ARM: dt: Add references to tegra_car clocks

Add references to tegra_car clocks for the basic device nodes. Also remove
the clock-frequency property of the serial node as the UART driver can now
use the clock framework to obtain the frequency.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

arch/arm/boot/dts/tegra114-dalmore.dts

@@ -12,7 +12,6 @@ memory {
 
 	serial@70006300 {
 		status = "okay";
-		clock-frequency = <408000000>;
 	};
 
 	pmc {

arch/arm/boot/dts/tegra114-pluto.dts

@@ -12,7 +12,6 @@ memory {
 
 	serial@70006300 {
 		status = "okay";
-		clock-frequency = <408000000>;
 	};
 
 	pmc {

arch/arm/boot/dts/tegra114.dtsi

@@ -24,10 +24,11 @@ timer@60005000 {
 			      0 42 0x04
 			      0 121 0x04
 			      0 122 0x04>;
+		clocks = <&tegra_car 5>;
 	};
 
 	tegra_car: clock {
-		compatible = "nvidia,tegra114-car, nvidia,tegra30-car";
+		compatible = "nvidia,tegra114-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -66,6 +67,7 @@ serial@70006000 {
 		reg-shift = <2>;
 		interrupts = <0 36 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 6>;
 	};
 
 	serial@70006040 {
@@ -74,6 +76,7 @@ serial@70006040 {
 		reg-shift = <2>;
 		interrupts = <0 37 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 192>;
 	};
 
 	serial@70006200 {
@@ -82,6 +85,7 @@ serial@70006200 {
 		reg-shift = <2>;
 		interrupts = <0 46 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 55>;
 	};
 
 	serial@70006300 {
@@ -90,12 +94,14 @@ serial@70006300 {
 		reg-shift = <2>;
 		interrupts = <0 90 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 65>;
 	};
 
 	rtc {
 		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <0 2 0x04>;
+		clocks = <&tegra_car 4>;
 	};
 
 	pmc {