MIPS: BMIPS: change compile time checks to runtime checks

Allow building for all bmips cpus at the same time by changing ifdefs
to checks for the cpu type, or adding appropriate checks to the
assembly.

Since BMIPS43XX and BMIPS5000 require different IPI implementations,
split the SMP ops into one for each, so the runtime overhead is only
at registration time for them.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6241/

arch/mips/bcm63xx/prom.c

@@ -61,7 +61,7 @@ void __init prom_init(void)
 
 	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
 		/* set up SMP */
-		register_smp_ops(&bmips_smp_ops);
+		register_smp_ops(&bmips43xx_smp_ops);
 
 		/*
 		 * BCM6328 might not have its second CPU enabled, while BCM3368

arch/mips/include/asm/bmips.h

@@ -47,7 +47,8 @@
 #include <linux/cpumask.h>
 #include <asm/r4kcache.h>
 
-extern struct plat_smp_ops bmips_smp_ops;
+extern struct plat_smp_ops bmips43xx_smp_ops;
+extern struct plat_smp_ops bmips5000_smp_ops;
 extern char bmips_reset_nmi_vec;
 extern char bmips_reset_nmi_vec_end;
 extern char bmips_smp_movevec;

arch/mips/kernel/bmips_vec.S

@@ -13,6 +13,7 @@
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
 #include <asm/cacheops.h>
+#include <asm/cpu.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>
@@ -91,12 +92,18 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
 	beqz	k0, bmips_smp_entry
 
 #if defined(CONFIG_CPU_BMIPS5000)
+	mfc0	k0, CP0_PRID
+	li	k1, PRID_IMP_BMIPS5000
+	andi	k0, 0xff00
+	bne	k0, k1, 1f
+
 	/* if we're not on core 0, this must be the SMP boot signal */
 	li	k1, (3 << 25)
 	mfc0	k0, $22
 	and	k0, k1
 	bnez	k0, bmips_smp_entry
-#endif
+1:
+#endif /* CONFIG_CPU_BMIPS5000 */
 #endif /* CONFIG_SMP */
 
 	/* nope, it's just a regular NMI */
@@ -139,7 +146,12 @@ bmips_smp_entry:
 	xori	k0, 0x04
 	mtc0	k0, CP0_CONFIG
 
+	mfc0	k0, CP0_PRID
+	andi	k0, 0xff00
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+	li	k1, PRID_IMP_BMIPS43XX
+	bne	k0, k1, 2f
+
 	/* initialize CPU1's local I-cache */
 	li	k0, 0x80000000
 	li	k1, 0x80010000
@@ -150,14 +162,21 @@ bmips_smp_entry:
 1:	cache	Index_Store_Tag_I, 0(k0)
 	addiu	k0, 16
 	bne	k0, k1, 1b
-#elif defined(CONFIG_CPU_BMIPS5000)
+
+	b	3f
+2:
+#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */
+#if defined(CONFIG_CPU_BMIPS5000)
 	/* set exception vector base */
+	li	k1, PRID_IMP_BMIPS5000
+	bne	k0, k1, 3f
+
 	la	k0, ebase
 	lw	k0, 0(k0)
 	mtc0	k0, $15, 1
 	BARRIER
-#endif
-
+#endif /* CONFIG_CPU_BMIPS5000 */
+3:
 	/* jump back to kseg0 in case we need to remap the kseg1 area */
 	la	k0, 1f
 	jr	k0
@@ -221,8 +240,18 @@ END(bmips_smp_int_vec)
 LEAF(bmips_enable_xks01)
 
 #if defined(CONFIG_XKS01)
-
+	mfc0	t0, CP0_PRID
+	andi	t2, t0, 0xff00
 #if defined(CONFIG_CPU_BMIPS4380)
+	li	t1, PRID_IMP_BMIPS43XX
+	bne	t2, t1, 1f
+
+	andi	t0, 0xff
+	addiu	t1, t0, -PRID_REV_BMIPS4380_HI
+	bgtz	t1, 2f
+	addiu	t0, -PRID_REV_BMIPS4380_LO
+	bltz	t0, 2f
+
 	mfc0	t0, $22, 3
 	li	t1, 0x1ff0
 	li	t2, (1 << 12) | (1 << 9)
@@ -231,7 +260,13 @@ LEAF(bmips_enable_xks01)
 	or	t0, t2
 	mtc0	t0, $22, 3
 	BARRIER
-#elif defined(CONFIG_CPU_BMIPS5000)
+	b	2f
+1:
+#endif /* CONFIG_CPU_BMIPS4380 */
+#if defined(CONFIG_CPU_BMIPS5000)
+	li	t1, PRID_IMP_BMIPS5000
+	bne	t2, t1, 2f
+
 	mfc0	t0, $22, 5
 	li	t1, 0x01ff
 	li	t2, (1 << 8) | (1 << 5)
@@ -240,12 +275,8 @@ LEAF(bmips_enable_xks01)
 	or	t0, t2
 	mtc0	t0, $22, 5
 	BARRIER
-#else
-
-#error Missing XKS01 setup
-
-#endif
-
+#endif /* CONFIG_CPU_BMIPS5000 */
+2:
 #endif /* defined(CONFIG_XKS01) */
 
 	jr	ra