ARM: dts: vf610-twr: Add ADC support

vf610 has two ADC controllers, and vf610-twr board ADC0_SE5 pin connect
to sliding rheostat for ADC test, other ADC pins connect to connectors for
future use.

Add support for ADC0_SE5.

CC: Jonathan Cameron <jic23@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
CC: Peter Meerwald <pmeerw@pmeerw.net>
CC: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/vf610-twr.dts

@@ -47,6 +47,14 @@ reg_3p3v: regulator@0 {
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_vcc_3v3_mcu: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_3v3_mcu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
 	};
 
 	sound {
@@ -79,6 +87,13 @@ simple-audio-card,codec {
 	};
 };
 
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
 &dspi0 {
 	bus-num = <0>;
 	pinctrl-names = "default";
@@ -128,6 +143,12 @@ codec: sgtl5000@0a {
 
 &iomuxc {
 	vf610-twr {
+		pinctrl_adc0_ad5: adc0ad5grp {
+			fsl,pins = <
+				VF610_PAD_PTC30__ADC0_SE5		0xa1
+			>;
+		};
+
 		pinctrl_dspi0: dspi0grp {
 			fsl,pins = <
 				VF610_PAD_PTB19__DSPI0_CS0		0x1182

arch/arm/boot/dts/vf610.dtsi

@@ -183,6 +183,15 @@ pit: pit@40037000 {
 				clock-names = "pit";
 			};
 
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				interrupts = <0 53 0x04>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
 			wdog@4003e000 {
 				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 				reg = <0x4003e000 0x1000>;
@@ -326,6 +335,15 @@ uart5: serial@400aa000 {
 				status = "disabled";
 			};
 
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				interrupts = <0 54 0x04>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;