Commit 667f39b5 authored by Jonathan Marek's avatar Jonathan Marek Committed by Stephen Boyd

clk: qcom: gcc: fix sm8150 GPU and NPU clocks

Fix the parents and set BRANCH_HALT_SKIP. From the downstream driver it
should be a 500us delay and not skip, however this matches what was done
for other clocks that had 500us delay in downstream.

Fixes: f73a4230 ("clk: qcom: gcc: Add GPU and NPU clocks for SM8150")
Signed-off-by: default avatarJonathan Marek <jonathan@marek.ca>
Tested-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200709135251.643-2-jonathan@marek.caSigned-off-by: default avatarStephen Boyd <sboyd@kernel.org>
parent ba937f51
......@@ -1617,6 +1617,7 @@ static struct clk_branch gcc_gpu_cfg_ahb_clk = {
};
static struct clk_branch gcc_gpu_gpll0_clk_src = {
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52004,
.enable_mask = BIT(15),
......@@ -1632,13 +1633,14 @@ static struct clk_branch gcc_gpu_gpll0_clk_src = {
};
static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52004,
.enable_mask = BIT(16),
.hw.init = &(struct clk_init_data){
.name = "gcc_gpu_gpll0_div_clk_src",
.parent_hws = (const struct clk_hw *[]){
&gcc_gpu_gpll0_clk_src.clkr.hw },
&gpll0_out_even.clkr.hw },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
......@@ -1729,6 +1731,7 @@ static struct clk_branch gcc_npu_cfg_ahb_clk = {
};
static struct clk_branch gcc_npu_gpll0_clk_src = {
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52004,
.enable_mask = BIT(18),
......@@ -1744,13 +1747,14 @@ static struct clk_branch gcc_npu_gpll0_clk_src = {
};
static struct clk_branch gcc_npu_gpll0_div_clk_src = {
.halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x52004,
.enable_mask = BIT(19),
.hw.init = &(struct clk_init_data){
.name = "gcc_npu_gpll0_div_clk_src",
.parent_hws = (const struct clk_hw *[]){
&gcc_npu_gpll0_clk_src.clkr.hw },
&gpll0_out_even.clkr.hw },
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
.ops = &clk_branch2_ops,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment