Commit 656a999e authored by Alexander Aring's avatar Alexander Aring Committed by Marcel Holtmann

ieee820154: add backoff exponent setting support

This patch adds support for setting backoff exponents via nl802154
framework.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 9830c62a
......@@ -42,6 +42,9 @@ struct cfg802154_ops {
struct wpan_dev *wpan_dev, u16 pan_id);
int (*set_short_addr)(struct wpan_phy *wpan_phy,
struct wpan_dev *wpan_dev, u16 short_addr);
int (*set_backoff_exponent)(struct wpan_phy *wpan_phy,
struct wpan_dev *wpan_dev, u8 min_be,
u8 max_be);
};
struct wpan_phy {
......
......@@ -616,6 +616,32 @@ static int nl802154_set_short_addr(struct sk_buff *skb, struct genl_info *info)
return rdev_set_short_addr(rdev, wpan_dev, short_addr);
}
static int
nl802154_set_backoff_exponent(struct sk_buff *skb, struct genl_info *info)
{
struct cfg802154_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct wpan_dev *wpan_dev = dev->ieee802154_ptr;
u8 min_be, max_be;
/* should be set on netif open inside phy settings */
if (netif_running(dev))
return -EBUSY;
if (!info->attrs[NL802154_ATTR_MIN_BE] ||
!info->attrs[NL802154_ATTR_MAX_BE])
return -EINVAL;
min_be = nla_get_u8(info->attrs[NL802154_ATTR_MIN_BE]);
max_be = nla_get_u8(info->attrs[NL802154_ATTR_MAX_BE]);
/* check 802.15.4 constraints */
if (max_be < 3 || max_be > 8 || min_be > max_be)
return -EINVAL;
return rdev_set_backoff_exponent(rdev, wpan_dev, min_be, max_be);
}
#define NL802154_FLAG_NEED_WPAN_PHY 0x01
#define NL802154_FLAG_NEED_NETDEV 0x02
#define NL802154_FLAG_NEED_RTNL 0x04
......@@ -750,6 +776,14 @@ static const struct genl_ops nl802154_ops[] = {
.internal_flags = NL802154_FLAG_NEED_NETDEV |
NL802154_FLAG_NEED_RTNL,
},
{
.cmd = NL802154_CMD_SET_BACKOFF_EXPONENT,
.doit = nl802154_set_backoff_exponent,
.policy = nl802154_policy,
.flags = GENL_ADMIN_PERM,
.internal_flags = NL802154_FLAG_NEED_NETDEV |
NL802154_FLAG_NEED_RTNL,
},
};
/* initialisation/exit functions */
......
......@@ -41,4 +41,13 @@ rdev_set_short_addr(struct cfg802154_registered_device *rdev,
return rdev->ops->set_short_addr(&rdev->wpan_phy, wpan_dev, short_addr);
}
static inline int
rdev_set_backoff_exponent(struct cfg802154_registered_device *rdev,
struct wpan_dev *wpan_dev, const u8 min_be,
const u8 max_be)
{
return rdev->ops->set_backoff_exponent(&rdev->wpan_phy, wpan_dev,
min_be, max_be);
}
#endif /* __CFG802154_RDEV_OPS */
......@@ -83,6 +83,23 @@ static int ieee802154_set_pan_id(struct wpan_phy *wpan_phy,
return 0;
}
static int
ieee802154_set_backoff_exponent(struct wpan_phy *wpan_phy,
struct wpan_dev *wpan_dev,
const u8 min_be, const u8 max_be)
{
struct ieee802154_local *local = wpan_phy_priv(wpan_phy);
ASSERT_RTNL();
if (!(local->hw.flags & IEEE802154_HW_CSMA_PARAMS))
return -EOPNOTSUPP;
wpan_dev->min_be = min_be;
wpan_dev->max_be = max_be;
return 0;
}
static int
ieee802154_set_short_addr(struct wpan_phy *wpan_phy, struct wpan_dev *wpan_dev,
const u16 short_addr)
......@@ -114,4 +131,5 @@ const struct cfg802154_ops mac802154_config_ops = {
.set_channel = ieee802154_set_channel,
.set_pan_id = ieee802154_set_pan_id,
.set_short_addr = ieee802154_set_short_addr,
.set_backoff_exponent = ieee802154_set_backoff_exponent,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment