Commit 656e39fe authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: addi_apci_3xxx: only allocate needed subdevices

The number of subdevices needed by a given board supported by this
driver can cary from 2 (for the apci3500) to a maximum of 5. Currently
this driver always allocates 7 subdevices and sets the subdevice type
to COMEDI_SUBD_UNUSED for the ones that are not needed.

Calculate the actual number of needed subdevices from the boardinfo
and only allocate and setup the ones that are used.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f32376e9
......@@ -790,7 +790,9 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
const struct apci3xxx_boardinfo *board = NULL;
struct apci3xxx_private *devpriv;
struct comedi_subdevice *s;
int ret, n_subdevices;
int n_subdevices;
int subdev;
int ret;
if (context < ARRAY_SIZE(apci3xxx_boardtypes))
board = &apci3xxx_boardtypes[context];
......@@ -818,14 +820,18 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
dev->irq = pcidev->irq;
}
n_subdevices = 7;
n_subdevices = (board->ai_n_chan ? 0 : 1) + board->has_ao +
board->has_dig_in + board->has_dig_out +
board->has_ttl_io;
ret = comedi_alloc_subdevices(dev, n_subdevices);
if (ret)
return ret;
subdev = 0;
/* Analog Input subdevice */
s = &dev->subdevices[0];
if (board->ai_n_chan) {
s = &dev->subdevices[subdev];
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | board->ai_subdev_flags;
s->n_chan = board->ai_n_chan;
......@@ -840,56 +846,52 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
s->do_cmd = apci3xxx_ai_cmd;
s->cancel = apci3xxx_ai_cancel;
}
} else {
s->type = COMEDI_SUBD_UNUSED;
subdev++;
}
/* Analog Output subdevice */
s = &dev->subdevices[1];
if (board->has_ao) {
s = &dev->subdevices[subdev];
s->type = COMEDI_SUBD_AO;
s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
s->n_chan = 4;
s->maxdata = 0x0fff;
s->range_table = &apci3xxx_ao_range;
s->insn_write = apci3xxx_ao_insn_write;
} else {
s->type = COMEDI_SUBD_UNUSED;
subdev++;
}
/* Digital Input subdevice */
s = &dev->subdevices[2];
if (board->has_dig_in) {
s = &dev->subdevices[subdev];
s->type = COMEDI_SUBD_DI;
s->subdev_flags = SDF_READABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = apci3xxx_di_insn_bits;
} else {
s->type = COMEDI_SUBD_UNUSED;
subdev++;
}
/* Digital Output subdevice */
s = &dev->subdevices[3];
if (board->has_dig_out) {
s = &dev->subdevices[subdev];
s->type = COMEDI_SUBD_DO;
s->subdev_flags = SDF_WRITEABLE;
s->n_chan = 4;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = apci3xxx_do_insn_bits;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
/* Allocate and Initialise Timer Subdevice Structures */
s = &dev->subdevices[4];
s->type = COMEDI_SUBD_UNUSED;
subdev++;
}
/* TTL Digital I/O subdevice */
s = &dev->subdevices[5];
if (board->has_ttl_io) {
s = &dev->subdevices[subdev];
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITEABLE;
s->n_chan = 24;
......@@ -898,13 +900,9 @@ static int apci3xxx_auto_attach(struct comedi_device *dev,
s->range_table = &range_digital;
s->insn_config = apci3xxx_dio_insn_config;
s->insn_bits = apci3xxx_dio_insn_bits;
} else {
s->type = COMEDI_SUBD_UNUSED;
}
/* EEPROM */
s = &dev->subdevices[6];
s->type = COMEDI_SUBD_UNUSED;
subdev++;
}
apci3xxx_reset(dev);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment