net: rename busy poll socket op and globals

Rename LL_SO to BUSY_POLL_SO
Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll}
Fix up users of these variables.
Fix documentation for sysctl.

a patch for the socket.7  man page will follow separately,
because of limitations of my mail setup.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/sysctl/net.txt

@@ -50,26 +50,27 @@ The maximum number of packets that kernel can handle on a NAPI interrupt,
 it's a Per-CPU variable.
 Default: 64
 
-low_latency_read
+busy_read
 ----------------
 Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL)
 Approximate time in us to busy loop waiting for packets on the device queue.
-This sets the default value of the SO_LL socket option.
-Can be set or overridden per socket by setting socket option SO_LL, which is
-the preferred method of enabling.
-If you need to enable the feature globally via sysctl, a value of 50 is recommended.
+This sets the default value of the SO_BUSY_POLL socket option.
+Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
+which is the preferred method of enabling. If you need to enable the feature
+globally via sysctl, a value of 50 is recommended.
 Will increase power usage.
 Default: 0 (off)
 
-low_latency_poll
+busy_poll
 ----------------
 Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL)
 Approximate time in us to busy loop waiting for events.
 Recommended value depends on the number of sockets you poll on.
 For several sockets 50, for several hundreds 100.
 For more than that you probably want to use epoll.
-Note that only sockets with SO_LL set will be busy polled, so you want to either
-selectively set SO_LL on those sockets or set sysctl.net.low_latency_read globally.
+Note that only sockets with SO_BUSY_POLL set will be busy polled,
+so you want to either selectively set SO_BUSY_POLL on those sockets or set
+sysctl.net.busy_read globally.
 Will increase power usage.
 Default: 0 (off)
 

arch/alpha/include/uapi/asm/socket.h

@@ -81,6 +81,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL			46
 
 #endif /* _UAPI_ASM_SOCKET_H */

arch/avr32/include/uapi/asm/socket.h

@@ -74,6 +74,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* __ASM_AVR32_SOCKET_H */

arch/cris/include/uapi/asm/socket.h

@@ -76,7 +76,7 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_SOCKET_H */
 

arch/frv/include/uapi/asm/socket.h

@@ -74,7 +74,7 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_SOCKET_H */
 

arch/h8300/include/uapi/asm/socket.h

@@ -74,6 +74,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_SOCKET_H */

arch/ia64/include/uapi/asm/socket.h

@@ -83,6 +83,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_IA64_SOCKET_H */

arch/m32r/include/uapi/asm/socket.h

@@ -74,6 +74,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_M32R_SOCKET_H */

arch/mips/include/uapi/asm/socket.h

@@ -92,6 +92,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _UAPI_ASM_SOCKET_H */

arch/mn10300/include/uapi/asm/socket.h

@@ -74,6 +74,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_SOCKET_H */

arch/parisc/include/uapi/asm/socket.h

@@ -73,7 +73,7 @@
 
 #define SO_SELECT_ERR_QUEUE	0x4026
 
-#define SO_LL			0x4027
+#define SO_BUSY_POLL		0x4027
 
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.

arch/powerpc/include/uapi/asm/socket.h

@@ -81,6 +81,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif	/* _ASM_POWERPC_SOCKET_H */

arch/s390/include/uapi/asm/socket.h

@@ -80,6 +80,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* _ASM_SOCKET_H */

arch/sparc/include/uapi/asm/socket.h

@@ -70,7 +70,7 @@
 
 #define SO_SELECT_ERR_QUEUE	0x0029
 
-#define SO_LL			0x0030
+#define SO_BUSY_POLL		0x0030
 
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001

arch/xtensa/include/uapi/asm/socket.h

@@ -85,6 +85,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif	/* _XTENSA_SOCKET_H */

include/net/busy_poll.h

@@ -30,8 +30,8 @@
 #ifdef CONFIG_NET_LL_RX_POLL
 
 struct napi_struct;
-extern unsigned int sysctl_net_ll_read __read_mostly;
-extern unsigned int sysctl_net_ll_poll __read_mostly;
+extern unsigned int sysctl_net_busy_read __read_mostly;
+extern unsigned int sysctl_net_busy_poll __read_mostly;
 
 /* return values from ndo_ll_poll */
 #define LL_FLUSH_FAILED		-1
@@ -39,7 +39,7 @@ extern unsigned int sysctl_net_ll_poll __read_mostly;
 
 static inline bool net_busy_loop_on(void)
 {
-	return sysctl_net_ll_poll;
+	return sysctl_net_busy_poll;
 }
 
 /* a wrapper to make debug_smp_processor_id() happy
@@ -72,7 +72,7 @@ static inline unsigned long sk_busy_loop_end_time(struct sock *sk)
 /* in poll/select we use the global sysctl_net_ll_poll value */
 static inline unsigned long busy_loop_end_time(void)
 {
-	return busy_loop_us_clock() + ACCESS_ONCE(sysctl_net_ll_poll);
+	return busy_loop_us_clock() + ACCESS_ONCE(sysctl_net_busy_poll);
 }
 
 static inline bool sk_can_busy_loop(struct sock *sk)

include/uapi/asm-generic/socket.h

@@ -76,6 +76,6 @@
 
 #define SO_SELECT_ERR_QUEUE	45
 
-#define SO_LL			46
+#define SO_BUSY_POLL		46
 
 #endif /* __ASM_GENERIC_SOCKET_H */

net/core/sock.c

@@ -901,7 +901,7 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 		break;
 
 #ifdef CONFIG_NET_LL_RX_POLL
-	case SO_LL:
+	case SO_BUSY_POLL:
 		/* allow unprivileged users to decrease the value */
 		if ((val > sk->sk_ll_usec) && !capable(CAP_NET_ADMIN))
 			ret = -EPERM;
@@ -1171,7 +1171,7 @@ int sock_getsockopt(struct socket *sock, int level, int optname,
 		break;
 
 #ifdef CONFIG_NET_LL_RX_POLL
-	case SO_LL:
+	case SO_BUSY_POLL:
 		v.val = sk->sk_ll_usec;
 		break;
 #endif
@@ -2294,7 +2294,7 @@ void sock_init_data(struct socket *sock, struct sock *sk)
 
 #ifdef CONFIG_NET_LL_RX_POLL
 	sk->sk_napi_id		=	0;
-	sk->sk_ll_usec		=	sysctl_net_ll_read;
+	sk->sk_ll_usec		=	sysctl_net_busy_read;
 #endif
 
 	/*

net/core/sysctl_net_core.c

@@ -300,15 +300,15 @@ static struct ctl_table net_core_table[] = {
 #endif /* CONFIG_NET_FLOW_LIMIT */
 #ifdef CONFIG_NET_LL_RX_POLL
 	{
-		.procname	= "low_latency_poll",
-		.data		= &sysctl_net_ll_poll,
+		.procname	= "busy_poll",
+		.data		= &sysctl_net_busy_poll,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec
 	},
 	{
-		.procname	= "low_latency_read",
-		.data		= &sysctl_net_ll_read,
+		.procname	= "busy_read",
+		.data		= &sysctl_net_busy_read,
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec

net/socket.c

@@ -107,8 +107,8 @@
 #include <net/busy_poll.h>
 
 #ifdef CONFIG_NET_LL_RX_POLL
-unsigned int sysctl_net_ll_read __read_mostly;
-unsigned int sysctl_net_ll_poll __read_mostly;
+unsigned int sysctl_net_busy_read __read_mostly;
+unsigned int sysctl_net_busy_poll __read_mostly;
 #endif
 
 static int sock_no_open(struct inode *irrelevant, struct file *dontcare);