Skip to content

L
linux
Commit 66bc4a6f authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (53 commits)
  m68knommu: Make PAGE_SIZE available to assembly files.
  m68knommu: fix ColdFire definition of CLOCK_TICK_RATE
  m68knommu: set multi-function pins for ethernet when enabled
  m68knommu: remove special interrupt handling code for ne2k support
  m68knommu: relax IO_SPACE_LIMIT setting
  m68knommu: remove ColdFire direct interrupt register access
  m68knommu: create a speciailized ColdFire 5272 interrupt controller
  m68knommu: add support for second interrupt controller of ColdFire 5249
  m68knommu: clean up old ColdFire timer irq setup
  m68knommu: map ColdFire interrupts to correct masking bits
  m68knommu: clean up ColdFire 532x CPU timer setup
  m68knommu: simplify ColdFire "timers" clock initialization
  m68knommu: support code to mask external interrupts on old ColdFire CPU's
  m68knommu: merge old ColdFire interrupt controller masking macros
  m68knommu: remove duplicate ColdFire mcf_autovector() code
  m68knommu: move ColdFire INTC definitions to new include file
  m68knommu: mask off all interrupts in ColdFire intc-simr controller
  m68knommu: remove timer device interrupt setup for ColdFire 532x
  m68knommu: remove interrupt masking from ColdFire pit timer
  m68knommu: remove unecessary interrupt level setting in ColdFire 520x setup
  ...
parents 96c015b7 2985709d
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5202 additions and 2309 deletions
arch/m68k/include/asm/checksum.h
View file @ 66bc4a6f
#ifdef __uClinux__ #ifndef _M68K_CHECKSUM_H
#include "checksum_no.h" #define _M68K_CHECKSUM_H
#include <linux/in6.h>
/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
*
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
*
* this function must be called with even lengths, except
* for the last fragment, which may be odd
*
* it's best to have buff aligned on a 32-bit boundary
*/
__wsum csum_partial(const void *buff, int len, __wsum sum);
/*
* the same as csum_partial, but copies from src while it
* checksums
*
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
extern __wsum csum_partial_copy_from_user(const void __user *src,
void *dst,
int len, __wsum sum,
int *csum_err);
extern __wsum csum_partial_copy_nocheck(const void *src,
void *dst, int len,
__wsum sum);
#ifdef CONFIG_COLDFIRE
/*
* The ColdFire cores don't support all the 68k instructions used
* in the optimized checksum code below. So it reverts back to using
* more standard C coded checksums. The fast checksum code is
* significantly larger than the optimized version, so it is not
* inlined here.
*/
__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
static inline __sum16 csum_fold(__wsum sum)
{
unsigned int tmp = (__force u32)sum;
tmp = (tmp & 0xffff) + (tmp >> 16);
tmp = (tmp & 0xffff) + (tmp >> 16);
return (__force __sum16)~tmp;
}
#else #else
#include "checksum_mm.h"
#endif /*
* This is a version of ip_fast_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
*/
static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{
unsigned int sum = 0;
unsigned long tmp;
__asm__ ("subqw #1,%2\n"
"1:\t"
"movel %1@+,%3\n\t"
"addxl %3,%0\n\t"
"dbra %2,1b\n\t"
"movel %0,%3\n\t"
"swap %3\n\t"
"addxw %3,%0\n\t"
"clrw %3\n\t"
"addxw %3,%0\n\t"
: "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
: "0" (sum), "1" (iph), "2" (ihl)
: "memory");
return (__force __sum16)~sum;
}
static inline __sum16 csum_fold(__wsum sum)
{
unsigned int tmp = (__force u32)sum;
__asm__("swap %1\n\t"
"addw %1, %0\n\t"
"clrw %1\n\t"
"addxw %1, %0"
: "=&d" (sum), "=&d" (tmp)
: "0" (sum), "1" (tmp));
return (__force __sum16)~sum;
}
#endif /* CONFIG_COLDFIRE */
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
__asm__ ("addl %2,%0\n\t"
"addxl %3,%0\n\t"
"addxl %4,%0\n\t"
"clrl %1\n\t"
"addxl %1,%0"
: "=&d" (sum), "=d" (saddr)
: "g" (daddr), "1" (saddr), "d" (len + proto),
"0" (sum));
return sum;
}
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
static inline __sum16
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
}
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
static inline __sum16 ip_compute_csum(const void *buff, int len)
{
return csum_fold (csum_partial(buff, len, 0));
}
#define _HAVE_ARCH_IPV6_CSUM
static __inline__ __sum16
csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
__u32 len, unsigned short proto, __wsum sum)
{
register unsigned long tmp;
__asm__("addl %2@,%0\n\t"
"movel %2@(4),%1\n\t"
"addxl %1,%0\n\t"
"movel %2@(8),%1\n\t"
"addxl %1,%0\n\t"
"movel %2@(12),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@,%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(4),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(8),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(12),%1\n\t"
"addxl %1,%0\n\t"
"addxl %4,%0\n\t"
"clrl %1\n\t"
"addxl %1,%0"
: "=&d" (sum), "=&d" (tmp)
: "a" (saddr), "a" (daddr), "d" (len + proto),
"0" (sum));
return csum_fold(sum);
}
#endif /* _M68K_CHECKSUM_H */
arch/m68k/include/asm/checksum_mm.h deleted 100644 → 0
View file @ 96c015b7
#ifndef _M68K_CHECKSUM_H
#define _M68K_CHECKSUM_H
#include <linux/in6.h>
/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
*
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
*
* this function must be called with even lengths, except
* for the last fragment, which may be odd
*
* it's best to have buff aligned on a 32-bit boundary
*/
__wsum csum_partial(const void *buff, int len, __wsum sum);
/*
* the same as csum_partial, but copies from src while it
* checksums
*
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
extern __wsum csum_partial_copy_from_user(const void __user *src,
void *dst,
int len, __wsum sum,
int *csum_err);
extern __wsum csum_partial_copy_nocheck(const void *src,
void *dst, int len,
__wsum sum);
/*
* This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
*
*/
static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{
unsigned int sum = 0;
unsigned long tmp;
__asm__ ("subqw #1,%2\n"
"1:\t"
"movel %1@+,%3\n\t"
"addxl %3,%0\n\t"
"dbra %2,1b\n\t"
"movel %0,%3\n\t"
"swap %3\n\t"
"addxw %3,%0\n\t"
"clrw %3\n\t"
"addxw %3,%0\n\t"
: "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
: "0" (sum), "1" (iph), "2" (ihl)
: "memory");
return (__force __sum16)~sum;
}
/*
* Fold a partial checksum
*/
static inline __sum16 csum_fold(__wsum sum)
{
unsigned int tmp = (__force u32)sum;
__asm__("swap %1\n\t"
"addw %1, %0\n\t"
"clrw %1\n\t"
"addxw %1, %0"
: "=&d" (sum), "=&d" (tmp)
: "0" (sum), "1" (tmp));
return (__force __sum16)~sum;
}
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
__asm__ ("addl %2,%0\n\t"
"addxl %3,%0\n\t"
"addxl %4,%0\n\t"
"clrl %1\n\t"
"addxl %1,%0"
: "=&d" (sum), "=d" (saddr)
: "g" (daddr), "1" (saddr), "d" (len + proto),
"0" (sum));
return sum;
}
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
static inline __sum16
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
}
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
static inline __sum16 ip_compute_csum(const void *buff, int len)
{
return csum_fold (csum_partial(buff, len, 0));
}
#define _HAVE_ARCH_IPV6_CSUM
static __inline__ __sum16
csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
__u32 len, unsigned short proto, __wsum sum)
{
register unsigned long tmp;
__asm__("addl %2@,%0\n\t"
"movel %2@(4),%1\n\t"
"addxl %1,%0\n\t"
"movel %2@(8),%1\n\t"
"addxl %1,%0\n\t"
"movel %2@(12),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@,%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(4),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(8),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(12),%1\n\t"
"addxl %1,%0\n\t"
"addxl %4,%0\n\t"
"clrl %1\n\t"
"addxl %1,%0"
: "=&d" (sum), "=&d" (tmp)
: "a" (saddr), "a" (daddr), "d" (len + proto),
"0" (sum));
return csum_fold(sum);
}
#endif /* _M68K_CHECKSUM_H */
arch/m68k/include/asm/checksum_no.h deleted 100644 → 0
View file @ 96c015b7
#ifndef _M68K_CHECKSUM_H
#define _M68K_CHECKSUM_H
#include <linux/in6.h>
/*
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
*
* returns a 32-bit number suitable for feeding into itself
* or csum_tcpudp_magic
*
* this function must be called with even lengths, except
* for the last fragment, which may be odd
*
* it's best to have buff aligned on a 32-bit boundary
*/
__wsum csum_partial(const void *buff, int len, __wsum sum);
/*
* the same as csum_partial, but copies from src while it
* checksums
*
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
__wsum csum_partial_copy_nocheck(const void *src, void *dst,
int len, __wsum sum);
/*
* the same as csum_partial_copy, but copies from user space.
*
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
extern __wsum csum_partial_copy_from_user(const void __user *src,
void *dst, int len, __wsum sum, int *csum_err);
__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
/*
* Fold a partial checksum
*/
static inline __sum16 csum_fold(__wsum sum)
{
unsigned int tmp = (__force u32)sum;
#ifdef CONFIG_COLDFIRE
tmp = (tmp & 0xffff) + (tmp >> 16);
tmp = (tmp & 0xffff) + (tmp >> 16);
return (__force __sum16)~tmp;
#else
__asm__("swap %1\n\t"
"addw %1, %0\n\t"
"clrw %1\n\t"
"addxw %1, %0"
: "=&d" (sum), "=&d" (tmp)
: "0" (sum), "1" (sum));
return (__force __sum16)~sum;
#endif
}
/*
* computes the checksum of the TCP/UDP pseudo-header
* returns a 16-bit checksum, already complemented
*/
static inline __wsum
csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
__asm__ ("addl %1,%0\n\t"
"addxl %4,%0\n\t"
"addxl %5,%0\n\t"
"clrl %1\n\t"
"addxl %1,%0"
: "=&d" (sum), "=&d" (saddr)
: "0" (daddr), "1" (saddr), "d" (len + proto),
"d"(sum));
return sum;
}
static inline __sum16
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
}
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
extern __sum16 ip_compute_csum(const void *buff, int len);
#define _HAVE_ARCH_IPV6_CSUM
static __inline__ __sum16
csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
__u32 len, unsigned short proto, __wsum sum)
{
register unsigned long tmp;
__asm__("addl %2@,%0\n\t"
"movel %2@(4),%1\n\t"
"addxl %1,%0\n\t"
"movel %2@(8),%1\n\t"
"addxl %1,%0\n\t"
"movel %2@(12),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@,%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(4),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(8),%1\n\t"
"addxl %1,%0\n\t"
"movel %3@(12),%1\n\t"
"addxl %1,%0\n\t"
"addxl %4,%0\n\t"
"clrl %1\n\t"
"addxl %1,%0"
: "=&d" (sum), "=&d" (tmp)
: "a" (saddr), "a" (daddr), "d" (len + proto),
"0" (sum));
return csum_fold(sum);
}
#endif /* _M68K_CHECKSUM_H */
arch/m68k/include/asm/dma.h
View file @ 66bc4a6f
This diff is collapsed.
arch/m68k/include/asm/dma_mm.h deleted 100644 → 0
View file @ 96c015b7
#ifndef _M68K_DMA_H
#define _M68K_DMA_H 1
/* it's useless on the m68k, but unfortunately needed by the new
bootmem allocator (but this should do it for this) */
#define MAX_DMA_ADDRESS PAGE_OFFSET
#define MAX_DMA_CHANNELS 8
extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
extern void free_dma(unsigned int dmanr); /* release it again */
#define isa_dma_bridge_buggy (0)
#endif /* _M68K_DMA_H */
arch/m68k/include/asm/dma_no.h deleted 100644 → 0
View file @ 96c015b7
This diff is collapsed.
arch/m68k/include/asm/elia.h deleted 100644 → 0
View file @ 96c015b7
/****************************************************************************/
/*
* elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
*
* (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
* (C) Copyright 1999-2000, Lineo (www.lineo.com)
*/
/****************************************************************************/
#ifndef elia_h
#define elia_h
/****************************************************************************/
#include <asm/coldfire.h>
#ifdef CONFIG_eLIA
/*
* The serial port DTR and DCD lines are also on the Parallel I/O
* as well, so define those too.
*/
#define eLIA_DCD1 0x0001
#define eLIA_DCD0 0x0002
#define eLIA_DTR1 0x0004
#define eLIA_DTR0 0x0008
#define eLIA_PCIRESET 0x0020
/*
* Kernel macros to set and unset the LEDs.
*/
#ifndef __ASSEMBLY__
extern unsigned short ppdata;
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_eLIA */
/****************************************************************************/
#endif /* elia_h */
arch/m68k/include/asm/gpio.h 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO support
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef coldfire_gpio_h
#define coldfire_gpio_h
#include <linux/io.h>
#include <asm-generic/gpio.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
/*
* The Freescale Coldfire family is quite varied in how they implement GPIO.
* Some parts have 8 bit ports, some have 16bit and some have 32bit; some have
* only one port, others have multiple ports; some have a single data latch
* for both input and output, others have a separate pin data register to read
* input; some require a read-modify-write access to change an output, others
* have set and clear registers for some of the outputs; Some have all the
* GPIOs in a single control area, others have some GPIOs implemented in
* different modules.
*
* This implementation attempts accomodate the differences while presenting
* a generic interface that will optimize to as few instructions as possible.
*/
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
/* These parts have GPIO organized by 8 bit ports */
#define MCFGPIO_PORTTYPE u8
#define MCFGPIO_PORTSIZE 8
#define mcfgpio_read(port) __raw_readb(port)
#define mcfgpio_write(data, port) __raw_writeb(data, port)
#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272)
/* These parts have GPIO organized by 16 bit ports */
#define MCFGPIO_PORTTYPE u16
#define MCFGPIO_PORTSIZE 16
#define mcfgpio_read(port) __raw_readw(port)
#define mcfgpio_write(data, port) __raw_writew(data, port)
#elif defined(CONFIG_M5249)
/* These parts have GPIO organized by 32 bit ports */
#define MCFGPIO_PORTTYPE u32
#define MCFGPIO_PORTSIZE 32
#define mcfgpio_read(port) __raw_readl(port)
#define mcfgpio_write(data, port) __raw_writel(data, port)
#endif
#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE))
#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE)
#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
/*
* These parts have an 'Edge' Port module (external interrupt/GPIO) which uses
* read-modify-write to change an output and a GPIO module which has separate
* set/clr registers to directly change outputs with a single write access.
*/
#if defined(CONFIG_M528x)
/*
* The 528x also has GPIOs in other modules (GPT, QADC) which use
* read-modify-write as well as those controlled by the EPORT and GPIO modules.
*/
#define MCFGPIO_SCR_START 40
#else
#define MCFGPIO_SCR_START 8
#endif
#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \
mcfgpio_port(gpio - MCFGPIO_SCR_START))
#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \
mcfgpio_port(gpio - MCFGPIO_SCR_START))
#else
#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX
/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */
#define MCFGPIO_SETR_PORT(gpio) 0
#define MCFGPIO_CLRR_PORT(gpio) 0
#endif
/*
* Coldfire specific helper functions
*/
/* return the port pin data register for a gpio */
static inline u32 __mcf_gpio_ppdr(unsigned gpio)
{
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
return MCFSIM_PADAT;
#elif defined(CONFIG_M5272)
if (gpio < 16)
return MCFSIM_PADAT;
else if (gpio < 32)
return MCFSIM_PBDAT;
else
return MCFSIM_PCDAT;
#elif defined(CONFIG_M5249)
if (gpio < 32)
return MCFSIM2_GPIOREAD;
else
return MCFSIM2_GPIO1READ;
#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
if (gpio < 8)
return MCFEPORT_EPPDR;
#if defined(CONFIG_M528x)
else if (gpio < 16)
return MCFGPTA_GPTPORT;
else if (gpio < 24)
return MCFGPTB_GPTPORT;
else if (gpio < 32)
return MCFQADC_PORTQA;
else if (gpio < 40)
return MCFQADC_PORTQB;
#endif
else
return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
#endif
}
/* return the port output data register for a gpio */
static inline u32 __mcf_gpio_podr(unsigned gpio)
{
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
defined(CONFIG_M5307) || defined(CONFIG_M5407)
return MCFSIM_PADAT;
#elif defined(CONFIG_M5272)
if (gpio < 16)
return MCFSIM_PADAT;
else if (gpio < 32)
return MCFSIM_PBDAT;
else
return MCFSIM_PCDAT;
#elif defined(CONFIG_M5249)
if (gpio < 32)
return MCFSIM2_GPIOWRITE;
else
return MCFSIM2_GPIO1WRITE;
#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \
defined(CONFIG_M527x) || defined(CONFIG_M528x) || defined(CONFIG_M532x)
if (gpio < 8)
return MCFEPORT_EPDR;
#if defined(CONFIG_M528x)
else if (gpio < 16)
return MCFGPTA_GPTPORT;
else if (gpio < 24)
return MCFGPTB_GPTPORT;
else if (gpio < 32)
return MCFQADC_PORTQA;
else if (gpio < 40)
return MCFQADC_PORTQB;
#endif
else
return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START);
#endif
}
/*
* The Generic GPIO functions
*
* If the gpio is a compile time constant and is one of the Coldfire gpios,
* use the inline version, otherwise dispatch thru gpiolib.
*/
static inline int gpio_get_value(unsigned gpio)
{
if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX)
return mcfgpio_read(__mcf_gpio_ppdr(gpio)) & mcfgpio_bit(gpio);
else
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned gpio, int value)
{
if (__builtin_constant_p(gpio) && gpio < MCFGPIO_PIN_MAX) {
if (gpio < MCFGPIO_SCR_START) {
unsigned long flags;
MCFGPIO_PORTTYPE data;
local_irq_save(flags);
data = mcfgpio_read(__mcf_gpio_podr(gpio));
if (value)
data |= mcfgpio_bit(gpio);
else
data &= ~mcfgpio_bit(gpio);
mcfgpio_write(data, __mcf_gpio_podr(gpio));
local_irq_restore(flags);
} else {
if (value)
mcfgpio_write(mcfgpio_bit(gpio),
MCFGPIO_SETR_PORT(gpio));
else
mcfgpio_write(~mcfgpio_bit(gpio),
MCFGPIO_CLRR_PORT(gpio));
}
} else
__gpio_set_value(gpio, value);
}
static inline int gpio_to_irq(unsigned gpio)
{
return (gpio < MCFGPIO_IRQ_MAX) ? gpio + MCFGPIO_IRQ_VECBASE : -EINVAL;
}
static inline int irq_to_gpio(unsigned irq)
{
return (irq >= MCFGPIO_IRQ_VECBASE &&
irq < (MCFGPIO_IRQ_VECBASE + MCFGPIO_IRQ_MAX)) ?
irq - MCFGPIO_IRQ_VECBASE : -ENXIO;
}
static inline int gpio_cansleep(unsigned gpio)
{
return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
}
#endif
arch/m68k/include/asm/hardirq_no.h
View file @ 66bc4a6f
#ifndef __M68K_HARDIRQ_H #ifndef __M68K_HARDIRQ_H
#define __M68K_HARDIRQ_H #define __M68K_HARDIRQ_H
#include <linux/cache.h>
#include <linux/threads.h>
#include <asm/irq.h> #include <asm/irq.h>
typedef struct {
unsigned int __softirq_pending;
} ____cacheline_aligned irq_cpustat_t;
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
#define HARDIRQ_BITS 8 #define HARDIRQ_BITS 8
/* /*
...@@ -22,6 +14,6 @@ typedef struct { ...@@ -22,6 +14,6 @@ typedef struct {
# error HARDIRQ_BITS is too low! # error HARDIRQ_BITS is too low!
#endif #endif
void ack_bad_irq(unsigned int irq); #include <asm-generic/hardirq.h>
#endif /* __M68K_HARDIRQ_H */ #endif /* __M68K_HARDIRQ_H */
arch/m68k/include/asm/io_no.h
View file @ 66bc4a6f
...@@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len) ...@@ -134,7 +134,7 @@ static inline void io_insl(unsigned int addr, void *buf, int len)
#define insw(a,b,l) io_insw(a,b,l) #define insw(a,b,l) io_insw(a,b,l)
#define insl(a,b,l) io_insl(a,b,l) #define insl(a,b,l) io_insl(a,b,l)
#define IO_SPACE_LIMIT 0xffff #define IO_SPACE_LIMIT 0xffffffff
/* Values for nocacheflag and cmode */ /* Values for nocacheflag and cmode */
......
arch/m68k/include/asm/irq.h
View file @ 66bc4a6f
#ifdef __uClinux__ #ifndef _M68K_IRQ_H_
#include "irq_no.h" #define _M68K_IRQ_H_
/*
* This should be the same as the max(NUM_X_SOURCES) for all the
* different m68k hosts compiled into the kernel.
* Currently the Atari has 72 and the Amiga 24, but if both are
* supported in the kernel it is better to make room for 72.
*/
#if defined(CONFIG_COLDFIRE)
#define NR_IRQS 256
#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
#define NR_IRQS 200
#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
#define NR_IRQS 72
#elif defined(CONFIG_Q40)
#define NR_IRQS 43
#elif defined(CONFIG_AMIGA) || !defined(CONFIG_MMU)
#define NR_IRQS 32
#elif defined(CONFIG_APOLLO)
#define NR_IRQS 24
#elif defined(CONFIG_HP300)
#define NR_IRQS 8
#else #else
#include "irq_mm.h" #define NR_IRQS 0
#endif #endif
#ifdef CONFIG_MMU
#include <linux/linkage.h>
#include <linux/hardirq.h>
#include <linux/irqreturn.h>
#include <linux/spinlock_types.h>
/*
* The hardirq mask has to be large enough to have
* space for potentially all IRQ sources in the system
* nesting on a single CPU:
*/
#if (1 << HARDIRQ_BITS) < NR_IRQS
# error HARDIRQ_BITS is too low!
#endif
/*
* Interrupt source definitions
* General interrupt sources are the level 1-7.
* Adding an interrupt service routine for one of these sources
* results in the addition of that routine to a chain of routines.
* Each one is called in succession. Each individual interrupt
* service routine should determine if the device associated with
* that routine requires service.
*/
#define IRQ_SPURIOUS 0
#define IRQ_AUTO_1 1 /* level 1 interrupt */
#define IRQ_AUTO_2 2 /* level 2 interrupt */
#define IRQ_AUTO_3 3 /* level 3 interrupt */
#define IRQ_AUTO_4 4 /* level 4 interrupt */
#define IRQ_AUTO_5 5 /* level 5 interrupt */
#define IRQ_AUTO_6 6 /* level 6 interrupt */
#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
#define IRQ_USER 8
extern unsigned int irq_canonicalize(unsigned int irq);
struct pt_regs;
/*
* various flags for request_irq() - the Amiga now uses the standard
* mechanism like all other architectures - IRQF_DISABLED and
* IRQF_SHARED are your friends.
*/
#ifndef MACH_AMIGA_ONLY
#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
#define IRQ_FLG_FAST (0x0004)
#define IRQ_FLG_SLOW (0x0008)
#define IRQ_FLG_STD (0x8000) /* internally used */
#endif
/*
* This structure is used to chain together the ISRs for a particular
* interrupt source (if it supports chaining).
*/
typedef struct irq_node {
irqreturn_t (*handler)(int, void *);
void *dev_id;
struct irq_node *next;
unsigned long flags;
const char *devname;
} irq_node_t;
/*
* This structure has only 4 elements for speed reasons
*/
struct irq_handler {
int (*handler)(int, void *);
unsigned long flags;
void *dev_id;
const char *devname;
};
struct irq_controller {
const char *name;
spinlock_t lock;
int (*startup)(unsigned int irq);
void (*shutdown)(unsigned int irq);
void (*enable)(unsigned int irq);
void (*disable)(unsigned int irq);
};
extern int m68k_irq_startup(unsigned int);
extern void m68k_irq_shutdown(unsigned int);
/*
* This function returns a new irq_node_t
*/
extern irq_node_t *new_irq_node(void);
extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
void (*handler)(unsigned int, struct pt_regs *));
extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
asmlinkage void m68k_handle_int(unsigned int);
asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
#else
#define irq_canonicalize(irq) (irq)
#endif /* CONFIG_MMU */
#endif /* _M68K_IRQ_H_ */
arch/m68k/include/asm/irq_mm.h deleted 100644 → 0
View file @ 96c015b7
#ifndef _M68K_IRQ_H_
#define _M68K_IRQ_H_
#include <linux/linkage.h>
#include <linux/hardirq.h>
#include <linux/irqreturn.h>
#include <linux/spinlock_types.h>
/*
* This should be the same as the max(NUM_X_SOURCES) for all the
* different m68k hosts compiled into the kernel.
* Currently the Atari has 72 and the Amiga 24, but if both are
* supported in the kernel it is better to make room for 72.
*/
#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
#define NR_IRQS 200
#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
#define NR_IRQS 72
#elif defined(CONFIG_Q40)
#define NR_IRQS 43
#elif defined(CONFIG_AMIGA)
#define NR_IRQS 32
#elif defined(CONFIG_APOLLO)
#define NR_IRQS 24
#elif defined(CONFIG_HP300)
#define NR_IRQS 8
#else
#define NR_IRQS 0
#endif
/*
* The hardirq mask has to be large enough to have
* space for potentially all IRQ sources in the system
* nesting on a single CPU:
*/
#if (1 << HARDIRQ_BITS) < NR_IRQS
# error HARDIRQ_BITS is too low!
#endif
/*
* Interrupt source definitions
* General interrupt sources are the level 1-7.
* Adding an interrupt service routine for one of these sources
* results in the addition of that routine to a chain of routines.
* Each one is called in succession. Each individual interrupt
* service routine should determine if the device associated with
* that routine requires service.
*/
#define IRQ_SPURIOUS 0
#define IRQ_AUTO_1 1 /* level 1 interrupt */
#define IRQ_AUTO_2 2 /* level 2 interrupt */
#define IRQ_AUTO_3 3 /* level 3 interrupt */
#define IRQ_AUTO_4 4 /* level 4 interrupt */
#define IRQ_AUTO_5 5 /* level 5 interrupt */
#define IRQ_AUTO_6 6 /* level 6 interrupt */
#define IRQ_AUTO_7 7 /* level 7 interrupt (non-maskable) */
#define IRQ_USER 8
extern unsigned int irq_canonicalize(unsigned int irq);
struct pt_regs;
/*
* various flags for request_irq() - the Amiga now uses the standard
* mechanism like all other architectures - IRQF_DISABLED and
* IRQF_SHARED are your friends.
*/
#ifndef MACH_AMIGA_ONLY
#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
#define IRQ_FLG_FAST (0x0004)
#define IRQ_FLG_SLOW (0x0008)
#define IRQ_FLG_STD (0x8000) /* internally used */
#endif
/*
* This structure is used to chain together the ISRs for a particular
* interrupt source (if it supports chaining).
*/
typedef struct irq_node {
irqreturn_t (*handler)(int, void *);
void *dev_id;
struct irq_node *next;
unsigned long flags;
const char *devname;
} irq_node_t;
/*
* This structure has only 4 elements for speed reasons
*/
struct irq_handler {
int (*handler)(int, void *);
unsigned long flags;
void *dev_id;
const char *devname;
};
struct irq_controller {
const char *name;
spinlock_t lock;
int (*startup)(unsigned int irq);
void (*shutdown)(unsigned int irq);
void (*enable)(unsigned int irq);
void (*disable)(unsigned int irq);
};
extern int m68k_irq_startup(unsigned int);
extern void m68k_irq_shutdown(unsigned int);
/*
* This function returns a new irq_node_t
*/
extern irq_node_t *new_irq_node(void);
extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
void (*handler)(unsigned int, struct pt_regs *));
extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
asmlinkage void m68k_handle_int(unsigned int);
asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
#endif /* _M68K_IRQ_H_ */
arch/m68k/include/asm/irq_no.h deleted 100644 → 0
View file @ 96c015b7
#ifndef _M68KNOMMU_IRQ_H_
#define _M68KNOMMU_IRQ_H_
#ifdef CONFIG_COLDFIRE
/*
* On the ColdFire we keep track of all vectors. That way drivers
* can register whatever vector number they wish, and we can deal
* with it.
*/
#define SYS_IRQS 256
#define NR_IRQS SYS_IRQS
#else
/*
* # of m68k interrupts
*/
#define SYS_IRQS 8
#define NR_IRQS (24 + SYS_IRQS)
#endif /* CONFIG_COLDFIRE */
#define irq_canonicalize(irq) (irq)
#endif /* _M68KNOMMU_IRQ_H_ */
arch/m68k/include/asm/m5206sim.h
View file @ 66bc4a6f
...@@ -85,8 +85,21 @@ ...@@ -85,8 +85,21 @@
#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ #define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */
#endif #endif
#define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x1c5) /* Parallel Direction (r/w) */
#define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x1c9) /* Parallel Port Value (r/w) */
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/*
* Generic GPIO
*/
#define MCFGPIO_PIN_MAX 8
#define MCFGPIO_IRQ_VECBASE -1
#define MCFGPIO_IRQ_MAX -1
/* /*
* Some symbol defines for the Parallel Port Pin Assignment Register * Some symbol defines for the Parallel Port Pin Assignment Register
...@@ -111,21 +124,5 @@ ...@@ -111,21 +124,5 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */
#endif #endif
#if defined(CONFIG_M5206e)
#define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */
#endif
/*
* Macro to get and set IMR register. It is 16 bits on the 5206.
*/
#define mcf_getimr() \
*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
#define mcf_setimr(imr) \
*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
#define mcf_getipr() \
*((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
/****************************************************************************/ /****************************************************************************/
#endif /* m5206sim_h */ #endif /* m5206sim_h */
arch/m68k/include/asm/m520xsim.h
View file @ 66bc4a6f
...@@ -11,9 +11,8 @@ ...@@ -11,9 +11,8 @@
#define m520xsim_h #define m520xsim_h
/****************************************************************************/ /****************************************************************************/
/* /*
* Define the 5282 SIM register set addresses. * Define the 520x SIM register set addresses.
*/ */
#define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ #define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */
#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
...@@ -22,8 +21,22 @@ ...@@ -22,8 +21,22 @@
#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
#define MCFINTC_SIMR 0x1c /* Set interrupt mask 0-63 */
#define MCFINTC_CIMR 0x1d /* Clear interrupt mask 0-63 */
#define MCFINTC_ICR0 0x40 /* Base ICR register */ #define MCFINTC_ICR0 0x40 /* Base ICR register */
/*
* The common interrupt controller code just wants to know the absolute
* address to the SIMR and CIMR registers (not offsets into IPSBAR).
* The 520x family only has a single INTC unit.
*/
#define MCFINTC0_SIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR)
#define MCFINTC0_CIMR (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR)
#define MCFINTC0_ICR0 (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0)
#define MCFINTC1_SIMR (0)
#define MCFINTC1_CIMR (0)
#define MCFINTC1_ICR0 (0)
#define MCFINT_VECBASE 64 #define MCFINT_VECBASE 64
#define MCFINT_UART0 26 /* Interrupt number for UART0 */ #define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCFINT_UART1 27 /* Interrupt number for UART1 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */
...@@ -41,6 +54,62 @@ ...@@ -41,6 +54,62 @@
#define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */
#define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */
#define MCFEPORT_EPDDR 0xFC088002
#define MCFEPORT_EPDR 0xFC088004
#define MCFEPORT_EPPDR 0xFC088005
#define MCFGPIO_PODR_BUSCTL 0xFC0A4000
#define MCFGPIO_PODR_BE 0xFC0A4001
#define MCFGPIO_PODR_CS 0xFC0A4002
#define MCFGPIO_PODR_FECI2C 0xFC0A4003
#define MCFGPIO_PODR_QSPI 0xFC0A4004
#define MCFGPIO_PODR_TIMER 0xFC0A4005
#define MCFGPIO_PODR_UART 0xFC0A4006
#define MCFGPIO_PODR_FECH 0xFC0A4007
#define MCFGPIO_PODR_FECL 0xFC0A4008
#define MCFGPIO_PDDR_BUSCTL 0xFC0A400C
#define MCFGPIO_PDDR_BE 0xFC0A400D
#define MCFGPIO_PDDR_CS 0xFC0A400E
#define MCFGPIO_PDDR_FECI2C 0xFC0A400F
#define MCFGPIO_PDDR_QSPI 0xFC0A4010
#define MCFGPIO_PDDR_TIMER 0xFC0A4011
#define MCFGPIO_PDDR_UART 0xFC0A4012
#define MCFGPIO_PDDR_FECH 0xFC0A4013
#define MCFGPIO_PDDR_FECL 0xFC0A4014
#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A
#define MCFGPIO_PPDSDR_BE 0xFC0A401B
#define MCFGPIO_PPDSDR_CS 0xFC0A401C
#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D
#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E
#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F
#define MCFGPIO_PPDSDR_UART 0xFC0A4021
#define MCFGPIO_PPDSDR_FECH 0xFC0A4021
#define MCFGPIO_PPDSDR_FECL 0xFC0A4022
#define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024
#define MCFGPIO_PCLRR_BE 0xFC0A4025
#define MCFGPIO_PCLRR_CS 0xFC0A4026
#define MCFGPIO_PCLRR_FECI2C 0xFC0A4027
#define MCFGPIO_PCLRR_QSPI 0xFC0A4028
#define MCFGPIO_PCLRR_TIMER 0xFC0A4029
#define MCFGPIO_PCLRR_UART 0xFC0A402A
#define MCFGPIO_PCLRR_FECH 0xFC0A402B
#define MCFGPIO_PCLRR_FECL 0xFC0A402C
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
#define MCFGPIO_PIN_MAX 80
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/****************************************************************************/
#define MCF_GPIO_PAR_UART (0xA4036) #define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033) #define MCF_GPIO_PAR_FECI2C (0xA4033)
...@@ -55,10 +124,6 @@ ...@@ -55,10 +124,6 @@
#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02)
#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04)
#define ICR_INTRCONF 0x05
#define MCFPIT_IMR MCFINTC_IMRL
#define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1)
/* /*
* Reset Controll Unit. * Reset Controll Unit.
*/ */
......
arch/m68k/include/asm/m523xsim.h
View file @ 66bc4a6f
...@@ -50,5 +50,82 @@ ...@@ -50,5 +50,82 @@
#define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */
#define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003)
#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004)
#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005)
#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006)
#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007)
#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008)
#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009)
#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A)
#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B)
#define MCFGPIO_PODR_ETPU (MCF_IPSBAR + 0x10000C)
#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010)
#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011)
#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012)
#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013)
#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014)
#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015)
#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016)
#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017)
#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018)
#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019)
#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A)
#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B)
#define MCFGPIO_PDDR_ETPU (MCF_IPSBAR + 0x10001C)
#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020)
#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021)
#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022)
#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023)
#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024)
#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025)
#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026)
#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027)
#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028)
#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029)
#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A)
#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B)
#define MCFGPIO_PPDSDR_ETPU (MCF_IPSBAR + 0x10002C)
#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030)
#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031)
#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032)
#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033)
#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034)
#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035)
#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036)
#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037)
#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038)
#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039)
#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A)
#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B)
#define MCFGPIO_PCLRR_ETPU (MCF_IPSBAR + 0x10003C)
/*
* EPort
*/
#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002)
#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004)
#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_ADDR
#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR
#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR
#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR
#define MCFGPIO_PIN_MAX 107
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/****************************************************************************/ /****************************************************************************/
#endif /* m523xsim_h */ #endif /* m523xsim_h */
arch/m68k/include/asm/m5249sim.h
View file @ 66bc4a6f
...@@ -70,17 +70,23 @@ ...@@ -70,17 +70,23 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/* /*
* General purpose IO registers (in MBAR2). * General purpose IO registers (in MBAR2).
*/ */
#define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ #define MCFSIM2_GPIOREAD (MCF_MBAR2 + 0x000) /* GPIO read values */
#define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ #define MCFSIM2_GPIOWRITE (MCF_MBAR2 + 0x004) /* GPIO write values */
#define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ #define MCFSIM2_GPIOENABLE (MCF_MBAR2 + 0x008) /* GPIO enabled */
#define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ #define MCFSIM2_GPIOFUNC (MCF_MBAR2 + 0x00C) /* GPIO function */
#define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ #define MCFSIM2_GPIO1READ (MCF_MBAR2 + 0x0B0) /* GPIO1 read values */
#define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ #define MCFSIM2_GPIO1WRITE (MCF_MBAR2 + 0x0B4) /* GPIO1 write values */
#define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ #define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */
#define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ #define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */
#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ #define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */
#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ #define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */
...@@ -100,20 +106,28 @@ ...@@ -100,20 +106,28 @@
#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ #define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */
#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ #define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */
/* /*
* Macro to set IMR register. It is 32 bits on the 5249. * Define the base interrupt for the second interrupt controller.
* We set it to 128, out of the way of the base interrupts, and plenty
* of room for its 64 interrupts.
*/ */
#define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ #define MCFINTC2_VECBASE 128
#define mcf_getimr() \ #define MCFINTC2_GPIOIRQ0 (MCFINTC2_VECBASE + 32)
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) #define MCFINTC2_GPIOIRQ1 (MCFINTC2_VECBASE + 33)
#define MCFINTC2_GPIOIRQ2 (MCFINTC2_VECBASE + 34)
#define MCFINTC2_GPIOIRQ3 (MCFINTC2_VECBASE + 35)
#define MCFINTC2_GPIOIRQ4 (MCFINTC2_VECBASE + 36)
#define MCFINTC2_GPIOIRQ5 (MCFINTC2_VECBASE + 37)
#define MCFINTC2_GPIOIRQ6 (MCFINTC2_VECBASE + 38)
#define MCFINTC2_GPIOIRQ7 (MCFINTC2_VECBASE + 39)
#define mcf_setimr(imr) \ /*
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); * Generic GPIO support
*/
#define mcf_getipr() \ #define MCFGPIO_PIN_MAX 64
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) #define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1
/****************************************************************************/ /****************************************************************************/
...@@ -137,9 +151,9 @@ ...@@ -137,9 +151,9 @@
subql #1,%a1 /* get MBAR2 address in a1 */ subql #1,%a1 /* get MBAR2 address in a1 */
/* /*
* Move secondary interrupts to base at 128. * Move secondary interrupts to their base (128).
*/ */
moveb #0x80,%d0 moveb #MCFINTC2_VECBASE,%d0
moveb %d0,0x16b(%a1) /* interrupt base register */ moveb %d0,0x16b(%a1) /* interrupt base register */
/* /*
......
arch/m68k/include/asm/m5272sim.h
View file @ 66bc4a6f
...@@ -12,7 +12,6 @@ ...@@ -12,7 +12,6 @@
#define m5272sim_h #define m5272sim_h
/****************************************************************************/ /****************************************************************************/
/* /*
* Define the 5272 SIM register set addresses. * Define the 5272 SIM register set addresses.
*/ */
...@@ -63,16 +62,59 @@ ...@@ -63,16 +62,59 @@
#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */
#define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ #define MCFSIM_PACNT (MCF_MBAR + 0x80) /* Port A Control (r/w) */
#define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x84) /* Port A Direction (r/w) */
#define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x86) /* Port A Data (r/w) */
#define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ #define MCFSIM_PBCNT (MCF_MBAR + 0x88) /* Port B Control (r/w) */
#define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ #define MCFSIM_PBDDR (MCF_MBAR + 0x8c) /* Port B Direction (r/w) */
#define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ #define MCFSIM_PBDAT (MCF_MBAR + 0x8e) /* Port B Data (r/w) */
#define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ #define MCFSIM_PCDDR (MCF_MBAR + 0x94) /* Port C Direction (r/w) */
#define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ #define MCFSIM_PCDAT (MCF_MBAR + 0x96) /* Port C Data (r/w) */
#define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ #define MCFSIM_PDCNT (MCF_MBAR + 0x98) /* Port D Control (r/w) */
/*
* Define system peripheral IRQ usage.
*/
#define MCFINT_VECBASE 64 /* Base of interrupts */
#define MCF_IRQ_SPURIOUS 64 /* User Spurious */
#define MCF_IRQ_EINT1 65 /* External Interrupt 1 */
#define MCF_IRQ_EINT2 66 /* External Interrupt 2 */
#define MCF_IRQ_EINT3 67 /* External Interrupt 3 */
#define MCF_IRQ_EINT4 68 /* External Interrupt 4 */
#define MCF_IRQ_TIMER1 69 /* Timer 1 */
#define MCF_IRQ_TIMER2 70 /* Timer 2 */
#define MCF_IRQ_TIMER3 71 /* Timer 3 */
#define MCF_IRQ_TIMER4 72 /* Timer 4 */
#define MCF_IRQ_UART1 73 /* UART 1 */
#define MCF_IRQ_UART2 74 /* UART 2 */
#define MCF_IRQ_PLIP 75 /* PLIC 2Khz Periodic */
#define MCF_IRQ_PLIA 76 /* PLIC Asynchronous */
#define MCF_IRQ_USB0 77 /* USB Endpoint 0 */
#define MCF_IRQ_USB1 78 /* USB Endpoint 1 */
#define MCF_IRQ_USB2 79 /* USB Endpoint 2 */
#define MCF_IRQ_USB3 80 /* USB Endpoint 3 */
#define MCF_IRQ_USB4 81 /* USB Endpoint 4 */
#define MCF_IRQ_USB5 82 /* USB Endpoint 5 */
#define MCF_IRQ_USB6 83 /* USB Endpoint 6 */
#define MCF_IRQ_USB7 84 /* USB Endpoint 7 */
#define MCF_IRQ_DMA 85 /* DMA Controller */
#define MCF_IRQ_ERX 86 /* Ethernet Receiver */
#define MCF_IRQ_ETX 87 /* Ethernet Transmitter */
#define MCF_IRQ_ENTC 88 /* Ethernet Non-Time Critical */
#define MCF_IRQ_QSPI 89 /* Queued Serial Interface */
#define MCF_IRQ_EINT5 90 /* External Interrupt 5 */
#define MCF_IRQ_EINT6 91 /* External Interrupt 6 */
#define MCF_IRQ_SWTO 92 /* Software Watchdog */
#define MCFINT_VECMAX 95 /* Maxmum interrupt */
#define MCF_IRQ_TIMER MCF_IRQ_TIMER1
#define MCF_IRQ_PROFILER MCF_IRQ_TIMER2
/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 48
#define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1
/****************************************************************************/ /****************************************************************************/
#endif /* m5272sim_h */ #endif /* m5272sim_h */
arch/m68k/include/asm/m527xsim.h
View file @ 66bc4a6f
...@@ -54,6 +54,175 @@ ...@@ -54,6 +54,175 @@
#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
#endif #endif
#ifdef CONFIG_M5271
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100000)
#define MCFGPIO_PODR_DATAH (MCF_IPSBAR + 0x100001)
#define MCFGPIO_PODR_DATAL (MCF_IPSBAR + 0x100002)
#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100003)
#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100004)
#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100005)
#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x100006)
#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x100007)
#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100008)
#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100009)
#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000A)
#define MCFGPIO_PODR_TIMER (MCF_IPSBAR + 0x10000B)
#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100010)
#define MCFGPIO_PDDR_DATAH (MCF_IPSBAR + 0x100011)
#define MCFGPIO_PDDR_DATAL (MCF_IPSBAR + 0x100012)
#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100013)
#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100014)
#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100015)
#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x100016)
#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100017)
#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100018)
#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x100019)
#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x10001A)
#define MCFGPIO_PDDR_TIMER (MCF_IPSBAR + 0x10001B)
#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x100020)
#define MCFGPIO_PPDSDR_DATAH (MCF_IPSBAR + 0x100021)
#define MCFGPIO_PPDSDR_DATAL (MCF_IPSBAR + 0x100022)
#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x100023)
#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x100024)
#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100025)
#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100026)
#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100027)
#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100028)
#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100029)
#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x10002A)
#define MCFGPIO_PPDSDR_TIMER (MCF_IPSBAR + 0x10002B)
#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100030)
#define MCFGPIO_PCLRR_DATAH (MCF_IPSBAR + 0x100031)
#define MCFGPIO_PCLRR_DATAL (MCF_IPSBAR + 0x100032)
#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100033)
#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100034)
#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x100035)
#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100036)
#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100037)
#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x100038)
#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100039)
#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x10003A)
#define MCFGPIO_PCLRR_TIMER (MCF_IPSBAR + 0x10003B)
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_ADDR
#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR
#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR
#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR
#define MCFGPIO_PIN_MAX 100
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
#endif
#ifdef CONFIG_M5275
#define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004)
#define MCFGPIO_PODR_ADDR (MCF_IPSBAR + 0x100005)
#define MCFGPIO_PODR_CS (MCF_IPSBAR + 0x100008)
#define MCFGPIO_PODR_FEC0H (MCF_IPSBAR + 0x10000A)
#define MCFGPIO_PODR_FEC0L (MCF_IPSBAR + 0x10000B)
#define MCFGPIO_PODR_FECI2C (MCF_IPSBAR + 0x10000C)
#define MCFGPIO_PODR_QSPI (MCF_IPSBAR + 0x10000D)
#define MCFGPIO_PODR_SDRAM (MCF_IPSBAR + 0x10000E)
#define MCFGPIO_PODR_TIMERH (MCF_IPSBAR + 0x10000F)
#define MCFGPIO_PODR_TIMERL (MCF_IPSBAR + 0x100010)
#define MCFGPIO_PODR_UARTL (MCF_IPSBAR + 0x100011)
#define MCFGPIO_PODR_FEC1H (MCF_IPSBAR + 0x100012)
#define MCFGPIO_PODR_FEC1L (MCF_IPSBAR + 0x100013)
#define MCFGPIO_PODR_BS (MCF_IPSBAR + 0x100014)
#define MCFGPIO_PODR_IRQ (MCF_IPSBAR + 0x100015)
#define MCFGPIO_PODR_USBH (MCF_IPSBAR + 0x100016)
#define MCFGPIO_PODR_USBL (MCF_IPSBAR + 0x100017)
#define MCFGPIO_PODR_UARTH (MCF_IPSBAR + 0x100018)
#define MCFGPIO_PDDR_BUSCTL (MCF_IPSBAR + 0x100020)
#define MCFGPIO_PDDR_ADDR (MCF_IPSBAR + 0x100021)
#define MCFGPIO_PDDR_CS (MCF_IPSBAR + 0x100024)
#define MCFGPIO_PDDR_FEC0H (MCF_IPSBAR + 0x100026)
#define MCFGPIO_PDDR_FEC0L (MCF_IPSBAR + 0x100027)
#define MCFGPIO_PDDR_FECI2C (MCF_IPSBAR + 0x100028)
#define MCFGPIO_PDDR_QSPI (MCF_IPSBAR + 0x100029)
#define MCFGPIO_PDDR_SDRAM (MCF_IPSBAR + 0x10002A)
#define MCFGPIO_PDDR_TIMERH (MCF_IPSBAR + 0x10002B)
#define MCFGPIO_PDDR_TIMERL (MCF_IPSBAR + 0x10002C)
#define MCFGPIO_PDDR_UARTL (MCF_IPSBAR + 0x10002D)
#define MCFGPIO_PDDR_FEC1H (MCF_IPSBAR + 0x10002E)
#define MCFGPIO_PDDR_FEC1L (MCF_IPSBAR + 0x10002F)
#define MCFGPIO_PDDR_BS (MCF_IPSBAR + 0x100030)
#define MCFGPIO_PDDR_IRQ (MCF_IPSBAR + 0x100031)
#define MCFGPIO_PDDR_USBH (MCF_IPSBAR + 0x100032)
#define MCFGPIO_PDDR_USBL (MCF_IPSBAR + 0x100033)
#define MCFGPIO_PDDR_UARTH (MCF_IPSBAR + 0x100034)
#define MCFGPIO_PPDSDR_BUSCTL (MCF_IPSBAR + 0x10003C)
#define MCFGPIO_PPDSDR_ADDR (MCF_IPSBAR + 0x10003D)
#define MCFGPIO_PPDSDR_CS (MCF_IPSBAR + 0x100040)
#define MCFGPIO_PPDSDR_FEC0H (MCF_IPSBAR + 0x100042)
#define MCFGPIO_PPDSDR_FEC0L (MCF_IPSBAR + 0x100043)
#define MCFGPIO_PPDSDR_FECI2C (MCF_IPSBAR + 0x100044)
#define MCFGPIO_PPDSDR_QSPI (MCF_IPSBAR + 0x100045)
#define MCFGPIO_PPDSDR_SDRAM (MCF_IPSBAR + 0x100046)
#define MCFGPIO_PPDSDR_TIMERH (MCF_IPSBAR + 0x100047)
#define MCFGPIO_PPDSDR_TIMERL (MCF_IPSBAR + 0x100048)
#define MCFGPIO_PPDSDR_UARTL (MCF_IPSBAR + 0x100049)
#define MCFGPIO_PPDSDR_FEC1H (MCF_IPSBAR + 0x10004A)
#define MCFGPIO_PPDSDR_FEC1L (MCF_IPSBAR + 0x10004B)
#define MCFGPIO_PPDSDR_BS (MCF_IPSBAR + 0x10004C)
#define MCFGPIO_PPDSDR_IRQ (MCF_IPSBAR + 0x10004D)
#define MCFGPIO_PPDSDR_USBH (MCF_IPSBAR + 0x10004E)
#define MCFGPIO_PPDSDR_USBL (MCF_IPSBAR + 0x10004F)
#define MCFGPIO_PPDSDR_UARTH (MCF_IPSBAR + 0x100050)
#define MCFGPIO_PCLRR_BUSCTL (MCF_IPSBAR + 0x100058)
#define MCFGPIO_PCLRR_ADDR (MCF_IPSBAR + 0x100059)
#define MCFGPIO_PCLRR_CS (MCF_IPSBAR + 0x10005C)
#define MCFGPIO_PCLRR_FEC0H (MCF_IPSBAR + 0x10005E)
#define MCFGPIO_PCLRR_FEC0L (MCF_IPSBAR + 0x10005F)
#define MCFGPIO_PCLRR_FECI2C (MCF_IPSBAR + 0x100060)
#define MCFGPIO_PCLRR_QSPI (MCF_IPSBAR + 0x100061)
#define MCFGPIO_PCLRR_SDRAM (MCF_IPSBAR + 0x100062)
#define MCFGPIO_PCLRR_TIMERH (MCF_IPSBAR + 0x100063)
#define MCFGPIO_PCLRR_TIMERL (MCF_IPSBAR + 0x100064)
#define MCFGPIO_PCLRR_UARTL (MCF_IPSBAR + 0x100065)
#define MCFGPIO_PCLRR_FEC1H (MCF_IPSBAR + 0x100066)
#define MCFGPIO_PCLRR_FEC1L (MCF_IPSBAR + 0x100067)
#define MCFGPIO_PCLRR_BS (MCF_IPSBAR + 0x100068)
#define MCFGPIO_PCLRR_IRQ (MCF_IPSBAR + 0x100069)
#define MCFGPIO_PCLRR_USBH (MCF_IPSBAR + 0x10006A)
#define MCFGPIO_PCLRR_USBL (MCF_IPSBAR + 0x10006B)
#define MCFGPIO_PCLRR_UARTH (MCF_IPSBAR + 0x10006C)
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL
#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL
#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL
#define MCFGPIO_PIN_MAX 148
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
#endif
/*
* EPort
*/
#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x130002)
#define MCFEPORT_EPDR (MCF_IPSBAR + 0x130004)
#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
/* /*
* GPIO pins setups to enable the UARTs. * GPIO pins setups to enable the UARTs.
*/ */
......
arch/m68k/include/asm/m528xsim.h
View file @ 66bc4a6f
...@@ -40,6 +40,157 @@ ...@@ -40,6 +40,157 @@
#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
/*
* GPIO registers
*/
#define MCFGPIO_PORTA (MCF_IPSBAR + 0x00100000)
#define MCFGPIO_PORTB (MCF_IPSBAR + 0x00100001)
#define MCFGPIO_PORTC (MCF_IPSBAR + 0x00100002)
#define MCFGPIO_PORTD (MCF_IPSBAR + 0x00100003)
#define MCFGPIO_PORTE (MCF_IPSBAR + 0x00100004)
#define MCFGPIO_PORTF (MCF_IPSBAR + 0x00100005)
#define MCFGPIO_PORTG (MCF_IPSBAR + 0x00100006)
#define MCFGPIO_PORTH (MCF_IPSBAR + 0x00100007)
#define MCFGPIO_PORTJ (MCF_IPSBAR + 0x00100008)
#define MCFGPIO_PORTDD (MCF_IPSBAR + 0x00100009)
#define MCFGPIO_PORTEH (MCF_IPSBAR + 0x0010000A)
#define MCFGPIO_PORTEL (MCF_IPSBAR + 0x0010000B)
#define MCFGPIO_PORTAS (MCF_IPSBAR + 0x0010000C)
#define MCFGPIO_PORTQS (MCF_IPSBAR + 0x0010000D)
#define MCFGPIO_PORTSD (MCF_IPSBAR + 0x0010000E)
#define MCFGPIO_PORTTC (MCF_IPSBAR + 0x0010000F)
#define MCFGPIO_PORTTD (MCF_IPSBAR + 0x00100010)
#define MCFGPIO_PORTUA (MCF_IPSBAR + 0x00100011)
#define MCFGPIO_DDRA (MCF_IPSBAR + 0x00100014)
#define MCFGPIO_DDRB (MCF_IPSBAR + 0x00100015)
#define MCFGPIO_DDRC (MCF_IPSBAR + 0x00100016)
#define MCFGPIO_DDRD (MCF_IPSBAR + 0x00100017)
#define MCFGPIO_DDRE (MCF_IPSBAR + 0x00100018)
#define MCFGPIO_DDRF (MCF_IPSBAR + 0x00100019)
#define MCFGPIO_DDRG (MCF_IPSBAR + 0x0010001A)
#define MCFGPIO_DDRH (MCF_IPSBAR + 0x0010001B)
#define MCFGPIO_DDRJ (MCF_IPSBAR + 0x0010001C)
#define MCFGPIO_DDRDD (MCF_IPSBAR + 0x0010001D)
#define MCFGPIO_DDREH (MCF_IPSBAR + 0x0010001E)
#define MCFGPIO_DDREL (MCF_IPSBAR + 0x0010001F)
#define MCFGPIO_DDRAS (MCF_IPSBAR + 0x00100020)
#define MCFGPIO_DDRQS (MCF_IPSBAR + 0x00100021)
#define MCFGPIO_DDRSD (MCF_IPSBAR + 0x00100022)
#define MCFGPIO_DDRTC (MCF_IPSBAR + 0x00100023)
#define MCFGPIO_DDRTD (MCF_IPSBAR + 0x00100024)
#define MCFGPIO_DDRUA (MCF_IPSBAR + 0x00100025)
#define MCFGPIO_PORTAP (MCF_IPSBAR + 0x00100028)
#define MCFGPIO_PORTBP (MCF_IPSBAR + 0x00100029)
#define MCFGPIO_PORTCP (MCF_IPSBAR + 0x0010002A)
#define MCFGPIO_PORTDP (MCF_IPSBAR + 0x0010002B)
#define MCFGPIO_PORTEP (MCF_IPSBAR + 0x0010002C)
#define MCFGPIO_PORTFP (MCF_IPSBAR + 0x0010002D)
#define MCFGPIO_PORTGP (MCF_IPSBAR + 0x0010002E)
#define MCFGPIO_PORTHP (MCF_IPSBAR + 0x0010002F)
#define MCFGPIO_PORTJP (MCF_IPSBAR + 0x00100030)
#define MCFGPIO_PORTDDP (MCF_IPSBAR + 0x00100031)
#define MCFGPIO_PORTEHP (MCF_IPSBAR + 0x00100032)
#define MCFGPIO_PORTELP (MCF_IPSBAR + 0x00100033)
#define MCFGPIO_PORTASP (MCF_IPSBAR + 0x00100034)
#define MCFGPIO_PORTQSP (MCF_IPSBAR + 0x00100035)
#define MCFGPIO_PORTSDP (MCF_IPSBAR + 0x00100036)
#define MCFGPIO_PORTTCP (MCF_IPSBAR + 0x00100037)
#define MCFGPIO_PORTTDP (MCF_IPSBAR + 0x00100038)
#define MCFGPIO_PORTUAP (MCF_IPSBAR + 0x00100039)
#define MCFGPIO_SETA (MCF_IPSBAR + 0x00100028)
#define MCFGPIO_SETB (MCF_IPSBAR + 0x00100029)
#define MCFGPIO_SETC (MCF_IPSBAR + 0x0010002A)
#define MCFGPIO_SETD (MCF_IPSBAR + 0x0010002B)
#define MCFGPIO_SETE (MCF_IPSBAR + 0x0010002C)
#define MCFGPIO_SETF (MCF_IPSBAR + 0x0010002D)
#define MCFGPIO_SETG (MCF_IPSBAR + 0x0010002E)
#define MCFGPIO_SETH (MCF_IPSBAR + 0x0010002F)
#define MCFGPIO_SETJ (MCF_IPSBAR + 0x00100030)
#define MCFGPIO_SETDD (MCF_IPSBAR + 0x00100031)
#define MCFGPIO_SETEH (MCF_IPSBAR + 0x00100032)
#define MCFGPIO_SETEL (MCF_IPSBAR + 0x00100033)
#define MCFGPIO_SETAS (MCF_IPSBAR + 0x00100034)
#define MCFGPIO_SETQS (MCF_IPSBAR + 0x00100035)
#define MCFGPIO_SETSD (MCF_IPSBAR + 0x00100036)
#define MCFGPIO_SETTC (MCF_IPSBAR + 0x00100037)
#define MCFGPIO_SETTD (MCF_IPSBAR + 0x00100038)
#define MCFGPIO_SETUA (MCF_IPSBAR + 0x00100039)
#define MCFGPIO_CLRA (MCF_IPSBAR + 0x0010003C)
#define MCFGPIO_CLRB (MCF_IPSBAR + 0x0010003D)
#define MCFGPIO_CLRC (MCF_IPSBAR + 0x0010003E)
#define MCFGPIO_CLRD (MCF_IPSBAR + 0x0010003F)
#define MCFGPIO_CLRE (MCF_IPSBAR + 0x00100040)
#define MCFGPIO_CLRF (MCF_IPSBAR + 0x00100041)
#define MCFGPIO_CLRG (MCF_IPSBAR + 0x00100042)
#define MCFGPIO_CLRH (MCF_IPSBAR + 0x00100043)
#define MCFGPIO_CLRJ (MCF_IPSBAR + 0x00100044)
#define MCFGPIO_CLRDD (MCF_IPSBAR + 0x00100045)
#define MCFGPIO_CLREH (MCF_IPSBAR + 0x00100046)
#define MCFGPIO_CLREL (MCF_IPSBAR + 0x00100047)
#define MCFGPIO_CLRAS (MCF_IPSBAR + 0x00100048)
#define MCFGPIO_CLRQS (MCF_IPSBAR + 0x00100049)
#define MCFGPIO_CLRSD (MCF_IPSBAR + 0x0010004A)
#define MCFGPIO_CLRTC (MCF_IPSBAR + 0x0010004B)
#define MCFGPIO_CLRTD (MCF_IPSBAR + 0x0010004C)
#define MCFGPIO_CLRUA (MCF_IPSBAR + 0x0010004D)
#define MCFGPIO_PBCDPAR (MCF_IPSBAR + 0x00100050)
#define MCFGPIO_PFPAR (MCF_IPSBAR + 0x00100051)
#define MCFGPIO_PEPAR (MCF_IPSBAR + 0x00100052)
#define MCFGPIO_PJPAR (MCF_IPSBAR + 0x00100054)
#define MCFGPIO_PSDPAR (MCF_IPSBAR + 0x00100055)
#define MCFGPIO_PASPAR (MCF_IPSBAR + 0x00100056)
#define MCFGPIO_PEHLPAR (MCF_IPSBAR + 0x00100058)
#define MCFGPIO_PQSPAR (MCF_IPSBAR + 0x00100059)
#define MCFGPIO_PTCPAR (MCF_IPSBAR + 0x0010005A)
#define MCFGPIO_PTDPAR (MCF_IPSBAR + 0x0010005B)
#define MCFGPIO_PUAPAR (MCF_IPSBAR + 0x0010005C)
/*
* Edge Port registers
*/
#define MCFEPORT_EPPAR (MCF_IPSBAR + 0x00130000)
#define MCFEPORT_EPDDR (MCF_IPSBAR + 0x00130002)
#define MCFEPORT_EPIER (MCF_IPSBAR + 0x00130003)
#define MCFEPORT_EPDR (MCF_IPSBAR + 0x00130004)
#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x00130005)
#define MCFEPORT_EPFR (MCF_IPSBAR + 0x00130006)
/*
* Queued ADC registers
*/
#define MCFQADC_PORTQA (MCF_IPSBAR + 0x00190006)
#define MCFQADC_PORTQB (MCF_IPSBAR + 0x00190007)
#define MCFQADC_DDRQA (MCF_IPSBAR + 0x00190008)
#define MCFQADC_DDRQB (MCF_IPSBAR + 0x00190009)
/*
* General Purpose Timers registers
*/
#define MCFGPTA_GPTPORT (MCF_IPSBAR + 0x001A001D)
#define MCFGPTA_GPTDDR (MCF_IPSBAR + 0x001A001E)
#define MCFGPTB_GPTPORT (MCF_IPSBAR + 0x001B001D)
#define MCFGPTB_GPTDDR (MCF_IPSBAR + 0x001B001E)
/*
*
* definitions for generic gpio support
*
*/
#define MCFGPIO_PODR MCFGPIO_PORTA /* port output data */
#define MCFGPIO_PDDR MCFGPIO_DDRA /* port data direction */
#define MCFGPIO_PPDR MCFGPIO_PORTAP /* port pin data */
#define MCFGPIO_SETR MCFGPIO_SETA /* set output */
#define MCFGPIO_CLRR MCFGPIO_CLRA /* clr output */
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
#define MCFGPIO_PIN_MAX 180
/* /*
* Derek Cheung - 6 Feb 2005 * Derek Cheung - 6 Feb 2005
* add I2C and QSPI register definition using Freescale's MCF5282 * add I2C and QSPI register definition using Freescale's MCF5282
......
arch/m68k/include/asm/m5307sim.h
View file @ 66bc4a6f
...@@ -90,8 +90,15 @@ ...@@ -90,8 +90,15 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 16
#define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1
/* Definition offset address for CS2-7 -- old mask 5307 */ /* Definition offset address for CS2-7 -- old mask 5307 */
...@@ -117,22 +124,6 @@ ...@@ -117,22 +124,6 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
#if defined(CONFIG_M5307)
#define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */
#endif
/*
* Macro to set IMR register. It is 32 bits on the 5307.
*/
#define mcf_getimr() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
#define mcf_setimr(imr) \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
#define mcf_getipr() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
/* /*
* Some symbol defines for the Parallel Port Pin Assignment Register * Some symbol defines for the Parallel Port Pin Assignment Register
...@@ -149,6 +140,11 @@ ...@@ -149,6 +140,11 @@
#define IRQ3_LEVEL6 0x40 #define IRQ3_LEVEL6 0x40
#define IRQ1_LEVEL2 0x20 #define IRQ1_LEVEL2 0x20
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/* /*
* Define the Cache register flags. * Define the Cache register flags.
......
arch/m68k/include/asm/m532xsim.h
View file @ 66bc4a6f
...@@ -56,47 +56,21 @@ ...@@ -56,47 +56,21 @@
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
#define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ #define MCFINTC0_SIMR 0xFC04801C
#define MCFINTC0_CIMR 0xFC04801D
#define MCFSIM_IMR_SIMR0 0xFC04801C #define MCFINTC0_ICR0 0xFC048040
#define MCFSIM_IMR_SIMR1 0xFC04C01C #define MCFINTC1_SIMR 0xFC04C01C
#define MCFSIM_IMR_CIMR0 0xFC04801D #define MCFINTC1_CIMR 0xFC04C01D
#define MCFSIM_IMR_CIMR1 0xFC04C01D #define MCFINTC1_ICR0 0xFC04C040
#define MCFSIM_ICR_TIMER1 (0xFC048040+32) #define MCFSIM_ICR_TIMER1 (0xFC048040+32)
#define MCFSIM_ICR_TIMER2 (0xFC048040+33) #define MCFSIM_ICR_TIMER2 (0xFC048040+33)
/* /*
* Macro to set IMR register. It is 32 bits on the 5307. * Define system peripheral IRQ usage.
*/ */
#define mcf_getimr() \ #define MCF_IRQ_TIMER (64 + 32) /* Timer0 */
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) #define MCF_IRQ_PROFILER (64 + 33) /* Timer1 */
#define mcf_setimr(imr) \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
#define mcf_getipr() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
#define mcf_getiprl() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
#define mcf_getiprh() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
#define mcf_enable_irq0(irq) \
*((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
#define mcf_enable_irq1(irq) \
*((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
#define mcf_disable_irq0(irq) \
*((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
#define mcf_disable_irq1(irq) \
*((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
/* /*
* Define the Cache register flags. * Define the Cache register flags.
...@@ -422,70 +396,70 @@ ...@@ -422,70 +396,70 @@
*********************************************************************/ *********************************************************************/
/* Register read/write macros */ /* Register read/write macros */
#define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) #define MCFGPIO_PODR_FECH (0xFC0A4000)
#define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) #define MCFGPIO_PODR_FECL (0xFC0A4001)
#define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) #define MCFGPIO_PODR_SSI (0xFC0A4002)
#define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) #define MCFGPIO_PODR_BUSCTL (0xFC0A4003)
#define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) #define MCFGPIO_PODR_BE (0xFC0A4004)
#define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) #define MCFGPIO_PODR_CS (0xFC0A4005)
#define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) #define MCFGPIO_PODR_PWM (0xFC0A4006)
#define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) #define MCFGPIO_PODR_FECI2C (0xFC0A4007)
#define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) #define MCFGPIO_PODR_UART (0xFC0A4009)
#define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) #define MCFGPIO_PODR_QSPI (0xFC0A400A)
#define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) #define MCFGPIO_PODR_TIMER (0xFC0A400B)
#define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) #define MCFGPIO_PODR_LCDDATAH (0xFC0A400D)
#define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) #define MCFGPIO_PODR_LCDDATAM (0xFC0A400E)
#define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) #define MCFGPIO_PODR_LCDDATAL (0xFC0A400F)
#define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) #define MCFGPIO_PODR_LCDCTLH (0xFC0A4010)
#define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) #define MCFGPIO_PODR_LCDCTLL (0xFC0A4011)
#define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) #define MCFGPIO_PDDR_FECH (0xFC0A4014)
#define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) #define MCFGPIO_PDDR_FECL (0xFC0A4015)
#define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) #define MCFGPIO_PDDR_SSI (0xFC0A4016)
#define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) #define MCFGPIO_PDDR_BUSCTL (0xFC0A4017)
#define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) #define MCFGPIO_PDDR_BE (0xFC0A4018)
#define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) #define MCFGPIO_PDDR_CS (0xFC0A4019)
#define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) #define MCFGPIO_PDDR_PWM (0xFC0A401A)
#define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) #define MCFGPIO_PDDR_FECI2C (0xFC0A401B)
#define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) #define MCFGPIO_PDDR_UART (0xFC0A401C)
#define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) #define MCFGPIO_PDDR_QSPI (0xFC0A401E)
#define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) #define MCFGPIO_PDDR_TIMER (0xFC0A401F)
#define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) #define MCFGPIO_PDDR_LCDDATAH (0xFC0A4021)
#define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) #define MCFGPIO_PDDR_LCDDATAM (0xFC0A4022)
#define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) #define MCFGPIO_PDDR_LCDDATAL (0xFC0A4023)
#define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) #define MCFGPIO_PDDR_LCDCTLH (0xFC0A4024)
#define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) #define MCFGPIO_PDDR_LCDCTLL (0xFC0A4025)
#define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) #define MCFGPIO_PPDSDR_FECH (0xFC0A4028)
#define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) #define MCFGPIO_PPDSDR_FECL (0xFC0A4029)
#define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) #define MCFGPIO_PPDSDR_SSI (0xFC0A402A)
#define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) #define MCFGPIO_PPDSDR_BUSCTL (0xFC0A402B)
#define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) #define MCFGPIO_PPDSDR_BE (0xFC0A402C)
#define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) #define MCFGPIO_PPDSDR_CS (0xFC0A402D)
#define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) #define MCFGPIO_PPDSDR_PWM (0xFC0A402E)
#define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) #define MCFGPIO_PPDSDR_FECI2C (0xFC0A402F)
#define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) #define MCFGPIO_PPDSDR_UART (0xFC0A4031)
#define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) #define MCFGPIO_PPDSDR_QSPI (0xFC0A4032)
#define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) #define MCFGPIO_PPDSDR_TIMER (0xFC0A4033)
#define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) #define MCFGPIO_PPDSDR_LCDDATAH (0xFC0A4035)
#define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) #define MCFGPIO_PPDSDR_LCDDATAM (0xFC0A4036)
#define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) #define MCFGPIO_PPDSDR_LCDDATAL (0xFC0A4037)
#define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) #define MCFGPIO_PPDSDR_LCDCTLH (0xFC0A4038)
#define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) #define MCFGPIO_PPDSDR_LCDCTLL (0xFC0A4039)
#define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) #define MCFGPIO_PCLRR_FECH (0xFC0A403C)
#define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) #define MCFGPIO_PCLRR_FECL (0xFC0A403D)
#define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) #define MCFGPIO_PCLRR_SSI (0xFC0A403E)
#define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) #define MCFGPIO_PCLRR_BUSCTL (0xFC0A403F)
#define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) #define MCFGPIO_PCLRR_BE (0xFC0A4040)
#define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) #define MCFGPIO_PCLRR_CS (0xFC0A4041)
#define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) #define MCFGPIO_PCLRR_PWM (0xFC0A4042)
#define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) #define MCFGPIO_PCLRR_FECI2C (0xFC0A4043)
#define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) #define MCFGPIO_PCLRR_UART (0xFC0A4045)
#define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) #define MCFGPIO_PCLRR_QSPI (0xFC0A4046)
#define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) #define MCFGPIO_PCLRR_TIMER (0xFC0A4047)
#define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) #define MCFGPIO_PCLRR_LCDDATAH (0xFC0A4049)
#define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) #define MCFGPIO_PCLRR_LCDDATAM (0xFC0A404A)
#define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) #define MCFGPIO_PCLRR_LCDDATAL (0xFC0A404B)
#define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) #define MCFGPIO_PCLRR_LCDCTLH (0xFC0A404C)
#define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) #define MCFGPIO_PCLRR_LCDCTLL (0xFC0A404D)
#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) #define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050)
#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) #define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051)
#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) #define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052)
...@@ -1187,6 +1161,20 @@ ...@@ -1187,6 +1161,20 @@
/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ /* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) #define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0)
/*
* Generic GPIO support
*/
#define MCFGPIO_PODR MCFGPIO_PODR_FECH
#define MCFGPIO_PDDR MCFGPIO_PDDR_FECH
#define MCFGPIO_PPDR MCFGPIO_PPDSDR_FECH
#define MCFGPIO_SETR MCFGPIO_PPDSDR_FECH
#define MCFGPIO_CLRR MCFGPIO_PCLRR_FECH
#define MCFGPIO_PIN_MAX 136
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
/********************************************************************* /*********************************************************************
* *
* Interrupt Controller (INTC) * Interrupt Controller (INTC)
...@@ -2154,12 +2142,12 @@ ...@@ -2154,12 +2142,12 @@
*********************************************************************/ *********************************************************************/
/* Register read/write macros */ /* Register read/write macros */
#define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) #define MCFEPORT_EPPAR (0xFC094000)
#define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) #define MCFEPORT_EPDDR (0xFC094002)
#define MCF_EPORT_EPIER MCF_REG08(0xFC094003) #define MCFEPORT_EPIER (0xFC094003)
#define MCF_EPORT_EPDR MCF_REG08(0xFC094004) #define MCFEPORT_EPDR (0xFC094004)
#define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) #define MCFEPORT_EPPDR (0xFC094005)
#define MCF_EPORT_EPFR MCF_REG08(0xFC094006) #define MCFEPORT_EPFR (0xFC094006)
/* Bit definitions and macros for MCF_EPORT_EPPAR */ /* Bit definitions and macros for MCF_EPORT_EPPAR */
#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) #define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2)
......
arch/m68k/include/asm/m5407sim.h
View file @ 66bc4a6f
...@@ -73,9 +73,15 @@ ...@@ -73,9 +73,15 @@
#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */
#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */
#define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ #define MCFSIM_PADDR (MCF_MBAR + 0x244)
#define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ #define MCFSIM_PADAT (MCF_MBAR + 0x248)
/*
* Generic GPIO support
*/
#define MCFGPIO_PIN_MAX 16
#define MCFGPIO_IRQ_MAX -1
#define MCFGPIO_IRQ_VECBASE -1
/* /*
* Some symbol defines for the above... * Some symbol defines for the above...
...@@ -90,19 +96,6 @@ ...@@ -90,19 +96,6 @@
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
/*
* Macro to set IMR register. It is 32 bits on the 5407.
*/
#define mcf_getimr() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
#define mcf_setimr(imr) \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
#define mcf_getipr() \
*((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
/* /*
* Some symbol defines for the Parallel Port Pin Assignment Register * Some symbol defines for the Parallel Port Pin Assignment Register
*/ */
...@@ -118,6 +111,11 @@ ...@@ -118,6 +111,11 @@
#define IRQ3_LEVEL6 0x40 #define IRQ3_LEVEL6 0x40
#define IRQ1_LEVEL2 0x20 #define IRQ1_LEVEL2 0x20
/*
* Define system peripheral IRQ usage.
*/
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
/* /*
* Define the Cache register flags. * Define the Cache register flags.
......
arch/m68k/include/asm/mcfgpio.h 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO support.
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef mcfgpio_h
#define mcfgpio_h
#include <linux/io.h>
#include <asm-generic/gpio.h>
struct mcf_gpio_chip {
struct gpio_chip gpio_chip;
void __iomem *pddr;
void __iomem *podr;
void __iomem *ppdr;
void __iomem *setr;
void __iomem *clrr;
const u8 *gpio_to_pinmux;
};
int mcf_gpio_direction_input(struct gpio_chip *, unsigned);
int mcf_gpio_get_value(struct gpio_chip *, unsigned);
int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int);
void mcf_gpio_set_value(struct gpio_chip *, unsigned, int);
void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
int mcf_gpio_request(struct gpio_chip *, unsigned);
void mcf_gpio_free(struct gpio_chip *, unsigned);
#endif
arch/m68k/include/asm/mcfintc.h 0 → 100644
View file @ 66bc4a6f
/****************************************************************************/
/*
* mcfintc.h -- support definitions for the simple ColdFire
* Interrupt Controller
*
* (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org>
*/
/****************************************************************************/
#ifndef mcfintc_h
#define mcfintc_h
/****************************************************************************/
/*
* Most of the older ColdFire parts use the same simple interrupt
* controller. This is currently used on the 5206, 5206e, 5249, 5307
* and 5407 parts.
*
* The builtin peripherals are masked through dedicated bits in the
* Interrupt Mask register (IMR) - and this is not indexed (or in any way
* related to) the actual interrupt number they use. So knowing the IRQ
* number doesn't explicitly map to a certain internal device for
* interrupt control purposes.
*/
/*
* Bit definitions for the ICR family of registers.
*/
#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
/*
* IMR bit position definitions. Not all ColdFire parts with this interrupt
* controller actually support all of these interrupt sources. But the bit
* numbers are the same in all cores.
*/
#define MCFINTC_EINT1 1 /* External int #1 */
#define MCFINTC_EINT2 2 /* External int #2 */
#define MCFINTC_EINT3 3 /* External int #3 */
#define MCFINTC_EINT4 4 /* External int #4 */
#define MCFINTC_EINT5 5 /* External int #5 */
#define MCFINTC_EINT6 6 /* External int #6 */
#define MCFINTC_EINT7 7 /* External int #7 */
#define MCFINTC_SWT 8 /* Software Watchdog */
#define MCFINTC_TIMER1 9
#define MCFINTC_TIMER2 10
#define MCFINTC_I2C 11 /* I2C / MBUS */
#define MCFINTC_UART0 12
#define MCFINTC_UART1 13
#define MCFINTC_DMA0 14
#define MCFINTC_DMA1 15
#define MCFINTC_DMA2 16
#define MCFINTC_DMA3 17
#define MCFINTC_QSPI 18
#ifndef __ASSEMBLER__
/*
* There is no one-is-one correspondance between the interrupt number (irq)
* and the bit fields on the mask register. So we create a per-cpu type
* mapping of irq to mask bit. The CPU platform code needs to register
* its supported irq's at init time, using this function.
*/
extern unsigned char mcf_irq2imr[];
static inline void mcf_mapirq2imr(int irq, int imr)
{
mcf_irq2imr[irq] = imr;
}
void mcf_autovector(int irq);
void mcf_setimr(int index);
void mcf_clrimr(int index);
#endif
/****************************************************************************/
#endif /* mcfintc_h */
arch/m68k/include/asm/mcfne.h
View file @ 66bc4a6f
...@@ -238,88 +238,5 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) ...@@ -238,88 +238,5 @@ void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
#endif /* COLDFIRE_NE2000_FUNCS */ #endif /* COLDFIRE_NE2000_FUNCS */
#endif /* NE2000_OFFOFFSET */ #endif /* NE2000_OFFOFFSET */
/****************************************************************************/
#ifdef COLDFIRE_NE2000_FUNCS
/*
* Lastly the interrupt set up code...
* Minor differences between the different board types.
*/
#if defined(CONFIG_ARN5206)
void ne2000_irqsetup(int irq)
{
volatile unsigned char *icrp;
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
}
#endif
#if defined(CONFIG_M5206eC3)
void ne2000_irqsetup(int irq)
{
volatile unsigned char *icrp;
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
*icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
}
#endif
#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
void ne2000_irqsetup(int irq)
{
mcf_autovector(irq);
}
#endif
#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
void ne2000_irqsetup(int irq)
{
volatile unsigned long *icrp;
volatile unsigned long *pitr;
/* The NE2000 device uses external IRQ3 */
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = (*icrp & 0x77077777) | 0x00d00000;
pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
*pitr = *pitr | 0x20000000;
}
void ne2000_irqack(int irq)
{
volatile unsigned long *icrp;
/* The NE2000 device uses external IRQ3 */
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = (*icrp & 0x77777777) | 0x00800000;
}
#endif
#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
void ne2000_irqsetup(int irq)
{
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
mcf_autovector(irq);
}
#else
void ne2000_irqsetup(int irq)
{
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
}
#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
#endif /* CONFIG_M5307 || CONFIG_M5407 */
#endif /* COLDFIRE_NE2000_FUNCS */
/****************************************************************************/ /****************************************************************************/
#endif /* mcfne_h */ #endif /* mcfne_h */
arch/m68k/include/asm/mcfsim.h
View file @ 66bc4a6f
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
* mcfsim.h -- ColdFire System Integration Module support. * mcfsim.h -- ColdFire System Integration Module support.
* *
* (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
* (C) Copyright 2000, Lineo Inc. (www.lineo.com) * (C) Copyright 2000, Lineo Inc. (www.lineo.com)
*/ */
/****************************************************************************/ /****************************************************************************/
...@@ -12,19 +12,21 @@ ...@@ -12,19 +12,21 @@
#define mcfsim_h #define mcfsim_h
/****************************************************************************/ /****************************************************************************/
/* /*
* Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, * Include the appropriate ColdFire CPU specific System Integration Module
* 5307 or 5407 specific addresses. * (SIM) definitions.
*/ */
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) #if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
#include <asm/m5206sim.h> #include <asm/m5206sim.h>
#include <asm/mcfintc.h>
#elif defined(CONFIG_M520x) #elif defined(CONFIG_M520x)
#include <asm/m520xsim.h> #include <asm/m520xsim.h>
#elif defined(CONFIG_M523x) #elif defined(CONFIG_M523x)
#include <asm/m523xsim.h> #include <asm/m523xsim.h>
#include <asm/mcfintc.h>
#elif defined(CONFIG_M5249) #elif defined(CONFIG_M5249)
#include <asm/m5249sim.h> #include <asm/m5249sim.h>
#include <asm/mcfintc.h>
#elif defined(CONFIG_M527x) #elif defined(CONFIG_M527x)
#include <asm/m527xsim.h> #include <asm/m527xsim.h>
#elif defined(CONFIG_M5272) #elif defined(CONFIG_M5272)
...@@ -33,94 +35,13 @@ ...@@ -33,94 +35,13 @@
#include <asm/m528xsim.h> #include <asm/m528xsim.h>
#elif defined(CONFIG_M5307) #elif defined(CONFIG_M5307)
#include <asm/m5307sim.h> #include <asm/m5307sim.h>
#include <asm/mcfintc.h>
#elif defined(CONFIG_M532x) #elif defined(CONFIG_M532x)
#include <asm/m532xsim.h> #include <asm/m532xsim.h>
#elif defined(CONFIG_M5407) #elif defined(CONFIG_M5407)
#include <asm/m5407sim.h> #include <asm/m5407sim.h>
#include <asm/mcfintc.h>
#endif #endif
/*
* Define the base address of the SIM within the MBAR address space.
*/
#define MCFSIM_BASE 0x0 /* Base address of SIM */
/*
* Bit definitions for the ICR family of registers.
*/
#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */
#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */
#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */
#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */
#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */
#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */
#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */
#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */
#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */
#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */
#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */
#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */
#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */
/*
* Bit definitions for the Interrupt Mask register (IMR).
*/
#define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */
#define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */
#define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */
#define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */
#define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */
#define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */
#define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */
#define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */
#define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */
#define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */
#define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */
#define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */
#define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */
#if defined(CONFIG_M5206e)
#define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */
#define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */
#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
#define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */
#define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */
#define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */
#define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */
#endif
/*
* Mask for all of the SIM devices. Some parts have more or less
* SIM devices. This is a catchall for the sandard set.
*/
#ifndef MCFSIM_IMR_MASKALL
#define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */
#endif
/*
* PIT interrupt settings, if not found in mXXXXsim.h file.
*/
#ifndef ICR_INTRCONF
#define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */
#endif
#ifndef MCFPIT_IMR
#define MCFPIT_IMR MCFINTC_IMRH
#endif
#ifndef MCFPIT_IMR_IBIT
#define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32))
#endif
#ifndef __ASSEMBLY__
/*
* Definition for the interrupt auto-vectoring support.
*/
extern void mcf_autovector(unsigned int vec);
#endif /* __ASSEMBLY__ */
/****************************************************************************/ /****************************************************************************/
#endif /* mcfsim_h */ #endif /* mcfsim_h */
arch/m68k/include/asm/mcfsmc.h
View file @ 66bc4a6f
...@@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr) ...@@ -167,15 +167,15 @@ void smc_remap(unsigned int ioaddr)
static int once = 0; static int once = 0;
extern unsigned short ppdata; extern unsigned short ppdata;
if (once++ == 0) { if (once++ == 0) {
*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; *((volatile unsigned short *)MCFSIM_PADDR) = 0x00ec;
ppdata |= 0x0080; ppdata |= 0x0080;
*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; *((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
outw(0x0001, ioaddr + BANK_SELECT); outw(0x0001, ioaddr + BANK_SELECT);
outw(0x0001, ioaddr + BANK_SELECT); outw(0x0001, ioaddr + BANK_SELECT);
outw(0x0067, ioaddr + BASE); outw(0x0067, ioaddr + BASE);
ppdata &= ~0x0080; ppdata &= ~0x0080;
*((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; *((volatile unsigned short *)MCFSIM_PADAT) = ppdata;
} }
*((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
......
arch/m68k/include/asm/nettel.h
View file @ 66bc4a6f
...@@ -48,14 +48,14 @@ extern volatile unsigned short ppdata; ...@@ -48,14 +48,14 @@ extern volatile unsigned short ppdata;
static __inline__ unsigned int mcf_getppdata(void) static __inline__ unsigned int mcf_getppdata(void)
{ {
volatile unsigned short *pp; volatile unsigned short *pp;
pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); pp = (volatile unsigned short *) MCFSIM_PADAT;
return((unsigned int) *pp); return((unsigned int) *pp);
} }
static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
{ {
volatile unsigned short *pp; volatile unsigned short *pp;
pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); pp = (volatile unsigned short *) MCFSIM_PADAT;
ppdata = (ppdata & ~mask) | bits; ppdata = (ppdata & ~mask) | bits;
*pp = ppdata; *pp = ppdata;
} }
......
arch/m68k/include/asm/page_no.h
View file @ 66bc4a6f
#ifndef _M68KNOMMU_PAGE_H #ifndef _M68KNOMMU_PAGE_H
#define _M68KNOMMU_PAGE_H #define _M68KNOMMU_PAGE_H
#include <linux/const.h>
/* PAGE_SHIFT determines the page size */ /* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT (12) #define PAGE_SHIFT (12)
#define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1)) #define PAGE_MASK (~(PAGE_SIZE-1))
#include <asm/setup.h> #include <asm/setup.h>
......
arch/m68k/include/asm/pinmux.h 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO pinmux support.
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef pinmux_h
#define pinmux_h
#define MCFPINMUX_NONE -1
extern int mcf_pinmux_request(unsigned, unsigned);
extern void mcf_pinmux_release(unsigned, unsigned);
static inline int mcf_pinmux_is_valid(unsigned pinmux)
{
return pinmux != MCFPINMUX_NONE;
}
#endif
arch/m68k/include/asm/processor.h
View file @ 66bc4a6f
#ifdef __uClinux__ /*
#include "processor_no.h" * include/asm-m68k/processor.h
*
* Copyright (C) 1995 Hamish Macdonald
*/
#ifndef __ASM_M68K_PROCESSOR_H
#define __ASM_M68K_PROCESSOR_H
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
#include <linux/thread_info.h>
#include <asm/segment.h>
#include <asm/fpu.h>
#include <asm/ptrace.h>
static inline unsigned long rdusp(void)
{
#ifdef CONFIG_COLDFIRE
extern unsigned int sw_usp;
return sw_usp;
#else #else
#include "processor_mm.h" unsigned long usp;
__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
return usp;
#endif
}
static inline void wrusp(unsigned long usp)
{
#ifdef CONFIG_COLDFIRE
extern unsigned int sw_usp;
sw_usp = usp;
#else
__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
#endif
}
/*
* User space process size: 3.75GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#ifndef CONFIG_SUN3
#define TASK_SIZE (0xF0000000UL)
#else
#define TASK_SIZE (0x0E000000UL)
#endif
#ifdef __KERNEL__
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
#endif
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#ifdef CONFIG_MMU
#ifndef CONFIG_SUN3
#define TASK_UNMAPPED_BASE 0xC0000000UL
#else
#define TASK_UNMAPPED_BASE 0x0A000000UL
#endif
#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
#else
#define TASK_UNMAPPED_BASE 0
#endif
struct thread_struct {
unsigned long ksp; /* kernel stack pointer */
unsigned long usp; /* user stack pointer */
unsigned short sr; /* saved status register */
unsigned short fs; /* saved fs (sfc, dfc) */
unsigned long crp[2]; /* cpu root pointer */
unsigned long esp0; /* points to SR of stack frame */
unsigned long faddr; /* info about last fault */
int signo, code;
unsigned long fp[8*3];
unsigned long fpcntl[3]; /* fp control regs */
unsigned char fpstate[FPSTATESIZE]; /* floating point state */
struct thread_info info;
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
.sr = PS_S, \
.fs = __KERNEL_DS, \
.info = INIT_THREAD_INFO(init_task), \
}
#ifdef CONFIG_MMU
/*
* Do necessary setup to start up a newly executed thread.
*/
static inline void start_thread(struct pt_regs * regs, unsigned long pc,
unsigned long usp)
{
/* reads from user space */
set_fs(USER_DS);
regs->pc = pc;
regs->sr &= ~0x2000;
wrusp(usp);
}
#else
/*
* Coldfire stacks need to be re-aligned on trap exit, conventional
* 68k can handle this case cleanly.
*/
#ifdef CONFIG_COLDFIRE
#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
#else
#define reformat(_regs) do { } while (0)
#endif
#define start_thread(_regs, _pc, _usp) \
do { \
set_fs(USER_DS); /* reads from user space */ \
(_regs)->pc = (_pc); \
((struct switch_stack *)(_regs))[-1].a6 = 0; \
reformat(_regs); \
if (current->mm) \
(_regs)->d5 = current->mm->start_data; \
(_regs)->sr &= ~0x2000; \
wrusp(_usp); \
} while(0)
#endif
/* Forward declaration, a strange C thing */
struct task_struct;
/* Free all resources held by a thread. */
static inline void release_thread(struct task_struct *dead_task)
{
}
/* Prepare to copy thread state - unlazy all lazy status */
#define prepare_to_copy(tsk) do { } while (0)
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/*
* Free current thread data structures etc..
*/
static inline void exit_thread(void)
{
}
extern unsigned long thread_saved_pc(struct task_struct *tsk);
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) \
({ \
unsigned long eip = 0; \
if ((tsk)->thread.esp0 > PAGE_SIZE && \
(virt_addr_valid((tsk)->thread.esp0))) \
eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
#define cpu_relax() barrier()
#endif #endif
arch/m68k/include/asm/processor_mm.h deleted 100644 → 0
View file @ 96c015b7
/*
* include/asm-m68k/processor.h
*
* Copyright (C) 1995 Hamish Macdonald
*/
#ifndef __ASM_M68K_PROCESSOR_H
#define __ASM_M68K_PROCESSOR_H
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
#include <linux/thread_info.h>
#include <asm/segment.h>
#include <asm/fpu.h>
#include <asm/ptrace.h>
static inline unsigned long rdusp(void)
{
unsigned long usp;
__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
return usp;
}
static inline void wrusp(unsigned long usp)
{
__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
}
/*
* User space process size: 3.75GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#ifndef CONFIG_SUN3
#define TASK_SIZE (0xF0000000UL)
#else
#define TASK_SIZE (0x0E000000UL)
#endif
#ifdef __KERNEL__
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
#endif
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#ifndef CONFIG_SUN3
#define TASK_UNMAPPED_BASE 0xC0000000UL
#else
#define TASK_UNMAPPED_BASE 0x0A000000UL
#endif
#define TASK_UNMAPPED_ALIGN(addr, off) PAGE_ALIGN(addr)
struct thread_struct {
unsigned long ksp; /* kernel stack pointer */
unsigned long usp; /* user stack pointer */
unsigned short sr; /* saved status register */
unsigned short fs; /* saved fs (sfc, dfc) */
unsigned long crp[2]; /* cpu root pointer */
unsigned long esp0; /* points to SR of stack frame */
unsigned long faddr; /* info about last fault */
int signo, code;
unsigned long fp[8*3];
unsigned long fpcntl[3]; /* fp control regs */
unsigned char fpstate[FPSTATESIZE]; /* floating point state */
struct thread_info info;
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
.sr = PS_S, \
.fs = __KERNEL_DS, \
.info = INIT_THREAD_INFO(init_task), \
}
/*
* Do necessary setup to start up a newly executed thread.
*/
static inline void start_thread(struct pt_regs * regs, unsigned long pc,
unsigned long usp)
{
/* reads from user space */
set_fs(USER_DS);
regs->pc = pc;
regs->sr &= ~0x2000;
wrusp(usp);
}
/* Forward declaration, a strange C thing */
struct task_struct;
/* Free all resources held by a thread. */
static inline void release_thread(struct task_struct *dead_task)
{
}
/* Prepare to copy thread state - unlazy all lazy status */
#define prepare_to_copy(tsk) do { } while (0)
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/*
* Free current thread data structures etc..
*/
static inline void exit_thread(void)
{
}
extern unsigned long thread_saved_pc(struct task_struct *tsk);
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) \
({ \
unsigned long eip = 0; \
if ((tsk)->thread.esp0 > PAGE_SIZE && \
(virt_addr_valid((tsk)->thread.esp0))) \
eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
#define cpu_relax() barrier()
#endif
arch/m68k/include/asm/processor_no.h deleted 100644 → 0
View file @ 96c015b7
/*
* include/asm-m68knommu/processor.h
*
* Copyright (C) 1995 Hamish Macdonald
*/
#ifndef __ASM_M68K_PROCESSOR_H
#define __ASM_M68K_PROCESSOR_H
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
#define current_text_addr() ({ __label__ _l; _l: &&_l;})
#include <linux/compiler.h>
#include <linux/threads.h>
#include <asm/types.h>
#include <asm/segment.h>
#include <asm/fpu.h>
#include <asm/ptrace.h>
#include <asm/current.h>
static inline unsigned long rdusp(void)
{
#ifdef CONFIG_COLDFIRE
extern unsigned int sw_usp;
return(sw_usp);
#else
unsigned long usp;
__asm__ __volatile__("move %/usp,%0" : "=a" (usp));
return usp;
#endif
}
static inline void wrusp(unsigned long usp)
{
#ifdef CONFIG_COLDFIRE
extern unsigned int sw_usp;
sw_usp = usp;
#else
__asm__ __volatile__("move %0,%/usp" : : "a" (usp));
#endif
}
/*
* User space process size: 3.75GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE (0xF0000000UL)
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap's. We won't be using it
*/
#define TASK_UNMAPPED_BASE 0
/*
* if you change this structure, you must change the code and offsets
* in m68k/machasm.S
*/
struct thread_struct {
unsigned long ksp; /* kernel stack pointer */
unsigned long usp; /* user stack pointer */
unsigned short sr; /* saved status register */
unsigned short fs; /* saved fs (sfc, dfc) */
unsigned long crp[2]; /* cpu root pointer */
unsigned long esp0; /* points to SR of stack frame */
unsigned long fp[8*3];
unsigned long fpcntl[3]; /* fp control regs */
unsigned char fpstate[FPSTATESIZE]; /* floating point state */
};
#define INIT_THREAD { \
.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
.sr = PS_S, \
.fs = __KERNEL_DS, \
}
/*
* Coldfire stacks need to be re-aligned on trap exit, conventional
* 68k can handle this case cleanly.
*/
#if defined(CONFIG_COLDFIRE)
#define reformat(_regs) do { (_regs)->format = 0x4; } while(0)
#else
#define reformat(_regs) do { } while (0)
#endif
/*
* Do necessary setup to start up a newly executed thread.
*
* pass the data segment into user programs if it exists,
* it can't hurt anything as far as I can tell
*/
#define start_thread(_regs, _pc, _usp) \
do { \
set_fs(USER_DS); /* reads from user space */ \
(_regs)->pc = (_pc); \
((struct switch_stack *)(_regs))[-1].a6 = 0; \
reformat(_regs); \
if (current->mm) \
(_regs)->d5 = current->mm->start_data; \
(_regs)->sr &= ~0x2000; \
wrusp(_usp); \
} while(0)
/* Forward declaration, a strange C thing */
struct task_struct;
/* Free all resources held by a thread. */
static inline void release_thread(struct task_struct *dead_task)
{
}
/* Prepare to copy thread state - unlazy all lazy status */
#define prepare_to_copy(tsk) do { } while (0)
extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
/*
* Free current thread data structures etc..
*/
static inline void exit_thread(void)
{
}
unsigned long thread_saved_pc(struct task_struct *tsk);
unsigned long get_wchan(struct task_struct *p);
#define KSTK_EIP(tsk) \
({ \
unsigned long eip = 0; \
if ((tsk)->thread.esp0 > PAGE_SIZE && \
(virt_addr_valid((tsk)->thread.esp0))) \
eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
#define cpu_relax() barrier()
#endif
arch/m68k/include/asm/timex.h
View file @ 66bc4a6f
...@@ -3,10 +3,23 @@ ...@@ -3,10 +3,23 @@
* *
* m68k architecture timex specifications * m68k architecture timex specifications
*/ */
#ifndef _ASMm68k_TIMEX_H #ifndef _ASMm68K_TIMEX_H
#define _ASMm68k_TIMEX_H #define _ASMm68K_TIMEX_H
#ifdef CONFIG_COLDFIRE
/*
* CLOCK_TICK_RATE should give the underlying frequency of the tick timer
* to make ntp work best. For Coldfires, that's the main clock.
*/
#include <asm/coldfire.h>
#define CLOCK_TICK_RATE MCF_CLK
#else
/*
* This default CLOCK_TICK_RATE is probably wrong for many 68k boards
* Users of those boards will need to check and modify accordingly
*/
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
#endif
typedef unsigned long cycles_t; typedef unsigned long cycles_t;
......
arch/m68knommu/Kconfig
View file @ 66bc4a6f
...@@ -47,6 +47,10 @@ config GENERIC_FIND_NEXT_BIT ...@@ -47,6 +47,10 @@ config GENERIC_FIND_NEXT_BIT
bool bool
default y default y
config GENERIC_GPIO
bool
default n
config GENERIC_HWEIGHT config GENERIC_HWEIGHT
bool bool
default y default y
...@@ -182,6 +186,8 @@ config M527x ...@@ -182,6 +186,8 @@ config M527x
config COLDFIRE config COLDFIRE
bool bool
depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407) depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407)
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
default y default y
config CLOCK_SET config CLOCK_SET
......
arch/m68knommu/kernel/irq.c
View file @ 66bc4a6f
...@@ -29,32 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) ...@@ -29,32 +29,6 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs)
set_irq_regs(oldregs); set_irq_regs(oldregs);
} }
void ack_bad_irq(unsigned int irq)
{
printk(KERN_ERR "IRQ: unexpected irq=%d\n", irq);
}
static struct irq_chip m_irq_chip = {
.name = "M68K-INTC",
.enable = enable_vector,
.disable = disable_vector,
.ack = ack_vector,
};
void __init init_IRQ(void)
{
int irq;
init_vectors();
for (irq = 0; (irq < NR_IRQS); irq++) {
irq_desc[irq].status = IRQ_DISABLED;
irq_desc[irq].action = NULL;
irq_desc[irq].depth = 1;
irq_desc[irq].chip = &m_irq_chip;
}
}
int show_interrupts(struct seq_file *p, void *v) int show_interrupts(struct seq_file *p, void *v)
{ {
struct irqaction *ap; struct irqaction *ap;
......
arch/m68knommu/kernel/time.c
View file @ 66bc4a6f
...@@ -69,7 +69,7 @@ static unsigned long read_rtc_mmss(void) ...@@ -69,7 +69,7 @@ static unsigned long read_rtc_mmss(void)
if ((year += 1900) < 1970) if ((year += 1900) < 1970)
year += 100; year += 100;
return mktime(year, mon, day, hour, min, sec);; return mktime(year, mon, day, hour, min, sec);
} }
unsigned long read_persistent_clock(void) unsigned long read_persistent_clock(void)
......
arch/m68knommu/lib/checksum.c
View file @ 66bc4a6f
...@@ -92,6 +92,7 @@ static unsigned long do_csum(const unsigned char * buff, int len) ...@@ -92,6 +92,7 @@ static unsigned long do_csum(const unsigned char * buff, int len)
return result; return result;
} }
#ifdef CONFIG_COLDFIRE
/* /*
* This is a version of ip_compute_csum() optimized for IP headers, * This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries. * which always checksum on 4 octet boundaries.
...@@ -100,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) ...@@ -100,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{ {
return (__force __sum16)~do_csum(iph,ihl*4); return (__force __sum16)~do_csum(iph,ihl*4);
} }
#endif
/* /*
* computes the checksum of a memory block at buff, length len, * computes the checksum of a memory block at buff, length len,
...@@ -126,15 +128,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum) ...@@ -126,15 +128,6 @@ __wsum csum_partial(const void *buff, int len, __wsum sum)
EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial);
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
__sum16 ip_compute_csum(const void *buff, int len)
{
return (__force __sum16)~do_csum(buff,len);
}
/* /*
* copy from fs while checksumming, otherwise like csum_partial * copy from fs while checksumming, otherwise like csum_partial
*/ */
......
arch/m68knommu/platform/5206/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/5206/config.c
View file @ 66bc4a6f
...@@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq) ...@@ -49,11 +49,11 @@ static void __init m5206_uart_init_line(int line, int irq)
if (line == 0) { if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) { } else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); mcf_mapirq2imr(irq, MCFINTC_UART1);
} }
} }
...@@ -68,38 +68,19 @@ static void __init m5206_uarts_init(void) ...@@ -68,38 +68,19 @@ static void __init m5206_uarts_init(void)
/***************************************************************************/ /***************************************************************************/
void mcf_autovector(unsigned int vec) static void __init m5206_timers_init(void)
{ {
volatile unsigned char *mbar; /* Timer1 is always used as system timer */
unsigned char icr; writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
if ((vec >= 25) && (vec <= 31)) { mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
vec -= 25;
mbar = (volatile unsigned char *) MCF_MBAR; #ifdef CONFIG_HIGHPROFILE
icr = MCFSIM_ICR_AUTOVEC | (vec << 3); /* Timer2 is to be used as a high speed profile timer */
*(mbar + MCFSIM_ICR1 + vec) = icr; writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
vec = 0x1 << (vec + 1); MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_setimr(mcf_getimr() & ~vec); mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
} #endif
}
/***************************************************************************/
void mcf_settimericr(unsigned int timer, unsigned int level)
{
volatile unsigned char *icrp;
unsigned int icr, imr;
if (timer <= 2) {
switch (timer) {
case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
}
icrp = (volatile unsigned char *) (MCF_MBAR + icr);
*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
mcf_setimr(mcf_getimr() & ~imr);
}
} }
/***************************************************************************/ /***************************************************************************/
...@@ -117,15 +98,20 @@ void m5206_cpu_reset(void) ...@@ -117,15 +98,20 @@ void m5206_cpu_reset(void)
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mcf_setimr(MCFSIM_IMR_MASKALL);
mach_reset = m5206_cpu_reset; mach_reset = m5206_cpu_reset;
m5206_timers_init();
m5206_uarts_init();
/* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1);
mcf_mapirq2imr(28, MCFINTC_EINT4);
mcf_mapirq2imr(31, MCFINTC_EINT7);
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void) static int __init init_BSP(void)
{ {
m5206_uarts_init();
platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices)); platform_add_devices(m5206_devices, ARRAY_SIZE(m5206_devices));
return 0; return 0;
} }
......
arch/m68knommu/platform/5206/gpio.c 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO support
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfgpio.h>
static struct mcf_gpio_chip mcf_gpio_chips[] = {
{
.gpio_chip = {
.label = "PP",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
.ngpio = 8,
},
.pddr = MCFSIM_PADDR,
.podr = MCFSIM_PADAT,
.ppdr = MCFSIM_PADAT,
},
};
static int __init mcf_gpio_init(void)
{
unsigned i = 0;
while (i < ARRAY_SIZE(mcf_gpio_chips))
(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
return 0;
}
core_initcall(mcf_gpio_init);
arch/m68knommu/platform/5206e/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/5206e/config.c
View file @ 66bc4a6f
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
#include <asm/machdep.h> #include <asm/machdep.h>
#include <asm/coldfire.h> #include <asm/coldfire.h>
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfdma.h> #include <asm/mcfdma.h>
#include <asm/mcfuart.h> #include <asm/mcfuart.h>
...@@ -49,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq) ...@@ -49,11 +50,11 @@ static void __init m5206e_uart_init_line(int line, int irq)
if (line == 0) { if (line == 0) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCFUART_BASE1 + MCFUART_UIVR); writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) { } else if (line == 1) {
writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCFUART_BASE2 + MCFUART_UIVR); writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); mcf_mapirq2imr(irq, MCFINTC_UART1);
} }
} }
...@@ -68,38 +69,19 @@ static void __init m5206e_uarts_init(void) ...@@ -68,38 +69,19 @@ static void __init m5206e_uarts_init(void)
/***************************************************************************/ /***************************************************************************/
void mcf_autovector(unsigned int vec) static void __init m5206e_timers_init(void)
{
volatile unsigned char *mbar;
unsigned char icr;
if ((vec >= 25) && (vec <= 31)) {
vec -= 25;
mbar = (volatile unsigned char *) MCF_MBAR;
icr = MCFSIM_ICR_AUTOVEC | (vec << 3);
*(mbar + MCFSIM_ICR1 + vec) = icr;
vec = 0x1 << (vec + 1);
mcf_setimr(mcf_getimr() & ~vec);
}
}
/***************************************************************************/
void mcf_settimericr(unsigned int timer, unsigned int level)
{ {
volatile unsigned char *icrp; /* Timer1 is always used as system timer */
unsigned int icr, imr; writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER1ICR);
if (timer <= 2) { mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
switch (timer) {
case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break; #ifdef CONFIG_HIGHPROFILE
default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break; /* Timer2 is to be used as a high speed profile timer */
} writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
MCF_MBAR + MCFSIM_TIMER2ICR);
icrp = (volatile unsigned char *) (MCF_MBAR + icr); mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3; #endif
mcf_setimr(mcf_getimr() & ~imr);
}
} }
/***************************************************************************/ /***************************************************************************/
...@@ -117,8 +99,6 @@ void m5206e_cpu_reset(void) ...@@ -117,8 +99,6 @@ void m5206e_cpu_reset(void)
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mcf_setimr(MCFSIM_IMR_MASKALL);
#if defined(CONFIG_NETtel) #if defined(CONFIG_NETtel)
/* Copy command line from FLASH to local buffer... */ /* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size); memcpy(commandp, (char *) 0xf0004000, size);
...@@ -126,13 +106,19 @@ void __init config_BSP(char *commandp, int size) ...@@ -126,13 +106,19 @@ void __init config_BSP(char *commandp, int size)
#endif /* CONFIG_NETtel */ #endif /* CONFIG_NETtel */
mach_reset = m5206e_cpu_reset; mach_reset = m5206e_cpu_reset;
m5206e_timers_init();
m5206e_uarts_init();
/* Only support the external interrupts on their primary level */
mcf_mapirq2imr(25, MCFINTC_EINT1);
mcf_mapirq2imr(28, MCFINTC_EINT4);
mcf_mapirq2imr(31, MCFINTC_EINT7);
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void) static int __init init_BSP(void)
{ {
m5206e_uarts_init();
platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices)); platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
return 0; return 0;
} }
......
arch/m68knommu/platform/5206e/gpio.c 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO support
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfgpio.h>
static struct mcf_gpio_chip mcf_gpio_chips[] = {
{
.gpio_chip = {
.label = "PP",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
.ngpio = 8,
},
.pddr = MCFSIM_PADDR,
.podr = MCFSIM_PADAT,
.ppdr = MCFSIM_PADAT,
},
};
static int __init mcf_gpio_init(void)
{
unsigned i = 0;
while (i < ARRAY_SIZE(mcf_gpio_chips))
(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
return 0;
}
core_initcall(mcf_gpio_init);
arch/m68knommu/platform/520x/Makefile
View file @ 66bc4a6f
...@@ -14,4 +14,4 @@ ...@@ -14,4 +14,4 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/520x/config.c
View file @ 66bc4a6f
...@@ -81,20 +81,11 @@ static struct platform_device *m520x_devices[] __initdata = { ...@@ -81,20 +81,11 @@ static struct platform_device *m520x_devices[] __initdata = {
/***************************************************************************/ /***************************************************************************/
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
static void __init m520x_uart_init_line(int line, int irq) static void __init m520x_uart_init_line(int line, int irq)
{ {
u32 imr;
u16 par; u16 par;
u8 par2; u8 par2;
writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
imr = readl(INTC0 + MCFINTC_IMRL);
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
writel(imr, INTC0 + MCFINTC_IMRL);
switch (line) { switch (line) {
case 0: case 0:
par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
...@@ -131,18 +122,8 @@ static void __init m520x_uarts_init(void) ...@@ -131,18 +122,8 @@ static void __init m520x_uarts_init(void)
static void __init m520x_fec_init(void) static void __init m520x_fec_init(void)
{ {
u32 imr;
u8 v; u8 v;
/* Unmask FEC interrupts at ColdFire interrupt controller */
writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 36);
writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 40);
writeb(0x4, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 42);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
imr &= ~0x0001FFF0;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
/* Set multi-function pins to ethernet mode */ /* Set multi-function pins to ethernet mode */
v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC); v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC);
writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC); writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC);
...@@ -153,17 +134,6 @@ static void __init m520x_fec_init(void) ...@@ -153,17 +134,6 @@ static void __init m520x_fec_init(void)
/***************************************************************************/ /***************************************************************************/
/*
* Program the vector to be an auto-vectored.
*/
void mcf_autovector(unsigned int vec)
{
/* Everything is auto-vectored on the 520x devices */
}
/***************************************************************************/
static void m520x_cpu_reset(void) static void m520x_cpu_reset(void)
{ {
local_irq_disable(); local_irq_disable();
......
arch/m68knommu/platform/520x/gpio.c 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO support
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfgpio.h>
static struct mcf_gpio_chip mcf_gpio_chips[] = {
{
.gpio_chip = {
.label = "PIRQ",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
.ngpio = 8,
},
.pddr = MCFEPORT_EPDDR,
.podr = MCFEPORT_EPDR,
.ppdr = MCFEPORT_EPPDR,
},
{
.gpio_chip = {
.label = "BUSCTL",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 8,
.ngpio = 4,
},
.pddr = MCFGPIO_PDDR_BUSCTL,
.podr = MCFGPIO_PODR_BUSCTL,
.ppdr = MCFGPIO_PPDSDR_BUSCTL,
.setr = MCFGPIO_PPDSDR_BUSCTL,
.clrr = MCFGPIO_PCLRR_BUSCTL,
},
{
.gpio_chip = {
.label = "BE",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 16,
.ngpio = 4,
},
.pddr = MCFGPIO_PDDR_BE,
.podr = MCFGPIO_PODR_BE,
.ppdr = MCFGPIO_PPDSDR_BE,
.setr = MCFGPIO_PPDSDR_BE,
.clrr = MCFGPIO_PCLRR_BE,
},
{
.gpio_chip = {
.label = "CS",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 25,
.ngpio = 3,
},
.pddr = MCFGPIO_PDDR_CS,
.podr = MCFGPIO_PODR_CS,
.ppdr = MCFGPIO_PPDSDR_CS,
.setr = MCFGPIO_PPDSDR_CS,
.clrr = MCFGPIO_PCLRR_CS,
},
{
.gpio_chip = {
.label = "FECI2C",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 32,
.ngpio = 4,
},
.pddr = MCFGPIO_PDDR_FECI2C,
.podr = MCFGPIO_PODR_FECI2C,
.ppdr = MCFGPIO_PPDSDR_FECI2C,
.setr = MCFGPIO_PPDSDR_FECI2C,
.clrr = MCFGPIO_PCLRR_FECI2C,
},
{
.gpio_chip = {
.label = "QSPI",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 40,
.ngpio = 4,
},
.pddr = MCFGPIO_PDDR_QSPI,
.podr = MCFGPIO_PODR_QSPI,
.ppdr = MCFGPIO_PPDSDR_QSPI,
.setr = MCFGPIO_PPDSDR_QSPI,
.clrr = MCFGPIO_PCLRR_QSPI,
},
{
.gpio_chip = {
.label = "TIMER",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 48,
.ngpio = 4,
},
.pddr = MCFGPIO_PDDR_TIMER,
.podr = MCFGPIO_PODR_TIMER,
.ppdr = MCFGPIO_PPDSDR_TIMER,
.setr = MCFGPIO_PPDSDR_TIMER,
.clrr = MCFGPIO_PCLRR_TIMER,
},
{
.gpio_chip = {
.label = "UART",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 56,
.ngpio = 8,
},
.pddr = MCFGPIO_PDDR_UART,
.podr = MCFGPIO_PODR_UART,
.ppdr = MCFGPIO_PPDSDR_UART,
.setr = MCFGPIO_PPDSDR_UART,
.clrr = MCFGPIO_PCLRR_UART,
},
{
.gpio_chip = {
.label = "FECH",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 64,
.ngpio = 8,
},
.pddr = MCFGPIO_PDDR_FECH,
.podr = MCFGPIO_PODR_FECH,
.ppdr = MCFGPIO_PPDSDR_FECH,
.setr = MCFGPIO_PPDSDR_FECH,
.clrr = MCFGPIO_PCLRR_FECH,
},
{
.gpio_chip = {
.label = "FECL",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 72,
.ngpio = 8,
},
.pddr = MCFGPIO_PDDR_FECL,
.podr = MCFGPIO_PODR_FECL,
.ppdr = MCFGPIO_PPDSDR_FECL,
.setr = MCFGPIO_PPDSDR_FECL,
.clrr = MCFGPIO_PCLRR_FECL,
},
};
static int __init mcf_gpio_init(void)
{
unsigned i = 0;
while (i < ARRAY_SIZE(mcf_gpio_chips))
(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
return 0;
}
core_initcall(mcf_gpio_init);
arch/m68knommu/platform/523x/Makefile
View file @ 66bc4a6f
...@@ -14,4 +14,4 @@ ...@@ -14,4 +14,4 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/523x/config.c
View file @ 66bc4a6f
...@@ -82,66 +82,20 @@ static struct platform_device *m523x_devices[] __initdata = { ...@@ -82,66 +82,20 @@ static struct platform_device *m523x_devices[] __initdata = {
/***************************************************************************/ /***************************************************************************/
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
static void __init m523x_uart_init_line(int line, int irq)
{
u32 imr;
if ((line < 0) || (line > 2))
return;
writeb(0x30+line, (INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line));
imr = readl(INTC0 + MCFINTC_IMRL);
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
writel(imr, INTC0 + MCFINTC_IMRL);
}
static void __init m523x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m523x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m523x_uart_init_line(line, m523x_uart_platform[line].irq);
}
/***************************************************************************/
static void __init m523x_fec_init(void) static void __init m523x_fec_init(void)
{ {
u32 imr; u16 par;
u8 v;
/* Unmask FEC interrupts at ColdFire interrupt controller */
writeb(0x28, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 23); /* Set multi-function pins to ethernet use */
writeb(0x27, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 27); par = readw(MCF_IPSBAR + 0x100082);
writeb(0x26, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0 + 29); writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH); writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
imr &= ~0xf;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
imr = readl(MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
imr &= ~0xff800001;
writel(imr, MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL);
}
/***************************************************************************/
void mcf_disableall(void)
{
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
} }
/***************************************************************************/ /***************************************************************************/
void mcf_autovector(unsigned int vec)
{
/* Everything is auto-vectored on the 523x */
}
/***************************************************************************/
static void m523x_cpu_reset(void) static void m523x_cpu_reset(void)
{ {
local_irq_disable(); local_irq_disable();
...@@ -152,16 +106,14 @@ static void m523x_cpu_reset(void) ...@@ -152,16 +106,14 @@ static void m523x_cpu_reset(void)
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mcf_disableall();
mach_reset = m523x_cpu_reset; mach_reset = m523x_cpu_reset;
m523x_uarts_init();
m523x_fec_init();
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void) static int __init init_BSP(void)
{ {
m523x_fec_init();
platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices)); platform_add_devices(m523x_devices, ARRAY_SIZE(m523x_devices));
return 0; return 0;
} }
......
arch/m68knommu/platform/523x/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5249/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o intc2.o
arch/m68knommu/platform/5249/config.c
View file @ 66bc4a6f
...@@ -48,11 +48,11 @@ static void __init m5249_uart_init_line(int line, int irq) ...@@ -48,11 +48,11 @@ static void __init m5249_uart_init_line(int line, int irq)
if (line == 0) { if (line == 0) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); mcf_mapirq2imr(irq, MCFINTC_UART0);
} else if (line == 1) { } else if (line == 1) {
writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); mcf_mapirq2imr(irq, MCFINTC_UART1);
} }
} }
...@@ -65,38 +65,21 @@ static void __init m5249_uarts_init(void) ...@@ -65,38 +65,21 @@ static void __init m5249_uarts_init(void)
m5249_uart_init_line(line, m5249_uart_platform[line].irq); m5249_uart_init_line(line, m5249_uart_platform[line].irq);
} }
/***************************************************************************/ /***************************************************************************/
void mcf_autovector(unsigned int vec) static void __init m5249_timers_init(void)
{ {
volatile unsigned char *mbar; /* Timer1 is always used as system timer */
writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
if ((vec >= 25) && (vec <= 31)) { MCF_MBAR + MCFSIM_TIMER1ICR);
mbar = (volatile unsigned char *) MCF_MBAR; mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
vec = 0x1 << (vec - 24);
*(mbar + MCFSIM_AVR) |= vec; #ifdef CONFIG_HIGHPROFILE
mcf_setimr(mcf_getimr() & ~vec); /* Timer2 is to be used as a high speed profile timer */
} writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
} MCF_MBAR + MCFSIM_TIMER2ICR);
mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
/***************************************************************************/ #endif
void mcf_settimericr(unsigned int timer, unsigned int level)
{
volatile unsigned char *icrp;
unsigned int icr, imr;
if (timer <= 2) {
switch (timer) {
case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
}
icrp = (volatile unsigned char *) (MCF_MBAR + icr);
*icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
mcf_setimr(mcf_getimr() & ~imr);
}
} }
/***************************************************************************/ /***************************************************************************/
...@@ -114,15 +97,15 @@ void m5249_cpu_reset(void) ...@@ -114,15 +97,15 @@ void m5249_cpu_reset(void)
void __init config_BSP(char *commandp, int size) void __init config_BSP(char *commandp, int size)
{ {
mcf_setimr(MCFSIM_IMR_MASKALL);
mach_reset = m5249_cpu_reset; mach_reset = m5249_cpu_reset;
m5249_timers_init();
m5249_uarts_init();
} }
/***************************************************************************/ /***************************************************************************/
static int __init init_BSP(void) static int __init init_BSP(void)
{ {
m5249_uarts_init();
platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices)); platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
return 0; return 0;
} }
......
arch/m68knommu/platform/5249/gpio.c 0 → 100644
View file @ 66bc4a6f
/*
* Coldfire generic GPIO support
*
* (C) Copyright 2009, Steven King <sfking@fdwdc.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfgpio.h>
static struct mcf_gpio_chip mcf_gpio_chips[] = {
{
.gpio_chip = {
.label = "GPIO0",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
.ngpio = 32,
},
.pddr = MCFSIM2_GPIOENABLE,
.podr = MCFSIM2_GPIOWRITE,
.ppdr = MCFSIM2_GPIOREAD,
},
{
.gpio_chip = {
.label = "GPIO1",
.request = mcf_gpio_request,
.free = mcf_gpio_free,
.direction_input = mcf_gpio_direction_input,
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
.base = 32,
.ngpio = 32,
},
.pddr = MCFSIM2_GPIO1ENABLE,
.podr = MCFSIM2_GPIO1WRITE,
.ppdr = MCFSIM2_GPIO1READ,
},
};
static int __init mcf_gpio_init(void)
{
unsigned i = 0;
while (i < ARRAY_SIZE(mcf_gpio_chips))
(void)gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
return 0;
}
core_initcall(mcf_gpio_init);
arch/m68knommu/platform/5249/intc2.c 0 → 100644
View file @ 66bc4a6f
/*
* intc2.c -- support for the 2nd INTC controller of the 5249
*
* (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
static void intc2_irq_gpio_mask(unsigned int irq)
{
u32 imr;
imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
imr &= ~(0x1 << (irq - MCFINTC2_GPIOIRQ0));
writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
}
static void intc2_irq_gpio_unmask(unsigned int irq)
{
u32 imr;
imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
imr |= (0x1 << (irq - MCFINTC2_GPIOIRQ0));
writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
}
static void intc2_irq_gpio_ack(unsigned int irq)
{
writel(0x1 << (irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
}
static struct irq_chip intc2_irq_gpio_chip = {
.name = "CF-INTC2",
.mask = intc2_irq_gpio_mask,
.unmask = intc2_irq_gpio_unmask,
.ack = intc2_irq_gpio_ack,
};
static int __init mcf_intc2_init(void)
{
int irq;
/* GPIO interrupt sources */
for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++)
irq_desc[irq].chip = &intc2_irq_gpio_chip;
return 0;
}
arch_initcall(mcf_intc2_init);
arch/m68knommu/platform/5272/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o intc.o
arch/m68knommu/platform/5272/config.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5272/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5272/intc.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/527x/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/527x/config.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/527x/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/528x/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/528x/config.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/528x/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5307/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y += config.o obj-y += config.o gpio.o
arch/m68knommu/platform/5307/config.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5307/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/532x/Makefile
View file @ 66bc4a6f
...@@ -15,4 +15,4 @@ ...@@ -15,4 +15,4 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
#obj-y := config.o usb-mcf532x.o spi-mcf532x.o #obj-y := config.o usb-mcf532x.o spi-mcf532x.o
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/532x/config.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/532x/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5407/Makefile
View file @ 66bc4a6f
...@@ -14,5 +14,5 @@ ...@@ -14,5 +14,5 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-y := config.o obj-y := config.o gpio.o
arch/m68knommu/platform/5407/config.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/5407/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/68328/ints.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/68360/ints.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/Makefile
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/gpio.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/intc-2.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/intc-simr.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/intc.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/pinmux.c 0 → 100644
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/pit.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/timers.c
View file @ 66bc4a6f
This diff is collapsed.
arch/m68knommu/platform/coldfire/vectors.c
View file @ 66bc4a6f
This diff is collapsed.
drivers/net/fec.c
View file @ 66bc4a6f
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7