Commit 649675db authored by Jerome Brunet's avatar Jerome Brunet Committed by Kevin Hilman

arm64: dts: meson: g12a: add spdifouts

Add the devices nodes and pinctrl definitions for the spdif outputs of
the g12a SoC family
Signed-off-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent 1ff38c86
......@@ -643,6 +643,33 @@ mux {
};
};
spdif_out_h_pins: spdif-out-h {
mux {
groups = "spdif_out_h";
function = "spdif_out";
drive-strength-microamp = <500>;
bias-disable;
};
};
spdif_out_a11_pins: spdif-out-a11 {
mux {
groups = "spdif_out_a11";
function = "spdif_out";
drive-strength-microamp = <500>;
bias-disable;
};
};
spdif_out_a13_pins: spdif-out-a13 {
mux {
groups = "spdif_out_a13";
function = "spdif_out";
drive-strength-microamp = <500>;
bias-disable;
};
};
tdm_a_din0_pins: tdm-a-din0 {
mux {
groups = "tdm_a_din0";
......@@ -1312,6 +1339,18 @@ tdmin_lb: audio-controller@3c0 {
status = "disabled";
};
spdifout: audio-controller@480 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
status = "disabled";
};
tdmout_a: audio-controller@500 {
compatible = "amlogic,g12a-tdmout";
reg = <0x0 0x500 0x0 0x40>;
......@@ -1353,6 +1392,18 @@ tdmout_c: audio-controller@580 {
"lrclk", "lrclk_sel";
status = "disabled";
};
spdifout_b: audio-controller@680 {
compatible = "amlogic,g12a-spdifout",
"amlogic,axg-spdifout";
reg = <0x0 0x680 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT_B";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
<&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
clock-names = "pclk", "mclk";
status = "disabled";
};
};
usb3_pcie_phy: phy@46000 {
......@@ -1506,6 +1557,15 @@ mux {
};
};
spdif_ao_out_pins: spdif-ao-out {
mux {
groups = "spdif_ao_out";
function = "spdif_ao_out";
drive-strength-microamp = <500>;
bias-disable;
};
};
tdm_ao_b_din1_pins: tdm-ao-b-din1 {
mux {
groups = "tdm_ao_b_din1";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment