Commit 6585dea1 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-soc

* 'next/cross-platform' of git://git.linaro.org/people/arnd/arm-soc:
  arm/imx: use Kconfig choice for low-level debug UART selection
  ARM: realview: use Kconfig choice for debug UART selection
  ARM: plat-samsung: use Kconfig choice for debug UART selection
  ARM: versatile: convert logical CPU numbers to physical numbers
  ARM: ux500: convert logical CPU numbers to physical numbers
  ARM: shmobile: convert logical CPU numbers to physical numbers
  ARM: msm: convert logical CPU numbers to physical numbers
  ARM: exynos4: convert logical CPU numbers to physical numbers

Fix up trivial conflict (config DEBUG_S3C_UART move/split vs addition of
ARM_KPROBES_TEST option) in arch/arm/Kconfig.debug
parents 16ee792e 97c24c1a
......@@ -128,6 +128,111 @@ choice
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_IMX1_UART
bool "i.MX1 Debug UART"
depends on SOC_IMX1
help
Say Y here if you want kernel low-level debugging support
on i.MX1.
config DEBUG_IMX23_UART
bool "i.MX23 Debug UART"
depends on SOC_IMX23
help
Say Y here if you want kernel low-level debugging support
on i.MX23.
config DEBUG_IMX25_UART
bool "i.MX25 Debug UART"
depends on SOC_IMX25
help
Say Y here if you want kernel low-level debugging support
on i.MX25.
config DEBUG_IMX21_IMX27_UART
bool "i.MX21 and i.MX27 Debug UART"
depends on SOC_IMX21 || SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
on i.MX21 or i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
depends on SOC_IMX28
help
Say Y here if you want kernel low-level debugging support
on i.MX28.
config DEBUG_IMX31_IMX35_UART
bool "i.MX31 and i.MX35 Debug UART"
depends on SOC_IMX31 || SOC_IMX35
help
Say Y here if you want kernel low-level debugging support
on i.MX31 or i.MX35.
config DEBUG_IMX51_UART
bool "i.MX51 Debug UART"
depends on SOC_IMX51
help
Say Y here if you want kernel low-level debugging support
on i.MX51.
config DEBUG_IMX50_IMX53_UART
bool "i.MX50 and i.MX53 Debug UART"
depends on SOC_IMX50 || SOC_IMX53
help
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
help
Say Y here if you want the debug print routines to direct
their output to the serial port on RealView EB, PB11MP, PBA8
and PBX platforms.
config DEBUG_REALVIEW_PB1176_PORT
bool "RealView PB1176 UART"
depends on MACH_REALVIEW_PB1176
help
Say Y here if you want the debug print routines to direct
their output to the standard serial port on the RealView
PB1176 platform.
endchoice
config EARLY_PRINTK
......@@ -146,18 +251,6 @@ config OC_ETM
buffer driver that will allow you to collect traces of the
kernel code.
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int "S3C UART to use for low-level debug"
default "0"
help
Choice for UART for kernel low-level using S3C UARTS,
should be between zero and two. The port must have been
initialised by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config ARM_KPROBES_TEST
tristate "Kprobes test module"
depends on KPROBES && MODULES
......
......@@ -75,7 +75,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
:
: "memory", "cc");
if (pen_release == cpu) {
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
......
......@@ -132,7 +132,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
write_pen_release(cpu);
write_pen_release(cpu_logical_map(cpu));
if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
__raw_writel(S5P_CORE_LOCAL_PWR_EN,
......
......@@ -37,7 +37,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
:
: "memory", "cc");
if (pen_release == cpu) {
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
......
......@@ -117,7 +117,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Note that "pen_release" is the hardware CPU ID, whereas
* "cpu" is Linux's internal ID.
*/
pen_release = cpu;
pen_release = cpu_logical_map(cpu);
__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
......
......@@ -14,17 +14,9 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
#ifdef CONFIG_SOC_IMX23
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#ifdef CONFIG_DEBUG_IMX23_UART
#define UART_PADDR MX23_DUART_BASE_ADDR
#endif
#ifdef CONFIG_SOC_IMX28
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#elif defined (CONFIG_DEBUG_IMX28_UART)
#define UART_PADDR MX28_DUART_BASE_ADDR
#endif
......
......@@ -69,7 +69,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
:
: "memory", "cc");
if (pen_release == cpu) {
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
......
......@@ -10,23 +10,10 @@
* published by the Free Software Foundation.
*/
#if defined(CONFIG_MACH_REALVIEW_EB) || \
defined(CONFIG_MACH_REALVIEW_PB11MP) || \
defined(CONFIG_MACH_REALVIEW_PBA8) || \
defined(CONFIG_MACH_REALVIEW_PBX)
#ifndef DEBUG_LL_UART_OFFSET
#ifdef CONFIG_DEBUG_REALVIEW_STD_PORT
#define DEBUG_LL_UART_OFFSET 0x00009000
#elif DEBUG_LL_UART_OFFSET != 0x00009000
#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
#endif
#endif
#ifdef CONFIG_MACH_REALVIEW_PB1176
#ifndef DEBUG_LL_UART_OFFSET
#elif defined(CONFIG_DEBUG_REALVIEW_PB1176_PORT)
#define DEBUG_LL_UART_OFFSET 0x0010c000
#elif DEBUG_LL_UART_OFFSET != 0x0010c000
#warning "DEBUG_LL_UART_OFFSET already defined to a different value"
#endif
#endif
#ifndef DEBUG_LL_UART_OFFSET
......
......@@ -74,6 +74,8 @@ void __cpuinit sh73a0_secondary_init(unsigned int cpu)
int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
{
cpu = cpu_logical_map(cpu);
/* enable cache coherency */
modify_scu_cpu_psr(0, 3 << (cpu * 8));
......@@ -87,6 +89,8 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
void __init sh73a0_smp_prepare_cpus(void)
{
int cpu = cpu_logical_map(0);
scu_enable(scu_base_addr());
/* Map the reset vector (in headsmp.S) */
......@@ -94,5 +98,5 @@ void __init sh73a0_smp_prepare_cpus(void)
__raw_writel(__pa(shmobile_secondary_vector), __io(SBAR));
/* enable cache coherency on CPU0 */
modify_scu_cpu_psr(0, 3 << (0 * 8));
modify_scu_cpu_psr(0, 3 << (cpu * 8));
}
......@@ -24,7 +24,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
for (;;) {
__asm__ __volatile__("dsb\n\t" "wfi\n\t"
: : : "memory");
if (pen_release == cpu) {
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
......
......@@ -96,7 +96,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* the holding pen - release it, then wait for it to flag
* that it has been released by resetting pen_release.
*/
write_pen_release(cpu);
write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
......
......@@ -65,7 +65,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
for (;;) {
wfi();
if (pen_release == cpu) {
if (pen_release == cpu_logical_map(cpu)) {
/*
* OK, proper wakeup, we're done
*/
......
......@@ -12,43 +12,17 @@
*/
#include <mach/hardware.h>
#ifdef CONFIG_SOC_IMX1
#ifdef CONFIG_DEBUG_IMX1_UART
#define UART_PADDR MX1_UART1_BASE_ADDR
#endif
#ifdef CONFIG_SOC_IMX25
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#elif defined (CONFIG_DEBUG_IMX25_UART)
#define UART_PADDR MX25_UART1_BASE_ADDR
#endif
#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#elif defined (CONFIG_DEBUG_IMX21_IMX27_UART)
#define UART_PADDR MX2x_UART1_BASE_ADDR
#endif
#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#elif defined (CONFIG_DEBUG_IMX31_IMX35_UART)
#define UART_PADDR MX3x_UART1_BASE_ADDR
#endif
#ifdef CONFIG_SOC_IMX51
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#elif defined (CONFIG_DEBUG_IMX51_UART)
#define UART_PADDR MX51_UART1_BASE_ADDR
#endif
/* iMX50/53 have same addresses, but not iMX51 */
#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
#endif
......
......@@ -362,4 +362,11 @@ config SAMSUNG_PD
help
Say Y here if you want to control Power Domain by Runtime PM.
config DEBUG_S3C_UART
depends on PLAT_SAMSUNG
int
default "0" if DEBUG_S3C_UART0
default "1" if DEBUG_S3C_UART1
default "2" if DEBUG_S3C_UART2
endif
......@@ -77,7 +77,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* since we haven't sent them a soft interrupt, they shouldn't
* be there.
*/
write_pen_release(cpu);
write_pen_release(cpu_logical_map(cpu));
/*
* Send the secondary CPU a soft interrupt, thereby causing
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment