pcidev_info *pcidev_info;
struct sn_irq_info *sn_irq_info;
int status;
......@@ -175,55 +176,41 @@ sn_io_slot_fixup(struct pci_dev *dev)
/* Copy over PIO Mapped Addresses */
for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
if (!pcidev_info->pdi_pio_mapped_addr[idx]) {
if (!pcidev_info->pdi_pio_mapped_addr[idx])
continue;
}
start = dev->resource[idx].start;
end = dev->resource[idx].end;
size = end - start;
if (size == 0) {
res = &dev->resource[idx];
size = res->end - res->start;
if (size == 0)
continue;
}
addr = pcidev_info->pdi_pio_mapped_addr[idx];
addr = ((addr << 4) >> 4) | __IA64_UNCACHED_OFFSET;
dev->resource[idx].start = addr;
dev->resource[idx].end = addr + size;
res->start = pcidev_info->pdi_pio_mapped_addr[idx];
res->end = addr + size;
/*
* if it's already in the device structure, remove it before
* inserting
*/
if (dev->resource[idx].parent && dev->resource[idx].parent->child)
release_resource(&dev->resource[idx]);
if (res->parent && res->parent->child)
release_resource(res);
if (dev->resource[idx].flags & IORESOURCE_IO)
insert_resource(&ioport_resource, &dev->resource[idx]);
if (res->flags & IORESOURCE_IO)
insert_resource(&ioport_resource, res);
else
insert_resource(&iomem_resource, &dev->resource[idx]);
insert_resource(&iomem_resource, res);
/*
* If ROM, set the actual ROM image size, and mark as
* shadowed in PROM.
* If ROM, mark as shadowed in PROM.
*/
if (idx == PCI_ROM_RESOURCE) {
size_t image_size;
void __iomem *rom;
rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
size + 1);
image_size = pci_get_rom_size(dev, rom, size + 1);
dev->resource[PCI_ROM_RESOURCE].end =
dev->resource[PCI_ROM_RESOURCE].start +
image_size - 1;
dev->resource[PCI_ROM_RESOURCE].flags |=
IORESOURCE_ROM_BIOS_COPY;
pci_disable_rom(dev);
res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
IORESOURCE_PCI_FIXED;
}
}
sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
}
EXPORT_SYMBOL(sn_io_slot_fixup);
/*
......
arch/m32r/Kconfig
View file @ 63e30271
......@@ -387,8 +387,6 @@ config ISA
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
......
arch/m68k/include/asm/pci.h
View file @ 63e30271
#ifndef _ASM_M68K_PCI_H
#define _ASM_M68K_PCI_H
#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci.h>
/* The PCI address space does equal the physical memory
......
arch/microblaze/Kconfig
View file @ 63e30271
......@@ -267,6 +267,9 @@ config PCI
config PCI_DOMAINS
def_bool PCI
config PCI_DOMAINS_GENERIC
def_bool PCI_DOMAINS
config PCI_SYSCALL
def_bool PCI
......
arch/microblaze/include/asm/pci.h
View file @ 63e30271
......@@ -22,8 +22,6 @@
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm-generic/pci-dma-compat.h>
#define PCIBIOS_MIN_IO 0x1000
#define PCIBIOS_MIN_MEM 0x10000000
......
arch/microblaze/pci/pci-common.c
View file @ 63e30271
......@@ -123,17 +123,6 @@ unsigned long pci_address_to_pio(phys_addr_t address)
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
/*
* Return the domain number for this bus.
*/
int pci_domain_nr(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
return hose->global_number;
}
EXPORT_SYMBOL(pci_domain_nr);
/* This routine is meant to be used early during boot, when the
* PCI bus numbers have not yet been assigned, and you need to
* issue PCI config cycles to an OF device.
......@@ -863,26 +852,10 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
void pcibios_fixup_bus(struct pci_bus *bus)
{
/* When called from the generic PCI probe, read PCI<->PCI bridge
* bases. This is -not- called when generating the PCI tree from
* the OF device-tree.
*/
if (bus->self != NULL)
pci_read_bridge_bases(bus);
/* Now fixup the bus bus */
pcibios_setup_bus_self(bus);
/* Now fixup devices on that bus */
pcibios_setup_bus_devices(bus);
/* nothing to do */
}
EXPORT_SYMBOL(pcibios_fixup_bus);
static int skip_isa_ioresource_align(struct pci_dev *dev)
{
return 0;
}
/*
* We need to avoid collisions with `mirrored' VGA ports
* and other strange ISA hardware, so we always want the
......@@ -899,20 +872,18 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
if (skip_isa_ioresource_align(dev))
return start;
if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
}
return start;
return res->start;
}
EXPORT_SYMBOL(pcibios_align_resource);
int pcibios_add_device(struct pci_dev *dev)
{
dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
return 0;
}
EXPORT_SYMBOL(pcibios_add_device);
/*
* Reparent resource children of pr that conflict with res
* under res, and make res replace those children.
......@@ -1333,13 +1304,6 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
(unsigned long)hose->io_base_virt - _IO_BASE);
}
struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
{
struct pci_controller *hose = bus->sysdata;
return of_node_get(hose->dn);
}
static void pcibios_scan_phb(struct pci_controller *hose)
{
LIST_HEAD(resources);
......
arch/mips/Kconfig
View file @ 63e30271
......@@ -2871,8 +2871,6 @@ config PCI_DOMAINS
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
#
# ISA support is now enabled via select. Too many systems still have the one
# or other ISA chip on the board that users don't know about so don't expect
......@@ -2932,8 +2930,6 @@ config ZONE_DMA32
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
config RAPIDIO
tristate "RapidIO support"
depends on PCI
......
arch/mips/include/asm/pci.h
View file @ 63e30271
......@@ -102,7 +102,6 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
#include <linux/scatterlist.h>
#include <linux/string.h>
#include <asm/io.h>
#include <asm-generic/pci-bridge.h>
struct pci_dev;
......@@ -125,9 +124,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
......
arch/mips/pci/fixup-loongson3.c
View file @ 63e30271
......@@ -40,20 +40,25 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
static void pci_fixup_radeon(struct pci_dev *pdev)
{
if (pdev->resource[PCI_ROM_RESOURCE].start)
struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
if (res->start)
return;
if (!loongson_sysconf.vgabios_addr)
return;
pdev->resource[PCI_ROM_RESOURCE].start =
loongson_sysconf.vgabios_addr;
pdev->resource[PCI_ROM_RESOURCE].end =
loongson_sysconf.vgabios_addr + 256*1024 - 1;
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_COPY;
pci_disable_rom(pdev);
if (res->parent)
release_resource(res);
res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr);
res->end = res->start + 256*1024 - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
IORESOURCE_PCI_FIXED;
dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
PCI_ROM_RESOURCE, &pdev->resource[PCI_ROM_RESOURCE]);
PCI_ROM_RESOURCE, res);
}
DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
......
arch/mn10300/include/asm/pci.h
View file @ 63e30271
......@@ -80,9 +80,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return channel ? 15 : 14;
......
arch/parisc/include/asm/pci.h
View file @ 63e30271
......@@ -194,9 +194,6 @@ extern void pcibios_init_bridge(struct pci_dev *);
#define PCIBIOS_MIN_IO 0x10
#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */
/* export the pci_ DMA API in terms of the dma_ one */
#include <asm-generic/pci-dma-compat.h>
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return channel ? 15 : 14;
......
arch/powerpc/Kconfig
View file @ 63e30271
......@@ -828,14 +828,10 @@ config PCI_8260
select PPC_INDIRECT_PCI
default y
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
config HAS_RAPIDIO
bool
default n
......
arch/powerpc/include/asm/pci-bridge.h
View file @ 63e30271
......@@ -10,7 +10,6 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
#include <asm-generic/pci-bridge.h>
struct device_node;
......
arch/powerpc/include/asm/pci.h
View file @ 63e30271
......@@ -20,8 +20,6 @@
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm-generic/pci-dma-compat.h>
/* Return values for pci_controller_ops.probe_mode function */
#define PCI_PROBE_NONE -1 /* Don't look at this bus at all */
#define PCI_PROBE_NORMAL 0 /* Do normal PCI probing */
......
arch/s390/Kconfig
View file @ 63e30271
......@@ -605,8 +605,6 @@ config PCI_NR_MSI
PCI devices.
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endif # PCI
......
arch/s390/include/asm/pci.h
View file @ 63e30271
......@@ -9,7 +9,6 @@
#include <linux/pci.h>
#include <linux/mutex.h>
#include <asm-generic/pci.h>
#include <asm-generic/pci-dma-compat.h>
#include <asm/pci_clp.h>
#include <asm/pci_debug.h>
......
arch/sh/Kconfig
View file @ 63e30271
......@@ -847,14 +847,10 @@ config PCI
config PCI_DOMAINS
bool
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "Executable file formats"
......
arch/sh/include/asm/pci.h
View file @ 63e30271
......@@ -105,9 +105,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? 15 : 14;
}
/* generic DMA-mapping stuff */
#include <asm-generic/pci-dma-compat.h>
#endif /* __KERNEL__ */
#endif /* __ASM_SH_PCI_H */
arch/sparc/include/asm/pci.h
View file @ 63e30271
......@@ -5,7 +5,4 @@
#else
#include <asm/pci_32.h>
#endif
#include <asm-generic/pci-dma-compat.h>
#endif
arch/tile/Kconfig
View file @ 63e30271
......@@ -455,8 +455,6 @@ config TILE_PCI_IO
source "drivers/pci/Kconfig"
source "drivers/pci/pcie/Kconfig"
config TILE_USB
tristate "Tilera USB host adapter support"
default y
......@@ -467,8 +465,6 @@ config TILE_USB
Provides USB host adapter support for the built-in EHCI and OHCI
interfaces on TILE-Gx chips.
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "Executable file formats"
......
arch/tile/include/asm/pci.h
View file @ 63e30271
......@@ -226,7 +226,4 @@ static inline int pcibios_assign_all_busses(void)
/* Use any cpu for PCI. */
#define cpumask_of_pcibus(bus) cpu_online_mask
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
#endif /* _ASM_TILE_PCI_H */
arch/unicore32/include/asm/pci.h
View file @ 63e30271
......@@ -13,8 +13,6 @@
#define __UNICORE_PCI_H__
#ifdef __KERNEL__
#include <asm-generic/pci-dma-compat.h>
#include <asm-generic/pci-bridge.h>
#include <asm-generic/pci.h>
#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
......@@ -23,5 +21,4 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
#endif /* __KERNEL__ */
#endif
arch/unicore32/include/mach/hardware.h
View file @ 63e30271
......@@ -28,11 +28,6 @@
#define PCIBIOS_MIN_IO 0x4000 /* should lower than 64KB */
#define PCIBIOS_MIN_MEM io_v2p(PKUNITY_PCIMEM_BASE)
/*
* We override the standard dma-mask routines for bouncing.
*/
#define HAVE_ARCH_PCI_SET_DMA_MASK
#define pcibios_assign_all_busses() 1
#endif /* __MACH_PUV3_HARDWARE_H__ */
arch/x86/Kconfig
View file @ 63e30271
......@@ -2435,8 +2435,6 @@ config PCI_CNB20LE_QUIRK
You should say N unless you know you need this.
source "drivers/pci/pcie/Kconfig"
source "drivers/pci/Kconfig"
# x86_64 have no ISA slots, but can have ISA-style DMA.
......@@ -2592,8 +2590,6 @@ config AMD_NB
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
config RAPIDIO
tristate "RapidIO support"
depends on PCI
......
arch/x86/include/asm/pci.h
View file @ 63e30271
......@@ -20,6 +20,9 @@ struct pci_sysdata {
#ifdef CONFIG_X86_64
void *iommu; /* IOMMU private data */
#endif
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
void *fwnode; /* IRQ domain for MSI assignment */
#endif
};
extern int pci_routeirq;
......@@ -32,6 +35,7 @@ extern int noioapicreroute;
static inline int pci_domain_nr(struct pci_bus *bus)
{
struct pci_sysdata *sd = bus->sysdata;
return sd->domain;
}
......@@ -41,6 +45,17 @@ static inline int pci_proc_domain(struct pci_bus *bus)
}
#endif
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
{
struct pci_sysdata *sd = bus->sysdata;
return sd->fwnode;
}
#define pci_root_bus_fwnode _pci_root_bus_fwnode
#endif
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
......@@ -105,9 +120,6 @@ void native_restore_msi_irqs(struct pci_dev *dev);
#include <asm/pci_64.h>
#endif
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
/* generic pci stuff */
#include <asm-generic/pci.h>
......
arch/x86/pci/common.c
View file @ 63e30271
......@@ -12,7 +12,6 @@
#include <linux/dmi.h>
#include <linux/slab.h>
#include <asm-generic/pci-bridge.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
......
arch/x86/pci/fixup.c
View file @ 63e30271
......@@ -297,14 +297,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_r
*
* The standard boot ROM sequence for an x86 machine uses the BIOS
* to select an initial video card for boot display. This boot video
* card will have it's BIOS copied to C0000 in system RAM.
* card will have its BIOS copied to 0xC0000 in system RAM.
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
* See pci_map_rom() for use of this flag. Before marking the device
* with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
* by either arch cde or vga-arbitration, if so only apply the fixup to this
* already determined primary video card.
* by either arch code or vga-arbitration; if so only apply the fixup to this
* already-determined primary video card.
*/
static void pci_fixup_video(struct pci_dev *pdev)
......@@ -312,6 +312,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
struct resource *res;
/* Is VGA routed to us? */
bus = pdev->bus;
......@@ -336,8 +337,18 @@ static void pci_fixup_video(struct pci_dev *pdev)
if (!vga_default_device() || pdev == vga_default_device()) {
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
res = &pdev->resource[PCI_ROM_RESOURCE];
pci_disable_rom(pdev);
if (res->parent)
release_resource(res);
res->start = 0xC0000;
res->end = res->start + 0x20000 - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
IORESOURCE_PCI_FIXED;
dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
res);
}
}
}
......@@ -540,3 +551,10 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
static void pci_bdwep_bar(struct pci_dev *dev)
{
dev->non_compliant_bars = 1;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
arch/x86/pci/vmd.c
View file @ 63e30271
......@@ -503,6 +503,18 @@ static struct pci_ops vmd_ops = {
.write = vmd_pci_write,
};
static void vmd_attach_resources(struct vmd_dev *vmd)
{
vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
}
static void vmd_detach_resources(struct vmd_dev *vmd)
{
vmd->dev->resource[VMD_MEMBAR1].child = NULL;
vmd->dev->resource[VMD_MEMBAR2].child = NULL;
}
/*
* VMD domains start at 0x1000 to not clash with ACPI _SEG domains.
*/
......@@ -527,11 +539,28 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
res = &vmd->dev->resource[VMD_CFGBAR];
vmd->resources[0] = (struct resource) {
.name = "VMD CFGBAR",
.start = res->start,
.start = 0,
.end = (resource_size(res) >> 20) - 1,
.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
};
/*
* If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
* put 32-bit resources in the window.
*
* There's no hardware reason why a 64-bit window *couldn't*
* contain a 32-bit resource, but pbus_size_mem() computes the
* bridge window size assuming a 64-bit window will contain no
* 32-bit resources. __pci_assign_resource() enforces that
* artificial restriction to make sure everything will fit.
*
* The only way we could use a 64-bit non-prefechable MEMBAR is
* if its address is <4GB so that we can convert it to a 32-bit
* resource. To be visible to the host OS, all VMD endpoints must
* be initially configured by platform BIOS, which includes setting
* up these resources. We can assume the device is configured
* according to the platform needs.
*/
res = &vmd->dev->resource[VMD_MEMBAR1];
upper_bits = upper_32_bits(res->end);
flags = res->flags & ~IORESOURCE_SIZEALIGN;
......@@ -542,6 +571,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
.start = res->start,
.end = res->end,
.flags = flags,
.parent = res,
};
res = &vmd->dev->resource[VMD_MEMBAR2];
......@@ -554,6 +584,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
.start = res->start + 0x2000,
.end = res->end,
.flags = flags,
.parent = res,
};
sd->domain = vmd_find_free_domain();
......@@ -578,6 +609,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
return -ENODEV;
}
vmd_attach_resources(vmd);
vmd_setup_dma_ops(vmd);
dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
pci_rescan_bus(vmd->bus);
......@@ -674,6 +706,7 @@ static void vmd_remove(struct pci_dev *dev)
{
struct vmd_dev *vmd = pci_get_drvdata(dev);
vmd_detach_resources(vmd);
pci_set_drvdata(dev, NULL);
sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
pci_stop_root_bus(vmd->bus);
......
arch/xtensa/Kconfig
View file @ 63e30271
......@@ -413,8 +413,6 @@ config FORCE_MAX_ZONEORDER
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
config PLATFORM_WANT_DEFAULT_MEM
def_bool n
......
arch/xtensa/include/asm/pci.h
View file @ 63e30271
......@@ -55,9 +55,6 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
#endif /* __KERNEL__ */
/* Implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
/* Generic PCI */
#include <asm-generic/pci.h>
......
drivers/ata/pata_macio.c
View file @ 63e30271
......@@ -22,6 +22,7 @@
#include <linux/scatterlist.h>
#include <linux/of.h>
#include <linux/gfp.h>
#include <linux/pci.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
......@@ -30,7 +31,6 @@
#include <asm/macio.h>
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/mediabay.h>
......
drivers/char/agp/uninorth-agp.c
View file @ 63e30271
......@@ -10,7 +10,6 @@
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <asm/uninorth.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/pmac_feature.h>
#include "agp.h"
......
drivers/gpu/drm/bochs/bochs_drv.c
View file @ 63e30271
......@@ -182,8 +182,8 @@ static const struct pci_device_id bochs_pci_tbl[] = {
{
.vendor = 0x1234,
.device = 0x1111,
.subvendor = 0x1af4,
.subdevice = 0x1100,
.subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
.subdevice = PCI_SUBDEVICE_ID_QEMU,
.driver_data = BOCHS_QEMU_STDVGA,
},
{
......
drivers/gpu/drm/cirrus/cirrus_drv.c
View file @ 63e30271
......@@ -33,8 +33,9 @@ static struct drm_driver driver;
/* only bind to the cirrus chip in qemu */
static const struct pci_device_id pciidlist[] = {
{ PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, 0x1af4, 0x1100, 0,
0, 0 },
{ PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446,
PCI_SUBVENDOR_ID_REDHAT_QUMRANET, PCI_SUBDEVICE_ID_QEMU,
0, 0, 0 },
{ PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, PCI_VENDOR_ID_XEN,
0x0001, 0, 0, 0 },
{0,}
......
drivers/gpu/drm/radeon/radeon_combios.c
View file @ 63e30271
......@@ -34,7 +34,6 @@
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#endif /* CONFIG_PPC_PMAC */
/* from radeon_legacy_encoder.c */
......
drivers/ide/pdc202xx_new.c
View file @ 63e30271
......@@ -28,7 +28,6 @@
#ifdef CONFIG_PPC_PMAC
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#endif
#define DRV_NAME "pdc202xx_new"
......
drivers/ide/pmac.c
View file @ 63e30271
......@@ -40,7 +40,6 @@
#include <asm/io.h>
#include <asm/dbdma.h>
#include <asm/ide.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
......
drivers/macintosh/macio_asic.c
View file @ 63e30271
......@@ -31,7 +31,6 @@
#include <asm/macio.h>
#include <asm/pmac_feature.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#undef DEBUG
......
drivers/misc/cxl/pci.c
View file @ 63e30271
......@@ -19,7 +19,6 @@
#include <linux/delay.h>
#include <asm/opal.h>
#include <asm/msi_bitmap.h>
#include <asm/pci-bridge.h> /* for struct pci_controller */
#include <asm/pnv-pci.h>
#include <asm/io.h>
......
drivers/net/ethernet/sun/sungem.c
View file @ 63e30271
......@@ -51,7 +51,6 @@
#endif
#ifdef CONFIG_PPC_PMAC
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
......
drivers/net/ethernet/toshiba/spider_net.c
View file @ 63e30271
......@@ -48,7 +48,6 @@
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
#include <asm/pci-bridge.h>
#include <net/checksum.h>
#include "spider_net.h"
......
drivers/of/of_pci.c
View file @ 63e30271
......@@ -5,7 +5,6 @@
#include <linux/of_device.h>
#include <linux/of_pci.h>
#include <linux/slab.h>
#include <asm-generic/pci-bridge.h>
static inline int __of_pci_pci_compare(struct device_node *node,
unsigned int data)
......
drivers/parisc/Kconfig
View file @ 63e30271
......@@ -110,8 +110,6 @@ config IOMMU_HELPER
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "PA-RISC specific drivers"
......
drivers/pci/Kconfig
View file @ 63e30271
#
# PCI configuration
#
source "drivers/pci/pcie/Kconfig"
config PCI_BUS_ADDR_T_64BIT
def_bool y if (ARCH_DMA_ADDR_T_64BIT || 64BIT)
depends on PCI
......@@ -118,4 +121,11 @@ config PCI_LABEL
def_bool y if (DMI || ACPI)
select NLS
config PCI_HYPERV
tristate "Hyper-V PCI Frontend"
depends on PCI && X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64
help
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
source "drivers/pci/host/Kconfig"
drivers/pci/Makefile
View file @ 63e30271
......@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
# Some architectures use the generic PCI setup functions
#
obj-$(CONFIG_ALPHA) += setup-irq.o
obj-$(CONFIG_ARC) += setup-irq.o
obj-$(CONFIG_ARM) += setup-irq.o
obj-$(CONFIG_ARM64) += setup-irq.o
obj-$(CONFIG_UNICORE32) += setup-irq.o
......
drivers/pci/access.c
View file @ 63e30271
......@@ -174,38 +174,6 @@ struct pci_ops *pci_bus_set_ops(struct pci_bus *bus, struct pci_ops *ops)
}
EXPORT_SYMBOL(pci_bus_set_ops);
/**
* pci_read_vpd - Read one entry from Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
* @count: number of bytes to read
* @buf: pointer to where to store result
*
*/
ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
{
if (!dev->vpd || !dev->vpd->ops)
return -ENODEV;
return dev->vpd->ops->read(dev, pos, count, buf);
}
EXPORT_SYMBOL(pci_read_vpd);
/**
* pci_write_vpd - Write entry to Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
* @count: number of bytes to write
* @buf: buffer containing write data
*
*/
ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
{
if (!dev->vpd || !dev->vpd->ops)
return -ENODEV;
return dev->vpd->ops->write(dev, pos, count, buf);
}
EXPORT_SYMBOL(pci_write_vpd);
/*
* The following routines are to prevent the user from accessing PCI config
* space when it's unsafe to do so. Some devices require this during BIST and
......@@ -277,15 +245,91 @@ PCI_USER_WRITE_CONFIG(dword, u32)
/* VPD access through PCI 2.2+ VPD capability */
#define PCI_VPD_PCI22_SIZE (PCI_VPD_ADDR_MASK + 1)
/**
* pci_read_vpd - Read one entry from Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
* @count: number of bytes to read
* @buf: pointer to where to store result
*/
ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
{
if (!dev->vpd || !dev->vpd->ops)
return -ENODEV;
return dev->vpd->ops->read(dev, pos, count, buf);
}
EXPORT_SYMBOL(pci_read_vpd);
struct pci_vpd_pci22 {
struct pci_vpd base;
struct mutex lock;
u16 flag;
bool busy;
u8 cap;
};
/**
* pci_write_vpd - Write entry to Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
* @count: number of bytes to write
* @buf: buffer containing write data
*/
ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
{
if (!dev->vpd || !dev->vpd->ops)
return -ENODEV;
return dev->vpd->ops->write(dev, pos, count, buf);
}
EXPORT_SYMBOL(pci_write_vpd);
#define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1)
/**
* pci_vpd_size - determine actual size of Vital Product Data
* @dev: pci device struct
* @old_size: current assumed size, also maximum allowed size
*/
static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size)
{
size_t off = 0;
unsigned char header[1+2]; /* 1 byte tag, 2 bytes length */
while (off < old_size &&
pci_read_vpd(dev, off, 1, header) == 1) {
unsigned char tag;
if (header[0] & PCI_VPD_LRDT) {
/* Large Resource Data Type Tag */
tag = pci_vpd_lrdt_tag(header);
/* Only read length from known tag items */
if ((tag == PCI_VPD_LTIN_ID_STRING) ||
(tag == PCI_VPD_LTIN_RO_DATA) ||
(tag == PCI_VPD_LTIN_RW_DATA)) {
if (pci_read_vpd(dev, off+1, 2,
&header[1]) != 2) {
dev_warn(&dev->dev,
"invalid large VPD tag %02x size at offset %zu",
tag, off + 1);
return 0;
}
off += PCI_VPD_LRDT_TAG_SIZE +
pci_vpd_lrdt_size(header);
}
} else {
/* Short Resource Data Type Tag */
off += PCI_VPD_SRDT_TAG_SIZE +
pci_vpd_srdt_size(header);
tag = pci_vpd_srdt_tag(header);
}
if (tag == PCI_VPD_STIN_END) /* End tag descriptor */
return off;
if ((tag != PCI_VPD_LTIN_ID_STRING) &&
(tag != PCI_VPD_LTIN_RO_DATA) &&
(tag != PCI_VPD_LTIN_RW_DATA)) {
dev_warn(&dev->dev,
"invalid %s VPD tag %02x at offset %zu",
(header[0] & PCI_VPD_LRDT) ? "large" : "short",
tag, off);
return 0;
}
}
return 0;
}
/*
* Wait for last operation to complete.
......@@ -295,55 +339,71 @@ struct pci_vpd_pci22 {
*
* Returns 0 on success, negative values indicate error.
*/
static int pci_vpd_pci22_wait(struct pci_dev *dev)
static int pci_vpd_wait(struct pci_dev *dev)
{
struct pci_vpd_pci22 *vpd =
container_of(dev->vpd, struct pci_vpd_pci22, base);
unsigned long timeout = jiffies + HZ/20 + 2;
struct pci_vpd *vpd = dev->vpd;
unsigned long timeout = jiffies + msecs_to_jiffies(50);
unsigned long max_sleep = 16;
u16 status;
int ret;
if (!vpd->busy)
return 0;
for (;;) {
while (time_before(jiffies, timeout)) {
ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
&status);
if (ret < 0)
return ret;
if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
vpd->busy = false;
vpd->busy = 0;
return 0;
}
if (time_after(jiffies, timeout)) {
dev_printk(KERN_DEBUG, &dev->dev, "vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
return -ETIMEDOUT;
}
if (fatal_signal_pending(current))
return -EINTR;
if (!cond_resched())
udelay(10);
usleep_range(10, max_sleep);
if (max_sleep < 1024)
max_sleep *= 2;
}
dev_warn(&dev->dev, "VPD access failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update\n");
return -ETIMEDOUT;
}
static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
void *arg)
static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
void *arg)
{
struct pci_vpd_pci22 *vpd =
container_of(dev->vpd, struct pci_vpd_pci22, base);
struct pci_vpd *vpd = dev->vpd;
int ret;
loff_t end = pos + count;
u8 *buf = arg;
if (pos < 0 || pos > vpd->base.len || end > vpd->base.len)
if (pos < 0)
return -EINVAL;
if (!vpd->valid) {
vpd->valid = 1;
vpd->len = pci_vpd_size(dev, vpd->len);
}
if (vpd->len == 0)
return -EIO;
if (pos > vpd->len)
return 0;
if (end > vpd->len) {
end = vpd->len;
count = end - pos;
}
if (mutex_lock_killable(&vpd->lock))
return -EINTR;
ret = pci_vpd_pci22_wait(dev);
ret = pci_vpd_wait(dev);
if (ret < 0)
goto out;
......@@ -355,9 +415,9 @@ static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
pos & ~3);
if (ret < 0)
break;
vpd->busy = true;
vpd->busy = 1;
vpd->flag = PCI_VPD_ADDR_F;
ret = pci_vpd_pci22_wait(dev);
ret = pci_vpd_wait(dev);
if (ret < 0)
break;
......@@ -380,22 +440,32 @@ static ssize_t pci_vpd_pci22_read(struct pci_dev *dev, loff_t pos, size_t count,
return ret ? ret : count;
}
static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count,
const void *arg)
static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
const void *arg)
{
struct pci_vpd_pci22 *vpd =
container_of(dev->vpd, struct pci_vpd_pci22, base);
struct pci_vpd *vpd = dev->vpd;
const u8 *buf = arg;
loff_t end = pos + count;
int ret = 0;
if (pos < 0 || (pos & 3) || (count & 3) || end > vpd->base.len)
if (pos < 0 || (pos & 3) || (count & 3))
return -EINVAL;
if (!vpd->valid) {
vpd->valid = 1;
vpd->len = pci_vpd_size(dev, vpd->len);
}
if (vpd->len == 0)
return -EIO;
if (end > vpd->len)
return -EINVAL;
if (mutex_lock_killable(&vpd->lock))
return -EINTR;
ret = pci_vpd_pci22_wait(dev);
ret = pci_vpd_wait(dev);
if (ret < 0)
goto out;
......@@ -415,9 +485,9 @@ static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count
if (ret < 0)
break;
vpd->busy = true;
vpd->busy = 1;
vpd->flag = 0;
ret = pci_vpd_pci22_wait(dev);
ret = pci_vpd_wait(dev);
if (ret < 0)
break;
......@@ -428,15 +498,9 @@ static ssize_t pci_vpd_pci22_write(struct pci_dev *dev, loff_t pos, size_t count
return ret ? ret : count;
}
static void pci_vpd_pci22_release(struct pci_dev *dev)
{
kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
}
static const struct pci_vpd_ops pci_vpd_pci22_ops = {
.read = pci_vpd_pci22_read,
.write = pci_vpd_pci22_write,
.release = pci_vpd_pci22_release,
static const struct pci_vpd_ops pci_vpd_ops = {
.read = pci_vpd_read,
.write = pci_vpd_write,
};
static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
......@@ -472,12 +536,11 @@ static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count,
static const struct pci_vpd_ops pci_vpd_f0_ops = {
.read = pci_vpd_f0_read,
.write = pci_vpd_f0_write,
.release = pci_vpd_pci22_release,
};
int pci_vpd_pci22_init(struct pci_dev *dev)
int pci_vpd_init(struct pci_dev *dev)
{
struct pci_vpd_pci22 *vpd;
struct pci_vpd *vpd;
u8 cap;
cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
......@@ -488,18 +551,24 @@ int pci_vpd_pci22_init(struct pci_dev *dev)
if (!vpd)
return -ENOMEM;
vpd->base.len = PCI_VPD_PCI22_SIZE;
vpd->len = PCI_VPD_MAX_SIZE;
if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0)
vpd->base.ops = &pci_vpd_f0_ops;
vpd->ops = &pci_vpd_f0_ops;
else
vpd->base.ops = &pci_vpd_pci22_ops;
vpd->ops = &pci_vpd_ops;
mutex_init(&vpd->lock);
vpd->cap = cap;
vpd->busy = false;
dev->vpd = &vpd->base;
vpd->busy = 0;
vpd->valid = 0;
dev->vpd = vpd;
return 0;
}
void pci_vpd_release(struct pci_dev *dev)
{
kfree(dev->vpd);
}
/**
* pci_cfg_access_lock - Lock PCI config reads/writes
* @dev: pci device struct
......
drivers/pci/bus.c
View file @ 63e30271
......@@ -291,7 +291,12 @@ void pci_bus_add_device(struct pci_dev *dev)
dev->match_driver = true;
retval = device_attach(&dev->dev);
WARN_ON(retval < 0);
if (retval < 0) {
dev_warn(&dev->dev, "device attach failed (%d)\n", retval);
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
return;
}
dev->is_added = 1;
}
......
drivers/pci/host/Kconfig
View file @ 63e30271
......@@ -17,6 +17,28 @@ config PCI_MVEBU
depends on ARM
depends on OF
config PCIE_XILINX_NWL
bool "NWL PCIe Core"
depends on ARCH_ZYNQMP
select PCI_MSI_IRQ_DOMAIN if PCI_MSI
help
Say 'Y' here if you want kernel support for Xilinx
NWL PCIe controller. The controller can act as Root Port
or End Point. The current option selection will only
support root port enabling.
config PCIE_DW_PLAT
bool "Platform bus based DesignWare PCIe Controller"
select PCIE_DW
---help---
This selects the DesignWare PCIe controller support. Select this if
you have a PCIe controller on Platform bus.
If you have a controller with this interface, say Y or M here.
If unsure, say N.
config PCIE_DW
bool
......@@ -42,7 +64,7 @@ config PCI_TEGRA
config PCI_RCAR_GEN2
bool "Renesas R-Car Gen2 Internal PCI controller"
depends on ARM
depends on ARCH_SHMOBILE || COMPILE_TEST
depends on ARCH_RENESAS || COMPILE_TEST
help
Say Y here if you want internal PCI support on R-Car Gen2 SoC.
There are 3 internal PCI controllers available with a single
......@@ -50,13 +72,17 @@ config PCI_RCAR_GEN2
config PCI_RCAR_GEN2_PCIE
bool "Renesas R-Car PCIe controller"
depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
help
Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
config PCI_HOST_COMMON
bool
config PCI_HOST_GENERIC
bool "Generic PCI host controller"
depends on (ARM || ARM64) && OF
select PCI_HOST_COMMON
help
Say Y here if you want to support a simple generic PCI host
controller, such as the one emulated by kvmtool.
......@@ -82,7 +108,7 @@ config PCI_KEYSTONE
config PCIE_XILINX
bool "Xilinx AXI PCIe host bridge support"
depends on ARCH_ZYNQ
depends on ARCH_ZYNQ || MICROBLAZE
help
Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
Host Bridge driver.
......@@ -192,4 +218,18 @@ config PCIE_QCOM
PCIe controller uses the Designware core plus Qualcomm-specific
hardware wrappers.
config PCI_HOST_THUNDER_PEM
bool "Cavium Thunder PCIe controller to off-chip devices"
depends on OF && ARM64
select PCI_HOST_COMMON
help
Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
config PCI_HOST_THUNDER_ECAM
bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
depends on OF && ARM64
select PCI_HOST_COMMON
help
Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
endmenu
drivers/pci/host/Makefile
View file @ 63e30271
obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_HYPERV) += pci-hyperv.o
obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
......@@ -22,3 +26,5 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
drivers/pci/host/pci-dra7xx.c
View file @ 63e30271
......@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
......@@ -108,7 +107,6 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp)
{
struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
u32 reg;
unsigned int retries;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "link is already up\n");
......@@ -119,14 +117,7 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp)
reg |= LTSSM_EN;
dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
for (retries = 0; retries < 1000; retries++) {
if (dw_pcie_link_up(pp))
return 0;
usleep_range(10, 20);
}
dev_err(pp->dev, "link is not up\n");
return -EINVAL;
return dw_pcie_wait_for_link(pp);
}
static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
......
drivers/pci/host/pci-exynos.c
View file @ 63e30271
......@@ -318,7 +318,6 @@ static int exynos_pcie_establish_link(struct pcie_port *pp)
{
struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
u32 val;
unsigned int retries;
if (dw_pcie_link_up(pp)) {
dev_err(pp->dev, "Link already up\n");
......@@ -357,13 +356,8 @@ static int exynos_pcie_establish_link(struct pcie_port *pp)
PCIE_APP_LTSSM_ENABLE);
/* check if the link is up or not */
for (retries = 0; retries < 10; retries++) {
if (dw_pcie_link_up(pp)) {
dev_info(pp->dev, "Link up\n");
return 0;
}
mdelay(100);
}
if (!dw_pcie_wait_for_link(pp))
return 0;
while (exynos_phy_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED) == 0) {
val = exynos_blk_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED);
......@@ -372,8 +366,7 @@ static int exynos_pcie_establish_link(struct pcie_port *pp)
/* power off phy */
exynos_pcie_power_off_phy(pp);
dev_err(pp->dev, "PCIe Link Fail\n");
return -EINVAL;
return -ETIMEDOUT;
}
static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp)
......
drivers/pci/host/pci-host-common.c 0 → 100644
View file @ 63e30271
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Copyright (C) 2014 ARM Limited
*
* Author: Will Deacon <will.deacon@arm.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/platform_device.h>
#include "pci-host-common.h"
static void gen_pci_release_of_pci_ranges(struct gen_pci *pci)
{
pci_free_resource_list(&pci->resources);
}
static int gen_pci_parse_request_of_pci_ranges(struct gen_pci *pci)
{
int err, res_valid = 0;
struct device *dev = pci->host.dev.parent;
struct device_node *np = dev->of_node;
resource_size_t iobase;
struct resource_entry *win;
err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
&iobase);
if (err)
return err;
resource_list_for_each_entry(win, &pci->resources) {
struct resource *parent, *res = win->res;
switch (resource_type(res)) {
case IORESOURCE_IO:
parent = &ioport_resource;
err = pci_remap_iospace(res, iobase);
if (err) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
continue;
}
break;
case IORESOURCE_MEM:
parent = &iomem_resource;
res_valid |= !(res->flags & IORESOURCE_PREFETCH);
break;
case IORESOURCE_BUS:
pci->cfg.bus_range = res;
default:
continue;
}
err = devm_request_resource(dev, parent, res);
if (err)
goto out_release_res;
}
if (!res_valid) {
dev_err(dev, "non-prefetchable memory resource required\n");
err = -EINVAL;
goto out_release_res;
}
return 0;
out_release_res:
gen_pci_release_of_pci_ranges(pci);
return err;
}
static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
{
int err;
u8 bus_max;
resource_size_t busn;
struct resource *bus_range;
struct device *dev = pci->host.dev.parent;
struct device_node *np = dev->of_node;
u32 sz = 1 << pci->cfg.ops->bus_shift;
err = of_address_to_resource(np, 0, &pci->cfg.res);
if (err) {
dev_err(dev, "missing \"reg\" property\n");
return err;
}
/* Limit the bus-range to fit within reg */
bus_max = pci->cfg.bus_range->start +
(resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1;
pci->cfg.bus_range->end = min_t(resource_size_t,
pci->cfg.bus_range->end, bus_max);
pci->cfg.win = devm_kcalloc(dev, resource_size(pci->cfg.bus_range),
sizeof(*pci->cfg.win), GFP_KERNEL);
if (!pci->cfg.win)
return -ENOMEM;
/* Map our Configuration Space windows */
if (!devm_request_mem_region(dev, pci->cfg.res.start,
resource_size(&pci->cfg.res),
"Configuration Space"))
return -ENOMEM;
bus_range = pci->cfg.bus_range;
for (busn = bus_range->start; busn <= bus_range->end; ++busn) {
u32 idx = busn - bus_range->start;
pci->cfg.win[idx] = devm_ioremap(dev,
pci->cfg.res.start + idx * sz,
sz);
if (!pci->cfg.win[idx])
return -ENOMEM;
}
return 0;
}
int pci_host_common_probe(struct platform_device *pdev,
struct gen_pci *pci)
{
int err;
const char *type;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct pci_bus *bus, *child;
type = of_get_property(np, "device_type", NULL);
if (!type || strcmp(type, "pci")) {
dev_err(dev, "invalid \"device_type\" %s\n", type);
return -EINVAL;
}
of_pci_check_probe_only();
pci->host.dev.parent = dev;
INIT_LIST_HEAD(&pci->host.windows);
INIT_LIST_HEAD(&pci->resources);
/* Parse our PCI ranges and request their resources */
err = gen_pci_parse_request_of_pci_ranges(pci);
if (err)
return err;
/* Parse and map our Configuration Space windows */
err = gen_pci_parse_map_cfg_windows(pci);
if (err) {
gen_pci_release_of_pci_ranges(pci);
return err;
}
/* Do not reassign resources if probe only */
if (!pci_has_flag(PCI_PROBE_ONLY))
pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
&pci->cfg.ops->ops, pci, &pci->resources);
if (!bus) {
dev_err(dev, "Scanning rootbus failed");
return -ENODEV;
}
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
if (!pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
pci_bus_add_devices(bus);
return 0;
}
MODULE_DESCRIPTION("Generic PCI host driver common code");
MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
MODULE_LICENSE("GPL v2");
drivers/pci/host/pci-host-common.h 0 → 100644
View file @ 63e30271
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Copyright (C) 2014 ARM Limited
*
* Author: Will Deacon <will.deacon@arm.com>
*/
#ifndef _PCI_HOST_COMMON_H
#define _PCI_HOST_COMMON_H
#include <linux/kernel.h>
#include <linux/platform_device.h>
struct gen_pci_cfg_bus_ops {
u32 bus_shift;
struct pci_ops ops;
};
struct gen_pci_cfg_windows {
struct resource res;
struct resource *bus_range;
void __iomem **win;
struct gen_pci_cfg_bus_ops *ops;
};
struct gen_pci {
struct pci_host_bridge host;
struct gen_pci_cfg_windows cfg;
struct list_head resources;
};
int pci_host_common_probe(struct platform_device *pdev,
struct gen_pci *pci);
#endif /* _PCI_HOST_COMMON_H */
drivers/pci/host/pci-host-generic.c
View file @ 63e30271
......@@ -25,24 +25,7 @@
#include <linux/of_pci.h>
#include <linux/platform_device.h>
struct gen_pci_cfg_bus_ops {
u32 bus_shift;
struct pci_ops ops;
};
struct gen_pci_cfg_windows {
struct resource res;
struct resource *bus_range;
void __iomem **win;
struct gen_pci_cfg_bus_ops *ops;
};
struct gen_pci {
struct pci_host_bridge host;
struct gen_pci_cfg_windows cfg;
struct list_head resources;
};
#include "pci-host-common.h"
static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus,
unsigned int devfn,
......@@ -93,175 +76,19 @@ static const struct of_device_id gen_pci_of_match[] = {
};
MODULE_DEVICE_TABLE(of, gen_pci_of_match);
static void gen_pci_release_of_pci_ranges(struct gen_pci *pci)
{
pci_free_resource_list(&pci->resources);
}
static int gen_pci_parse_request_of_pci_ranges(struct gen_pci *pci)
{
int err, res_valid = 0;
struct device *dev = pci->host.dev.parent;
struct device_node *np = dev->of_node;
resource_size_t iobase;
struct resource_entry *win;
err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
&iobase);
if (err)
return err;
resource_list_for_each_entry(win, &pci->resources) {
struct resource *parent, *res = win->res;
switch (resource_type(res)) {
case IORESOURCE_IO:
parent = &ioport_resource;
err = pci_remap_iospace(res, iobase);
if (err) {
dev_warn(dev, "error %d: failed to map resource %pR\n",
err, res);
continue;
}
break;
case IORESOURCE_MEM:
parent = &iomem_resource;
res_valid |= !(res->flags & IORESOURCE_PREFETCH);
break;
case IORESOURCE_BUS:
pci->cfg.bus_range = res;
default:
continue;
}
err = devm_request_resource(dev, parent, res);
if (err)
goto out_release_res;
}
if (!res_valid) {
dev_err(dev, "non-prefetchable memory resource required\n");
err = -EINVAL;
goto out_release_res;
}
return 0;
out_release_res:
gen_pci_release_of_pci_ranges(pci);
return err;
}
static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
{
int err;
u8 bus_max;
resource_size_t busn;
struct resource *bus_range;
struct device *dev = pci->host.dev.parent;
struct device_node *np = dev->of_node;
u32 sz = 1 << pci->cfg.ops->bus_shift;
err = of_address_to_resource(np, 0, &pci->cfg.res);
if (err) {
dev_err(dev, "missing \"reg\" property\n");
return err;
}
/* Limit the bus-range to fit within reg */
bus_max = pci->cfg.bus_range->start +
(resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1;
pci->cfg.bus_range->end = min_t(resource_size_t,
pci->cfg.bus_range->end, bus_max);
pci->cfg.win = devm_kcalloc(dev, resource_size(pci->cfg.bus_range),
sizeof(*pci->cfg.win), GFP_KERNEL);
if (!pci->cfg.win)
return -ENOMEM;
/* Map our Configuration Space windows */
if (!devm_request_mem_region(dev, pci->cfg.res.start,
resource_size(&pci->cfg.res),
"Configuration Space"))
return -ENOMEM;
bus_range = pci->cfg.bus_range;
for (busn = bus_range->start; busn <= bus_range->end; ++busn) {
u32 idx = busn - bus_range->start;
pci->cfg.win[idx] = devm_ioremap(dev,
pci->cfg.res.start + idx * sz,
sz);
if (!pci->cfg.win[idx])
return -ENOMEM;
}
return 0;
}
static int gen_pci_probe(struct platform_device *pdev)
{
int err;
const char *type;
const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
const struct of_device_id *of_id;
struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
struct pci_bus *bus, *child;
if (!pci)
return -ENOMEM;
type = of_get_property(np, "device_type", NULL);
if (!type || strcmp(type, "pci")) {
dev_err(dev, "invalid \"device_type\" %s\n", type);
return -EINVAL;
}
of_pci_check_probe_only();
of_id = of_match_node(gen_pci_of_match, np);
of_id = of_match_node(gen_pci_of_match, dev->of_node);
pci->cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
pci->host.dev.parent = dev;
INIT_LIST_HEAD(&pci->host.windows);
INIT_LIST_HEAD(&pci->resources);
/* Parse our PCI ranges and request their resources */
err = gen_pci_parse_request_of_pci_ranges(pci);
if (err)
return err;
/* Parse and map our Configuration Space windows */
err = gen_pci_parse_map_cfg_windows(pci);
if (err) {
gen_pci_release_of_pci_ranges(pci);
return err;
}
/* Do not reassign resources if probe only */
if (!pci_has_flag(PCI_PROBE_ONLY))
pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
&pci->cfg.ops->ops, pci, &pci->resources);
if (!bus) {
dev_err(dev, "Scanning rootbus failed");
return -ENODEV;
}
pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
if (!pci_has_flag(PCI_PROBE_ONLY)) {
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
list_for_each_entry(child, &bus->children, node)
pcie_bus_configure_settings(child);
}
pci_bus_add_devices(bus);
return 0;
return pci_host_common_probe(pdev, pci);
}
static struct platform_driver gen_pci_driver = {
......
drivers/pci/host/pci-hyperv.c 0 → 100644
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pci-imx6.c
View file @ 63e30271
......@@ -39,6 +39,11 @@ struct imx6_pcie {
struct pcie_port pp;
struct regmap *iomuxc_gpr;
void __iomem *mem_base;
u32 tx_deemph_gen1;
u32 tx_deemph_gen2_3p5db;
u32 tx_deemph_gen2_6db;
u32 tx_swing_full;
u32 tx_swing_low;
};
/* PCIe Root Complex registers (memory-mapped) */
......@@ -202,6 +207,23 @@ static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
return 0;
}
static void imx6_pcie_reset_phy(struct pcie_port *pp)
{
u32 tmp;
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
usleep_range(2000, 3000);
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
}
/* Added for PCI abort handling */
static int imx6q_pcie_abort_handler(unsigned long addr,
unsigned int fsr, struct pt_regs *regs)
......@@ -317,32 +339,32 @@ static void imx6_pcie_init_phy(struct pcie_port *pp)
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
IMX6Q_GPR8_TX_DEEMPH_GEN1,
imx6_pcie->tx_deemph_gen1 << 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
imx6_pcie->tx_deemph_gen2_3p5db << 6);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
imx6_pcie->tx_deemph_gen2_6db << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
IMX6Q_GPR8_TX_SWING_FULL,
imx6_pcie->tx_swing_full << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
IMX6Q_GPR8_TX_SWING_LOW,
imx6_pcie->tx_swing_low << 25);
}
static int imx6_pcie_wait_for_link(struct pcie_port *pp)
{
unsigned int retries;
for (retries = 0; retries < 200; retries++) {
if (dw_pcie_link_up(pp))
return 0;
usleep_range(100, 1000);
}
/* check if the link is up or not */
if (!dw_pcie_wait_for_link(pp))
return 0;
dev_err(pp->dev, "phy link never came up\n");
dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
return -EINVAL;
return -ETIMEDOUT;
}
static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp)
......@@ -390,8 +412,10 @@ static int imx6_pcie_establish_link(struct pcie_port *pp)
IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
ret = imx6_pcie_wait_for_link(pp);
if (ret)
return ret;
if (ret) {
dev_info(pp->dev, "Link never came up\n");
goto err_reset_phy;
}
/* Allow Gen2 mode after the link is up. */
tmp = readl(pp->dbi_base + PCIE_RC_LCR);
......@@ -410,19 +434,28 @@ static int imx6_pcie_establish_link(struct pcie_port *pp)
ret = imx6_pcie_wait_for_speed_change(pp);
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
return ret;
goto err_reset_phy;
}
/* Make sure link training is finished as well! */
ret = imx6_pcie_wait_for_link(pp);
if (ret) {
dev_err(pp->dev, "Failed to bring link up!\n");
return ret;
goto err_reset_phy;
}
tmp = readl(pp->dbi_base + PCIE_RC_LCSR);
dev_dbg(pp->dev, "Link up, Gen=%i\n", (tmp >> 16) & 0xf);
return 0;
err_reset_phy:
dev_dbg(pp->dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
imx6_pcie_reset_phy(pp);
return ret;
}
static void imx6_pcie_host_init(struct pcie_port *pp)
......@@ -441,81 +474,10 @@ static void imx6_pcie_host_init(struct pcie_port *pp)
dw_pcie_msi_init(pp);
}
static void imx6_pcie_reset_phy(struct pcie_port *pp)
{
u32 tmp;
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
usleep_range(2000, 3000);
pcie_phy_read(pp->dbi_base, PHY_RX_OVRD_IN_LO, &tmp);
tmp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN |
PHY_RX_OVRD_IN_LO_RX_PLL_EN);
pcie_phy_write(pp->dbi_base, PHY_RX_OVRD_IN_LO, tmp);
}
static int imx6_pcie_link_up(struct pcie_port *pp)
{
u32 rc, debug_r0, rx_valid;
int count = 5;
/*
* Test if the PHY reports that the link is up and also that the LTSSM
* training finished. There are three possible states of the link when
* this code is called:
* 1) The link is DOWN (unlikely)
* The link didn't come up yet for some reason. This usually means
* we have a real problem somewhere. Reset the PHY and exit. This
* state calls for inspection of the DEBUG registers.
* 2) The link is UP, but still in LTSSM training
* Wait for the training to finish, which should take a very short
* time. If the training does not finish, we have a problem and we
* need to inspect the DEBUG registers. If the training does finish,
* the link is up and operating correctly.
* 3) The link is UP and no longer in LTSSM training
* The link is up and operating correctly.
*/
while (1) {
rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP))
break;
if (!(rc & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING))
return 1;
if (!count--)
break;
dev_dbg(pp->dev, "Link is up, but still in training\n");
/*
* Wait a little bit, then re-check if the link finished
* the training.
*/
usleep_range(1000, 2000);
}
/*
* From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
* Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
* If (MAC/LTSSM.state == Recovery.RcvrLock)
* && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
* to gen2 is stuck
*/
pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
debug_r0 = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0);
if (rx_valid & PCIE_PHY_RX_ASIC_OUT_VALID)
return 0;
if ((debug_r0 & 0x3f) != 0x0d)
return 0;
dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
dev_dbg(pp->dev, "debug_r0=%08x debug_r1=%08x\n", debug_r0, rc);
imx6_pcie_reset_phy(pp);
return 0;
return readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) &
PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
}
static struct pcie_host_ops imx6_pcie_host_ops = {
......@@ -562,6 +524,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
struct imx6_pcie *imx6_pcie;
struct pcie_port *pp;
struct resource *dbi_base;
struct device_node *node = pdev->dev.of_node;
int ret;
imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
......@@ -614,6 +577,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
return PTR_ERR(imx6_pcie->iomuxc_gpr);
}
/* Grab PCIe PHY Tx Settings */
if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
&imx6_pcie->tx_deemph_gen1))
imx6_pcie->tx_deemph_gen1 = 0;
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
&imx6_pcie->tx_deemph_gen2_3p5db))
imx6_pcie->tx_deemph_gen2_3p5db = 0;
if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
&imx6_pcie->tx_deemph_gen2_6db))
imx6_pcie->tx_deemph_gen2_6db = 20;
if (of_property_read_u32(node, "fsl,tx-swing-full",
&imx6_pcie->tx_swing_full))
imx6_pcie->tx_swing_full = 127;
if (of_property_read_u32(node, "fsl,tx-swing-low",
&imx6_pcie->tx_swing_low))
imx6_pcie->tx_swing_low = 127;
ret = imx6_add_pcie_port(pp, pdev);
if (ret < 0)
return ret;
......
drivers/pci/host/pci-keystone.c
View file @ 63e30271
......@@ -97,17 +97,15 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
return 0;
}
ks_dw_pcie_initiate_link_train(ks_pcie);
/* check if the link is up or not */
for (retries = 0; retries < 200; retries++) {
if (dw_pcie_link_up(pp))
return 0;
usleep_range(100, 1000);
for (retries = 0; retries < 5; retries++) {
ks_dw_pcie_initiate_link_train(ks_pcie);
if (!dw_pcie_wait_for_link(pp))
return 0;
}
dev_err(pp->dev, "phy link never came up\n");
return -EINVAL;
return -ETIMEDOUT;
}
static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
......@@ -359,6 +357,9 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
/* initialize SerDes Phy if present */
phy = devm_phy_get(dev, "pcie-phy");
if (PTR_ERR_OR_ZERO(phy) == -EPROBE_DEFER)
return PTR_ERR(phy);
if (!IS_ERR_OR_NULL(phy)) {
ret = phy_init(phy);
if (ret < 0)
......
drivers/pci/host/pci-layerscape.c
View file @ 63e30271
......@@ -208,6 +208,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
{ },
};
MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
......
drivers/pci/host/pci-tegra.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pci-thunder-ecam.c 0 → 100644
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pci-thunder-pem.c 0 → 100644
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-altera.c
View file @ 63e30271
......@@ -40,6 +40,7 @@
#define P2A_INT_ENABLE 0x3070
#define P2A_INT_ENA_ALL 0xf
#define RP_LTSSM 0x3c64
#define RP_LTSSM_MASK 0x1f
#define LTSSM_L0 0xf
/* TLP configuration type 0 and 1 */
......@@ -140,7 +141,7 @@ static void tlp_write_tx(struct altera_pcie *pcie,
static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
{
return !!(cra_readl(pcie, RP_LTSSM) & LTSSM_L0);
return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
}
static bool altera_pcie_valid_config(struct altera_pcie *pcie,
......
drivers/pci/host/pcie-designware-plat.c 0 → 100644
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-designware.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-designware.h
View file @ 63e30271
......@@ -22,6 +22,11 @@
#define MAX_MSI_IRQS 32
#define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32)
/* Parameters for the waiting for link up routine */
#define LINK_WAIT_MAX_RETRIES 10
#define LINK_WAIT_USLEEP_MIN 90000
#define LINK_WAIT_USLEEP_MAX 100000
struct pcie_port {
struct device *dev;
u8 root_bus_nr;
......@@ -76,6 +81,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val);
int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val);
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
int dw_pcie_wait_for_link(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
......
drivers/pci/host/pcie-qcom.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-rcar.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-spear13xx.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-xilinx-nwl.c 0 → 100644
View file @ 63e30271
This diff is collapsed.
drivers/pci/host/pcie-xilinx.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/iov.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/pci-label.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/pci-sysfs.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/pci.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/pci.h
View file @ 63e30271
This diff is collapsed.
drivers/pci/pcie/Kconfig
View file @ 63e30271
This diff is collapsed.
drivers/pci/pcie/aer/aer_inject.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/pcie/pme.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/probe.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/quirks.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/remove.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/rom.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/setup-bus.c
View file @ 63e30271
This diff is collapsed.
drivers/pci/setup-res.c
View file @ 63e30271
This diff is collapsed.
drivers/scsi/mac53c94.c
View file @ 63e30271
This diff is collapsed.
drivers/scsi/mesh.c
View file @ 63e30271
This diff is collapsed.
drivers/usb/core/hcd-pci.c
View file @ 63e30271
This diff is collapsed.
drivers/usb/gadget/udc/amd5536udc.c
View file @ 63e30271
This diff is collapsed.
drivers/usb/gadget/udc/goku_udc.c
View file @ 63e30271
This diff is collapsed.
drivers/usb/gadget/udc/net2280.c
View file @ 63e30271
This diff is collapsed.
drivers/usb/gadget/udc/pch_udc.c
View file @ 63e30271
This diff is collapsed.
drivers/video/fbdev/aty/aty128fb.c
View file @ 63e30271
This diff is collapsed.
drivers/video/fbdev/aty/radeon_base.c
View file @ 63e30271
This diff is collapsed.
drivers/video/fbdev/imsttfb.c
View file @ 63e30271
This diff is collapsed.
drivers/video/fbdev/matrox/matroxfb_base.h
View file @ 63e30271
This diff is collapsed.
drivers/video/fbdev/offb.c
View file @ 63e30271
This diff is collapsed.
drivers/virtio/virtio_pci_common.c
View file @ 63e30271
This diff is collapsed.
include/asm-generic/pci-bridge.h deleted 100644 → 0
View file @ 277edbab
This diff is collapsed.
include/linux/ioport.h
View file @ 63e30271
This diff is collapsed.
include/linux/pci.h
View file @ 63e30271
This diff is collapsed.
include/linux/pci_ids.h
View file @ 63e30271
This diff is collapsed.
sound/pci/intel8x0.c
View file @ 63e30271
This diff is collapsed.
sound/ppc/pmac.c
View file @ 63e30271
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7