Commit 667680f6 authored by Priyanka Jain's avatar Priyanka Jain Committed by Scott Wood

powerpc/fsl-booke: Add initial T1042RDB_PI board support

T1042RDB_PI is Freescale Reference Design Board supporting the T1042
QorIQ Power Architecture processor. T1042 is a reduced personality
of T1040 SoC without Integrated 8-port Gigabit. The board is designed
with low power features targeted for Printing Image Market.

T1042RDB_PI is  similar to T1040RDB board with few differences like
it has video interface, supports T1042 personality only

T1042RDB_PI board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
    	- PCI
    	- SATA 2.0
- DDR Controller
    	- Supports rates of up to 1600 MHz data-rate
    	- Supports one DDR3LP UDIMM
-IFC/Local Bus
    	- NAND flash: 1GB 8-bit NAND flash
    	- NOR: 128MB 16-bit NOR Flash
- Ethernet
    	- Two on-board RGMII 10/100/1G ethernet ports.
    	- PHY #0 remains powered up during deep-sleep
- CPLD
- Clocks
    	- System and DDR clock (SYSCLK, “DDRCLK”)
    	- SERDES clocks
- Power Supplies
- USB
    	- Supports two USB 2.0 ports with integrated PHYs
    	- Two type A ports with 5V@1.5A per port.
- SDHC
    	- SDHC/SDXC connector
- SPI
    	- On-board 64MB SPI flash
- I2C
    	- Device connected: EEPROM, thermal monitor, VID controller, RTC
- Other IO
    	- Two Serial ports
    	- ProfiBus port

Add support for T1042RDB_PI board:
    -add device tree
    -Add entry in corenet_generic.c, as it is similar to other corenet platforms
Signed-off-by: default avatarPoonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: default avatarPriyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
parent 0babcd1c
/*
* T1042RDB_PI Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t104xsi-pre.dtsi"
/include/ "t104xrdb.dtsi"
/ {
model = "fsl,T1042RDB_PI";
compatible = "fsl,T1042RDB_PI";
ifc: localbus@ffe124000 {
cpld@3,0 {
compatible = "fsl,t1042rdb_pi-cpld";
};
};
soc: soc@ffe000000 {
i2c@118000 {
rtc@68 {
compatible = "dallas,ds1337";
reg = <0x68>;
interrupts = <0x2 0x1 0 0>;
};
};
};
};
/include/ "fsl/t1042si-post.dtsi"
......@@ -142,6 +142,7 @@ static const char * const boards[] __initconst = {
"fsl,T1042QDS",
"fsl,T1040RDB",
"fsl,T1042RDB",
"fsl,T1042RDB_PI",
"keymile,kmcoge4",
NULL
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment