ARM: kirkwood: Move NSA310 common parts to include file

 Move definitions that are common to both nsa-310.dts and
 nsa310a.dts and that will also be used in nsa320 into
 kirkwood-nsa310-common.dtsi. Also rename the USB
 Regulator to remove the word off from its name as the
 state of a regulator shouldn't be part of its name.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Link: https://lkml.kernel.org/r/1396820569-3841-1-git-send-email-linux@baker-net.org.ukReviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-nsa310-common.dtsi

@@ -7,15 +7,40 @@ / {
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
-			pmx_usb_power_off: pmx-usb-power-off {
+			pmx_usb_power: pmx-usb-power {
 				marvell,pins = "mpp21";
 				marvell,function = "gpio";
 			};
+
 			pmx_pwr_off: pmx-pwr-off {
 				marvell,pins = "mpp48";
 				marvell,function = "gpio";
 			};
 
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
 		};
 
 		serial@12000 {
@@ -43,17 +68,42 @@ gpio_poweroff {
 		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
 	};
 
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_off>;
+		pinctrl-0 = <&pmx_usb_power>;
 		pinctrl-names = "default";
 
-		usb0_power_off: regulator@1 {
+		usb0_power: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "USB Power Off";
+			regulator-name = "USB Power";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			regulator-always-on;

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -59,26 +59,6 @@ pmx_led_sys_red: pmx-led-sys-red {
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_hdd_green: pmx-led-hdd-green {
 				marvell,pins = "mpp41";
 				marvell,function = "gpio";
@@ -94,10 +74,6 @@ pmx_unknown: pmx-unknown {
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
 		};
 
 		i2c@11000 {
@@ -110,30 +86,6 @@ adt7476: adt7476a@2e {
 		};
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red

arch/arm/boot/dts/kirkwood-nsa310a.dts

@@ -38,11 +38,6 @@ pmx_led_usb_green: pmx-led-usb-green {
 				marvell,function = "gpio";
 			};
 
-			pmx_usb_power_off: pmx-usb-power-off {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_sys_green: pmx-led-sys-green {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
@@ -53,26 +48,6 @@ pmx_led_sys_red: pmx-led-sys-red {
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_reset: pmx-btn-reset {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-
-			pmx_btn_copy: pmx-btn-copy {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_green: pmx-led-copy-green {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_copy_red: pmx-led-copy-red {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-
 			pmx_led_hdd_green: pmx-led-hdd-green {
 				marvell,pins = "mpp41";
 				marvell,function = "gpio";
@@ -83,11 +58,6 @@ pmx_led_hdd_red: pmx-led-hdd-red {
 				marvell,function = "gpio";
 			};
 
-			pmx_btn_power: pmx-btn-power {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-
 		};
 
 		i2c@11000 {
@@ -100,28 +70,6 @@ lm85: lm85@2e {
 		};
 	};
 
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			label = "Power Button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-		button@2 {
-			label = "Copy Button";
-			linux,code = <KEY_COPY>;
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-		};
-		button@3 {
-			label = "Reset Button";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-		};
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";