Commit 65008dc6 authored by Matthew Wilcox's avatar Matthew Wilcox Committed by Linus Torvalds

[PATCH] Consolidate Kconfigs for binfmts

This patch creates fs/Kconfig.binfmt and converts all architectures to
use it.  I took the opportunity to spruce up the a.out help text for
the new millennium.
parent f36e10e5
...@@ -647,103 +647,7 @@ config SRM_ENV ...@@ -647,103 +647,7 @@ config SRM_ENV
This driver is also available as a module and will be called This driver is also available as a module and will be called
srm_env then. srm_env then.
config BINFMT_AOUT source "fs/Kconfig.binfmt"
tristate "Kernel support for a.out (ECOFF) binaries"
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used the
a.out formats QMAGIC and ZMAGIC until they were replaced with the
ELF format.
As more and more programs are converted to ELF, the use for a.out
will gradually diminish. If you disable this option it will reduce
your kernel by one page. This is not much and by itself does not
warrant removing support. However its removal is a good idea if you
wish to ensure that absolutely none of your programs will use this
older executable format. If you don't know what to answer at this
point then answer Y. If someone told you "You need a kernel with
QMAGIC support" then you'll have to say Y here. You may answer M to
compile a.out support as a module and later load the module when you
want to use a program or library in a.out format. The module will be
called binfmt_aout. Saying M or N here is dangerous though,
because some crucial programs on your system might still be in A.OUT
format.
config OSF4_COMPAT
bool "OSF/1 v4 readv/writev compatibility"
depends on BINFMT_AOUT
help
Say Y if you are using OSF/1 binaries (like Netscape and Acrobat)
with v4 shared libraries freely available from Compaq. If you're
going to use shared libraries from Tru64 version 5.0 or later, say N.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config BINFMT_EM86
tristate "Kernel support for Linux/Intel ELF binaries"
---help---
Say Y here if you want to be able to execute Linux/Intel ELF
binaries just like native Alpha binaries on your Alpha machine. For
this to work, you need to have the emulator /usr/bin/em86 in place.
You can get the same functionality by saying N here and saying Y to
"Kernel support for MISC binaries".
You may answer M to compile the emulation support as a module and
later load the module when you want to use a Linux/Intel binary. The
module will be called binfmt_em86. If unsure, say Y.
source "drivers/parport/Kconfig" source "drivers/parport/Kconfig"
......
...@@ -691,81 +691,7 @@ config KCORE_AOUT ...@@ -691,81 +691,7 @@ config KCORE_AOUT
endchoice endchoice
config BINFMT_AOUT source "fs/Kconfig.binfmt"
tristate "Kernel support for a.out binaries"
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used the
a.out formats QMAGIC and ZMAGIC until they were replaced with the
ELF format.
As more and more programs are converted to ELF, the use for a.out
will gradually diminish. If you disable this option it will reduce
your kernel by one page. This is not much and by itself does not
warrant removing support. However its removal is a good idea if you
wish to ensure that absolutely none of your programs will use this
older executable format. If you don't know what to answer at this
point then answer Y. If someone told you "You need a kernel with
QMAGIC support" then you'll have to say Y here. You may answer M to
compile a.out support as a module and later load the module when you
want to use a program or library in a.out format. The module will be
called binfmt_aout. Saying M or N here is dangerous though,
because some crucial programs on your system might still be in A.OUT
format.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config PM config PM
bool "Power Management support" bool "Power Management support"
......
...@@ -25,34 +25,7 @@ source "init/Kconfig" ...@@ -25,34 +25,7 @@ source "init/Kconfig"
menu "General setup" menu "General setup"
config BINFMT_ELF source "fs/Kconfig.binfmt"
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config ETRAX_KGDB config ETRAX_KGDB
bool "Use kernel gdb debugger" bool "Use kernel gdb debugger"
......
...@@ -141,10 +141,7 @@ config KCORE_AOUT ...@@ -141,10 +141,7 @@ config KCORE_AOUT
config KCORE_ELF config KCORE_ELF
default y default y
config BINFMT_FLAT source "fs/Kconfig.binfmt"
tristate "Kernel support for flat binaries"
help
Support uClinux FLAT format binaries.
endmenu endmenu
......
...@@ -1190,81 +1190,7 @@ config KCORE_AOUT ...@@ -1190,81 +1190,7 @@ config KCORE_AOUT
endchoice endchoice
config BINFMT_AOUT source "fs/Kconfig.binfmt"
tristate "Kernel support for a.out binaries"
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used the
a.out formats QMAGIC and ZMAGIC until they were replaced with the
ELF format.
As more and more programs are converted to ELF, the use for a.out
will gradually diminish. If you disable this option it will reduce
your kernel by one page. This is not much and by itself does not
warrant removing support. However its removal is a good idea if you
wish to ensure that absolutely none of your programs will use this
older executable format. If you don't know what to answer at this
point then answer Y. If someone told you "You need a kernel with
QMAGIC support" then you'll have to say Y here. You may answer M to
compile a.out support as a module and later load the module when you
want to use a program or library in a.out format. The module will be
called binfmt_aout. Saying M or N here is dangerous though,
because some crucial programs on your system might still be in A.OUT
format.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
endmenu endmenu
......
...@@ -493,38 +493,7 @@ config NR_CPUS ...@@ -493,38 +493,7 @@ config NR_CPUS
depends on SMP depends on SMP
default "64" default "64"
config BINFMT_ELF source "fs/Kconfig.binfmt"
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. Once you have registered such a binary class with the
kernel, you can start one of those programs simply by typing in its
name at a shell prompt; Linux will automatically feed it to the
correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
if !IA64_HP_SIM if !IA64_HP_SIM
......
...@@ -376,81 +376,7 @@ config KCORE_AOUT ...@@ -376,81 +376,7 @@ config KCORE_AOUT
endchoice endchoice
config BINFMT_AOUT source "fs/Kconfig.binfmt"
tristate "Kernel support for a.out binaries"
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used the
a.out formats QMAGIC and ZMAGIC until they were replaced with the
ELF format.
As more and more programs are converted to ELF, the use for a.out
will gradually diminish. If you disable this option it will reduce
your kernel by one page. This is not much and by itself does not
warrant removing support. However its removal is a good idea if you
wish to ensure that absolutely none of your programs will use this
older executable format. If you don't know what to answer at this
point then answer Y. If someone told you "You need a kernel with
QMAGIC support" then you'll have to say Y here. You may answer M to
compile a.out support as a module and later load the module when you
want to use a program or library in a.out format. The module will be
called binfmt_aout. Saying M or N here is dangerous though,
because some crucial programs on your system might still be in A.OUT
format.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config ZORRO config ZORRO
bool "Amiga Zorro (AutoConfig) bus support" bool "Amiga Zorro (AutoConfig) bus support"
......
...@@ -501,16 +501,7 @@ config KCORE_AOUT ...@@ -501,16 +501,7 @@ config KCORE_AOUT
config KCORE_ELF config KCORE_ELF
default y default y
config BINFMT_FLAT source "fs/Kconfig.binfmt"
tristate "Kernel support for flat binaries"
help
Support uClinux FLAT format binaries.
config BINFMT_ZFLAT
bool " Enable ZFLAT support"
depends on BINFMT_FLAT
help
Supoprt FLAT format compressed binaries
endmenu endmenu
......
...@@ -702,82 +702,7 @@ config ARC_CONSOLE ...@@ -702,82 +702,7 @@ config ARC_CONSOLE
bool "ARC console support" bool "ARC console support"
depends on ARC32 depends on ARC32
config BINFMT_AOUT source "fs/Kconfig.binfmt"
bool
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used the
a.out formats QMAGIC and ZMAGIC until they were replaced with the
ELF format.
As more and more programs are converted to ELF, the use for a.out
will gradually diminish. If you disable this option it will reduce
your kernel by one page. This is not much and by itself does not
warrant removing support. However its removal is a good idea if you
wish to ensure that absolutely none of your programs will use this
older executable format. If you don't know what to answer at this
point then answer Y. If someone told you "You need a kernel with
QMAGIC support" then you'll have to say Y here. You may answer M to
compile a.out support as a module and later load the module when you
want to use a program or library in a.out format. The module will be
called binfmt_aout. Saying M or N here is dangerous though,
because some crucial programs on your system might still be in A.OUT
format.
config BINFMT_ELF
bool
default y
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
source "drivers/pci/Kconfig" source "drivers/pci/Kconfig"
......
...@@ -335,34 +335,7 @@ config ARC_CONSOLE ...@@ -335,34 +335,7 @@ config ARC_CONSOLE
bool "ARC console support" bool "ARC console support"
depends on ARC32 depends on ARC32
config BINFMT_ELF source "fs/Kconfig.binfmt"
tristate "Kernel support for 64-bit ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config MIPS32_COMPAT config MIPS32_COMPAT
bool "Kernel support for Linux/MIPS 32-bit binary compatibility" bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
...@@ -378,37 +351,12 @@ config COMPAT ...@@ -378,37 +351,12 @@ config COMPAT
config BINFMT_ELF32 config BINFMT_ELF32
bool bool
depends on MIPS32_COMPAT depends on BINFMT_ELF && MIPS32_COMPAT
default y default y
help help
This allows you to run 32-bit Linux/ELF binaries on your Ultra. This allows you to run 32-bit Linux/ELF binaries on your Ultra.
Everybody wants this; say Y. Everybody wants this; say Y.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
endmenu endmenu
source "drivers/pci/Kconfig" source "drivers/pci/Kconfig"
......
...@@ -166,66 +166,7 @@ config KCORE_ELF ...@@ -166,66 +166,7 @@ config KCORE_ELF
depends on PROC_FS depends on PROC_FS
default y default y
config BINFMT_SOM source "fs/Kconfig.binfmt"
tristate "Kernel support for SOM binaries"
depends on HPUX
help
SOM is a binary executable format inherited from HP/UX. Say Y here
to be able to load and execute SOM binaries directly.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
endmenu endmenu
......
...@@ -808,42 +808,11 @@ config KCORE_ELF ...@@ -808,42 +808,11 @@ config KCORE_ELF
"-g" option to preserve debugging information. It is mainly used "-g" option to preserve debugging information. It is mainly used
for examining kernel data structures on the live kernel. for examining kernel data structures on the live kernel.
config BINFMT_ELF
bool
default y
help
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems.
config KERNEL_ELF config KERNEL_ELF
bool bool
default y default y
config BINFMT_MISC source "fs/Kconfig.binfmt"
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
source "drivers/pci/Kconfig" source "drivers/pci/Kconfig"
......
...@@ -191,37 +191,7 @@ config KCORE_ELF ...@@ -191,37 +191,7 @@ config KCORE_ELF
"-g" option to preserve debugging information. It is mainly used "-g" option to preserve debugging information. It is mainly used
for examining kernel data structures on the live kernel. for examining kernel data structures on the live kernel.
config BINFMT_ELF source "fs/Kconfig.binfmt"
bool "Kernel support for 64-bit ELF binaries"
help
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
source "drivers/pci/Kconfig" source "drivers/pci/Kconfig"
......
...@@ -192,78 +192,8 @@ endchoice ...@@ -192,78 +192,8 @@ endchoice
config KCORE_ELF config KCORE_ELF
bool bool
default y default y
---help---
If you enabled support for /proc file system then the file
/proc/kcore will contain the kernel core image. This can be used
in gdb:
$ cd /usr/src/linux ; gdb vmlinux /proc/kcore
You have two choices here: ELF and A.OUT. Selecting ELF will make
/proc/kcore appear in ELF core format as defined by the Executable
and Linking Format specification. Selecting A.OUT will choose the
old "a.out" format which may be necessary for some old versions
of binutils or on some architectures.
This is especially useful if you have compiled the kernel with the
"-g" option to preserve debugging information. It is mainly used
for examining kernel data structures on the live kernel so if you
don't understand what this means or are not a kernel hacker, just
leave it at its default value ELF.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y source "fs/Kconfig.binfmt"
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config PROCESS_DEBUG config PROCESS_DEBUG
bool "Show crashed user process info" bool "Show crashed user process info"
......
...@@ -763,62 +763,7 @@ config KCORE_AOUT ...@@ -763,62 +763,7 @@ config KCORE_AOUT
endchoice endchoice
config BINFMT_ELF source "fs/Kconfig.binfmt"
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_FLAT
tristate "Kernel support for FLAT binaries"
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
endmenu endmenu
......
...@@ -277,81 +277,7 @@ config KCORE_ELF ...@@ -277,81 +277,7 @@ config KCORE_ELF
don't understand what this means or are not a kernel hacker, just don't understand what this means or are not a kernel hacker, just
leave it at its default value ELF. leave it at its default value ELF.
config BINFMT_AOUT source "fs/Kconfig.binfmt"
tristate "Kernel support for a.out binaries"
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used the
a.out formats QMAGIC and ZMAGIC until they were replaced with the
ELF format.
As more and more programs are converted to ELF, the use for a.out
will gradually diminish. If you disable this option it will reduce
your kernel by one page. This is not much and by itself does not
warrant removing support. However its removal is a good idea if you
wish to ensure that absolutely none of your programs will use this
older executable format. If you don't know what to answer at this
point then answer Y. If someone told you "You need a kernel with
QMAGIC support" then you'll have to say Y here. You may answer M to
compile a.out support as a module and later load the module when you
want to use a program or library in a.out format. The module will be
called binfmt_aout. Saying M or N here is dangerous though,
because some crucial programs on your system might still be in A.OUT
format.
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config SUNOS_EMUL config SUNOS_EMUL
bool "SunOS binary emulation" bool "SunOS binary emulation"
......
...@@ -415,59 +415,7 @@ config BINFMT_AOUT32 ...@@ -415,59 +415,7 @@ config BINFMT_AOUT32
If you want to run SunOS binaries (see SunOS binary emulation below) If you want to run SunOS binaries (see SunOS binary emulation below)
or other a.out binaries, say Y. If unsure, say N. or other a.out binaries, say Y. If unsure, say N.
config BINFMT_ELF source "fs/Kconfig.binfmt"
tristate "Kernel support for 64-bit ELF binaries"
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config SUNOS_EMUL config SUNOS_EMUL
bool "SunOS binary emulation" bool "SunOS binary emulation"
......
...@@ -62,14 +62,7 @@ config MODE_SKAS ...@@ -62,14 +62,7 @@ config MODE_SKAS
config NET config NET
bool "Networking support" bool "Networking support"
config BINFMT_AOUT source "fs/Kconfig.binfmt"
tristate "Kernel support for a.out binaries"
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
config HOSTFS config HOSTFS
tristate "Host filesystem" tristate "Host filesystem"
......
...@@ -243,16 +243,7 @@ config KCORE_AOUT ...@@ -243,16 +243,7 @@ config KCORE_AOUT
config KCORE_ELF config KCORE_ELF
default y default y
config BINFMT_FLAT source "fs/Kconfig.binfmt"
tristate "Kernel support for flat binaries"
help
Support uClinux FLAT format binaries.
config BINFMT_ZFLAT
bool " Enable ZFLAT support"
depends on BINFMT_FLAT
help
Support FLAT format compressed binaries
endmenu endmenu
......
...@@ -375,31 +375,7 @@ config KCORE_ELF ...@@ -375,31 +375,7 @@ config KCORE_ELF
depends on PROC_FS depends on PROC_FS
default y default y
config BINFMT_ELF source "fs/Kconfig.binfmt"
bool
default y
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. Once you have registered such a binary class with the kernel,
you can start one of those programs simply by typing in its name at a shell
prompt; Linux will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You must say Y to "/proc file system support" (CONFIG_PROC_FS) to
use this part of the kernel.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
config IA32_EMULATION config IA32_EMULATION
bool "IA32 Emulation" bool "IA32 Emulation"
......
config BINFMT_ELF
tristate "Kernel support for ELF binaries"
depends on MMU
default y
---help---
ELF (Executable and Linkable Format) is a format for libraries and
executables used across different architectures and operating
systems. Saying Y here will enable your kernel to run ELF binaries
and enlarge it by about 13 KB. ELF support under Linux has now all
but replaced the traditional Linux a.out formats (QMAGIC and ZMAGIC)
because it is portable (this does *not* mean that you will be able
to run executables from different architectures or operating systems
however) and makes building run-time libraries very easy. Many new
executables are distributed solely in ELF format. You definitely
want to say Y here.
Information about ELF is contained in the ELF HOWTO available from
<http://www.tldp.org/docs.html#howto>.
If you find that after upgrading from Linux kernel 1.2 and saying Y
here, you still can't run any ELF binaries (they just crash), then
you'll have to install the newest ELF runtime libraries, including
ld.so (check the file <file:Documentation/Changes> for location and
latest version).
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called binfmt_elf. Saying M or N here is dangerous because
some crucial programs on your system might be in ELF format.
config BINFMT_FLAT
tristate "Kernel support for flat binaries"
depends on !MMU || SUPERH
help
Support uClinux FLAT format binaries.
config BINFMT_ZFLAT
bool "Enable ZFLAT support"
depends on BINFMT_FLAT
help
Support FLAT format compressed binaries
config BINFMT_AOUT
tristate "Kernel support for a.out and ECOFF binaries"
depends on X86 || ALPHA || ARM || M68K || MIPS || SPARC
---help---
A.out (Assembler.OUTput) is a set of formats for libraries and
executables used in the earliest versions of UNIX. Linux used
the a.out formats QMAGIC and ZMAGIC until they were replaced
with the ELF format.
The conversion to ELF started in 1995. This option is primarily
provided for historical interest and for the benefit of those
who need to run binaries from that era.
Most people should answer N here. If you think you may have
occasional use for this format, enable module support above
and answer M here to compile this support as a module called
binfmt_aout.
If any crucial components of your system (such as /sbin/init
or /lib/ld.so) are still in a.out format, you will have to
say Y here.
config OSF4_COMPAT
bool "OSF/1 v4 readv/writev compatibility"
depends on ALPHA && BINFMT_AOUT
help
Say Y if you are using OSF/1 binaries (like Netscape and Acrobat)
with v4 shared libraries freely available from Compaq. If you're
going to use shared libraries from Tru64 version 5.0 or later, say N.
config BINFMT_EM86
tristate "Kernel support for Linux/Intel ELF binaries"
depends on ALPHA
---help---
Say Y here if you want to be able to execute Linux/Intel ELF
binaries just like native Alpha binaries on your Alpha machine. For
this to work, you need to have the emulator /usr/bin/em86 in place.
You can get the same functionality by saying N here and saying Y to
"Kernel support for MISC binaries".
You may answer M to compile the emulation support as a module and
later load the module when you want to use a Linux/Intel binary. The
module will be called binfmt_em86. If unsure, say Y.
config BINFMT_SOM
tristate "Kernel support for SOM binaries"
depends on PARISC && HPUX
help
SOM is a binary executable format inherited from HP/UX. Say
Y here to be able to load and execute SOM binaries directly.
config BINFMT_MISC
tristate "Kernel support for MISC binaries"
---help---
If you say Y here, it will be possible to plug wrapper-driven binary
formats into the kernel. You will like this especially when you use
programs that need an interpreter to run like Java, Python or
Emacs-Lisp. It's also useful if you often run DOS executables under
the Linux DOS emulator DOSEMU (read the DOSEMU-HOWTO, available from
<http://www.tldp.org/docs.html#howto>). Once you have
registered such a binary class with the kernel, you can start one of
those programs simply by typing in its name at a shell prompt; Linux
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
feature, and <file:Documentation/java.txt> for information about how
to include Java support.
You may say M here for module support and later load the module when
you have use for it; the module is called binfmt_misc. If you
don't know what to answer at this point, say Y.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment