Commit 64a87b24 authored by Boaz Harrosh's avatar Boaz Harrosh Committed by James Bottomley

[SCSI] Let scsi_cmnd->cmnd use request->cmd buffer

 - struct scsi_cmnd had a 16 bytes command buffer of its own.
   This is an unnecessary duplication and copy of request's
   cmd. It is probably left overs from the time that scsi_cmnd
   could function without a request attached. So clean that up.

 - Once above is done, few places, apart from scsi-ml, needed
   adjustments due to changing the data type of scsi_cmnd->cmnd.

 - Lots of drivers still use MAX_COMMAND_SIZE. So I have left
   that #define but equate it to BLK_MAX_CDB. The way I see it
   and is reflected in the patch below is.
   MAX_COMMAND_SIZE - means: The longest fixed-length (*) SCSI CDB
                      as per the SCSI standard and is not related
                      to the implementation.
   BLK_MAX_CDB.     - The allocated space at the request level

 - I have audit all ISA drivers and made sure none use ->cmnd in a DMA
   Operation. Same audit was done by Andi Kleen.

(*)fixed-length here means commands that their size can be determined
   by their opcode and the CDB does not carry a length specifier, (unlike
   the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
   true and the SCSI standard also defines extended commands and
   vendor specific commands that can be bigger than 16 bytes. The kernel
   will support these using the same infrastructure used for VARLEN CDB's.
   So in effect MAX_COMMAND_SIZE means the maximum size command
   scsi-ml supports without specifying a cmd_len by ULD's
Signed-off-by: default avatarBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@HansenPartnership.com>
parent 9f5de6b1
......@@ -1487,7 +1487,7 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
if (scsi_sg_count(cmd) && sbp2_map_scatterlist(orb, device, lu) < 0)
goto out;
memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
memcpy(orb->request.command_block, cmd->cmnd, cmd->cmd_len);
orb->base.callback = complete_command_orb;
orb->base.request_bus =
......
......@@ -1055,7 +1055,7 @@ static void zfcp_scsi_dbf_event(const char *tag, const char *tag2, int level,
rec->scsi_result = scsi_cmnd->result;
rec->scsi_cmnd = (unsigned long)scsi_cmnd;
rec->scsi_serial = scsi_cmnd->serial_number;
memcpy(rec->scsi_opcode, &scsi_cmnd->cmnd,
memcpy(rec->scsi_opcode, scsi_cmnd->cmnd,
min((int)scsi_cmnd->cmd_len,
ZFCP_DBF_SCSI_OPCODE));
rec->scsi_retries = scsi_cmnd->retries;
......
......@@ -4014,7 +4014,7 @@ zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *fsf_req)
ZFCP_LOG_TRACE("scpnt->result =0x%x, command was:\n",
scpnt->result);
ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE,
(void *) &scpnt->cmnd, scpnt->cmd_len);
scpnt->cmnd, scpnt->cmd_len);
ZFCP_LOG_TRACE("%i bytes sense data provided by FCP\n",
fcp_rsp_iu->fcp_sns_len);
......
......@@ -599,7 +599,7 @@ NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
(struct NCR_700_command_slot *)SCp->host_scribble;
dma_unmap_single(hostdata->dev, slot->pCmd,
sizeof(SCp->cmnd), DMA_TO_DEVICE);
MAX_COMMAND_SIZE, DMA_TO_DEVICE);
if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
char *cmnd = NCR_700_get_sense_cmnd(SCp->device);
#ifdef NCR_700_DEBUG
......@@ -1004,7 +1004,7 @@ process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
* here */
NCR_700_unmap(hostdata, SCp, slot);
dma_unmap_single(hostdata->dev, slot->pCmd,
sizeof(SCp->cmnd),
MAX_COMMAND_SIZE,
DMA_TO_DEVICE);
cmnd[0] = REQUEST_SENSE;
......@@ -1901,7 +1901,7 @@ NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
}
slot->resume_offset = 0;
slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
sizeof(SCp->cmnd), DMA_TO_DEVICE);
MAX_COMMAND_SIZE, DMA_TO_DEVICE);
NCR_700_start_command(SCp);
return 0;
}
......
......@@ -895,7 +895,7 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru
} else {
scb->tag_msg = 0; /* No tag support */
}
memcpy(&scb->cdb[0], &cmd->cmnd, scb->cdb_len);
memcpy(scb->cdb, cmd->cmnd, scb->cdb_len);
}
/**
......
......@@ -465,7 +465,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
scp->request = (struct request *)&wait;
scp->timeout_per_command = timeout*HZ;
scp->cmd_len = 12;
memcpy(scp->cmnd, cmnd, 12);
scp->cmnd = cmnd;
cmndinfo.priority = IOCTL_PRI;
cmndinfo.internal_cmd_str = gdtcmd;
cmndinfo.internal_command = 1;
......
......@@ -763,9 +763,9 @@ static int hptiop_queuecommand(struct scsi_cmnd *scp,
scp,
host->host_no, scp->device->channel,
scp->device->id, scp->device->lun,
*((u32 *)&scp->cmnd),
*((u32 *)&scp->cmnd + 1),
*((u32 *)&scp->cmnd + 2),
((u32 *)scp->cmnd)[0],
((u32 *)scp->cmnd)[1],
((u32 *)scp->cmnd)[2],
_req->index, _req->req_virt);
scp->result = 0;
......
......@@ -739,7 +739,7 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
srp_cmd = &evt_struct->iu.srp.cmd;
memset(srp_cmd, 0x00, SRP_MAX_IU_LEN);
srp_cmd->opcode = SRP_CMD;
memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(cmnd->cmnd));
memcpy(srp_cmd->cdb, cmnd->cmnd, sizeof(srp_cmd->cdb));
srp_cmd->lun = ((u64) lun) << 48;
if (!map_data_for_srp_cmd(cmnd, evt_struct, srp_cmd, hostdata->dev)) {
......
......@@ -2590,7 +2590,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c
cblk->hastat = 0;
cblk->tastat = 0;
/* Command the command */
memcpy(&cblk->cdb[0], &cmnd->cmnd, cmnd->cmd_len);
memcpy(cblk->cdb, cmnd->cmnd, cmnd->cmd_len);
/* Set up tags */
if (cmnd->device->tagged_supported) { /* Tag Support */
......
......@@ -2858,7 +2858,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
/* Load SCSI command packet. */
pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
/* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
/* Set transfer direction. */
......@@ -3127,7 +3127,7 @@ qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
/* Load SCSI command packet. */
pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
memcpy(pkt->scsi_cdb, CMD_CDBP(cmd), CMD_CDBLEN(cmd));
/*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
/* Set transfer direction. */
......
......@@ -626,7 +626,7 @@ static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
* @scmd: SCSI command structure to hijack
* @ses: structure to save restore information
* @cmnd: CDB to send. Can be NULL if no new cmnd is needed
* @cmnd_size: size in bytes of @cmnd
* @cmnd_size: size in bytes of @cmnd (must be <= BLK_MAX_CDB)
* @sense_bytes: size of sense data to copy. or 0 (if != 0 @cmnd is ignored)
*
* This function is used to save a scsi command information before re-execution
......@@ -648,12 +648,14 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
* command.
*/
ses->cmd_len = scmd->cmd_len;
memcpy(ses->cmnd, scmd->cmnd, sizeof(scmd->cmnd));
ses->cmnd = scmd->cmnd;
ses->data_direction = scmd->sc_data_direction;
ses->sdb = scmd->sdb;
ses->next_rq = scmd->request->next_rq;
ses->result = scmd->result;
scmd->cmnd = ses->eh_cmnd;
memset(scmd->cmnd, 0, BLK_MAX_CDB);
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
scmd->request->next_rq = NULL;
......@@ -665,14 +667,13 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
scmd->sdb.table.sgl = &ses->sense_sgl;
scmd->sc_data_direction = DMA_FROM_DEVICE;
scmd->sdb.table.nents = 1;
memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
scmd->cmnd[0] = REQUEST_SENSE;
scmd->cmnd[4] = scmd->sdb.length;
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
} else {
scmd->sc_data_direction = DMA_NONE;
if (cmnd) {
memset(scmd->cmnd, 0, sizeof(scmd->cmnd));
BUG_ON(cmnd_size > BLK_MAX_CDB);
memcpy(scmd->cmnd, cmnd, cmnd_size);
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
}
......@@ -705,7 +706,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
* Restore original data
*/
scmd->cmd_len = ses->cmd_len;
memcpy(scmd->cmnd, ses->cmnd, sizeof(scmd->cmnd));
scmd->cmnd = ses->cmnd;
scmd->sc_data_direction = ses->data_direction;
scmd->sdb = ses->sdb;
scmd->request->next_rq = ses->next_rq;
......@@ -1774,8 +1775,8 @@ scsi_reset_provider(struct scsi_device *dev, int flag)
scmd->request = &req;
memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
memset(&scmd->cmnd, '\0', sizeof(scmd->cmnd));
scmd->cmnd = req.cmd;
scmd->scsi_done = scsi_reset_provider_done_command;
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
......
......@@ -1090,6 +1090,8 @@ static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
cmd->tag = req->tag;
cmd->request = req;
cmd->cmnd = req->cmd;
return cmd;
}
......@@ -1127,8 +1129,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
req->buffer = NULL;
}
BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
cmd->cmd_len = req->cmd_len;
if (!req->data_len)
cmd->sc_data_direction = DMA_NONE;
......@@ -1165,6 +1165,7 @@ int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
if (unlikely(!cmd))
return BLKPREP_DEFER;
memset(cmd->cmnd, 0, BLK_MAX_CDB);
return scsi_init_io(cmd, GFP_ATOMIC);
}
EXPORT_SYMBOL(scsi_setup_fs_cmnd);
......
......@@ -107,6 +107,8 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
cmd->jiffies_at_alloc = jiffies;
cmd->request = rq;
cmd->cmnd = rq->cmd;
rq->special = cmd;
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd_flags |= REQ_TYPE_BLOCK_PC;
......
......@@ -46,7 +46,7 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
}
memcpy(save_cmnd, srb->cmnd, sizeof(save_cmnd));
memset(srb->cmnd, 0, sizeof(srb->cmnd));
memset(srb->cmnd, 0, MAX_COMMAND_SIZE);
/* check if we support the command */
if (save_cmnd[1] >> 5) /* MULTIPLE_COUNT */
......
......@@ -292,6 +292,7 @@ struct isd200_info {
/* maximum number of LUNs supported */
unsigned char MaxLUNs;
unsigned char cmnd[BLK_MAX_CDB];
struct scsi_cmnd srb;
struct scatterlist sg;
};
......@@ -450,6 +451,7 @@ static int isd200_action( struct us_data *us, int action,
memset(&ata, 0, sizeof(ata));
memset(&srb_dev, 0, sizeof(srb_dev));
srb->cmnd = info->cmnd;
srb->device = &srb_dev;
++srb->serial_number;
......
......@@ -7,10 +7,28 @@
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
struct Scsi_Host;
struct scsi_device;
/*
* MAX_COMMAND_SIZE is:
* The longest fixed-length SCSI CDB as per the SCSI standard.
* fixed-length means: commands that their size can be determined
* by their opcode and the CDB does not carry a length specifier, (unlike
* the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
* true and the SCSI standard also defines extended commands and
* vendor specific commands that can be bigger than 16 bytes. The kernel
* will support these using the same infrastructure used for VARLEN CDB's.
* So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
* supports without specifying a cmd_len by ULD's
*/
#define MAX_COMMAND_SIZE 16
#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
#endif
struct scsi_data_buffer {
struct sg_table table;
unsigned length;
......@@ -64,8 +82,7 @@ struct scsi_cmnd {
enum dma_data_direction sc_data_direction;
/* These elements define the operation we are about to perform */
#define MAX_COMMAND_SIZE 16
unsigned char cmnd[MAX_COMMAND_SIZE];
unsigned char *cmnd;
struct timer_list eh_timeout; /* Used to time out the command. */
......
......@@ -75,11 +75,11 @@ struct scsi_eh_save {
int result;
enum dma_data_direction data_direction;
unsigned char cmd_len;
unsigned char cmnd[MAX_COMMAND_SIZE];
unsigned char *cmnd;
struct scsi_data_buffer sdb;
struct request *next_rq;
/* new command support */
unsigned char eh_cmnd[BLK_MAX_CDB];
struct scatterlist sense_sgl;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment