net/mlx5e: Remove unused fields from datapath structs

No need to keep max_sq_wqebbs in mlx5e_txqsq and mlx5e_xdpsq, as it's
only used when allocating the queues. Removing an extra field reduces
the struct size.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -478,7 +478,6 @@ struct mlx5e_txqsq {
 	struct work_struct         recover_work;
 	struct mlx5e_ptpsq        *ptpsq;
 	cqe_ts_to_ns               ptp_cyc2time;
-	u16                        max_sq_wqebbs;
 } ____cacheline_aligned_in_smp;
 
 struct mlx5e_dma_info {
@@ -582,7 +581,6 @@ struct mlx5e_xdpsq {
 	/* control path */
 	struct mlx5_wq_ctrl        wq_ctrl;
 	struct mlx5e_channel      *channel;
-	u16                        max_sq_wqebbs;
 } ____cacheline_aligned_in_smp;
 
 struct mlx5e_ktls_resync_resp;

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -1155,9 +1155,9 @@ static int mlx5e_alloc_xdpsq(struct mlx5e_channel *c,
 		is_redirect ?
 			&c->priv->channel_stats[c->ix]->xdpsq :
 			&c->priv->channel_stats[c->ix]->rq_xdpsq;
-	sq->max_sq_wqebbs = mlx5e_get_max_sq_wqebbs(mdev);
-	sq->stop_room = MLX5E_STOP_ROOM(sq->max_sq_wqebbs);
-	sq->max_sq_mpw_wqebbs = mlx5e_get_sw_max_sq_mpw_wqebbs(sq->max_sq_wqebbs);
+	sq->stop_room = MLX5E_STOP_ROOM(mlx5e_get_max_sq_wqebbs(mdev));
+	sq->max_sq_mpw_wqebbs =
+		mlx5e_get_sw_max_sq_mpw_wqebbs(mlx5e_get_max_sq_wqebbs(mdev));
 
 	param->wq.db_numa_node = cpu_to_node(c->cpu);
 	err = mlx5_wq_cyc_create(mdev, &param->wq, sqc_wq, wq, &sq->wq_ctrl);
@@ -1318,8 +1318,8 @@ static int mlx5e_alloc_txqsq(struct mlx5e_channel *c,
 	sq->uar_map   = mdev->mlx5e_res.hw_objs.bfreg.map;
 	sq->min_inline_mode = params->tx_min_inline_mode;
 	sq->hw_mtu    = MLX5E_SW2HW_MTU(params, params->sw_mtu);
-	sq->max_sq_wqebbs = mlx5e_get_max_sq_wqebbs(mdev);
-	sq->max_sq_mpw_wqebbs = mlx5e_get_sw_max_sq_mpw_wqebbs(sq->max_sq_wqebbs);
+	sq->max_sq_mpw_wqebbs =
+		mlx5e_get_sw_max_sq_mpw_wqebbs(mlx5e_get_max_sq_wqebbs(mdev));
 	INIT_WORK(&sq->recover_work, mlx5e_tx_err_cqe_work);
 	if (!MLX5_CAP_ETH(mdev, wqe_vlan_insert))
 		set_bit(MLX5E_SQ_STATE_VLAN_NEED_L2_INLINE, &sq->state);