Commit 66e89522 authored by Jarod Wilson's avatar Jarod Wilson Committed by Mauro Carvalho Chehab

V4L/DVB: IR: add mceusb IR receiver driver

This is a new driver for the Windows Media Center Edition/eHome
Infrared Remote transceiver devices. Its a port of the current
lirc_mceusb driver to ir-core, and currently lacks transmit support,
but will grow it back soon enough... This driver also differs from
lirc_mceusb in that it borrows heavily from a simplified IR buffer
decode routine found in Jon Smirl's earlier ir-mceusb port.

This driver has been tested on the original first-generation MCE IR
device with the MS vendor ID, as well as a current-generation device
with a Topseed vendor ID. Every receiver supported by lirc_mceusb
should work equally well. Testing was done primarily with RC6 MCE
remotes, but also briefly with a Hauppauge RC5 remote, and all works
as expected.

v2: fix call to ir_raw_event_handle so repeats work as they should.
Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 0204fe2a
...@@ -68,3 +68,15 @@ config IR_IMON ...@@ -68,3 +68,15 @@ config IR_IMON
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called imon. module will be called imon.
config IR_MCEUSB
tristate "Windows Media Center Ed. eHome Infrared Transceiver"
depends on USB_ARCH_HAS_HCD
depends on IR_CORE
select USB
---help---
Say Y here if you want to use a Windows Media Center Edition
eHome Infrared Transceiver.
To compile this driver as a module, choose M here: the
module will be called mceusb.
...@@ -13,3 +13,4 @@ obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o ...@@ -13,3 +13,4 @@ obj-$(CONFIG_IR_SONY_DECODER) += ir-sony-decoder.o
# stand-alone IR receivers/transmitters # stand-alone IR receivers/transmitters
obj-$(CONFIG_IR_IMON) += imon.o obj-$(CONFIG_IR_IMON) += imon.o
obj-$(CONFIG_IR_MCEUSB) += mceusb.o
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment