iio: st_sensors: Add lsm9ds0 IMU support

We can utilize separate drivers for accelerometer and magnetometer,
so here is the glue driver to enable LSM9DS0 IMU support.

The idea was suggested by Crestez Dan Leonard in [1]. The proposed change
was sent as RFC due to race condition concerns, which are indeed possible.

In order to amend the initial change, I went further by providing a specific
multi-instantiate probe driver that reuses existing accelerometer and
magnetometer.

[1]: https://lore.kernel.org/patchwork/patch/670353/Suggested-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Cc: mr.lahorde@laposte.net
Cc: Matija Podravec <matija_podravec@fastmail.fm>
Cc: Sergey Borishchenko <borischenko.sergey@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210414195454.84183-6-andriy.shevchenko@linux.intel.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/accel/st_accel_core.c

@@ -980,7 +980,94 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
-
+	{
+		.wai = 0x49,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LSM9DS0_IMU_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = GENMASK(7, 4),
+			.odr_avl = {
+				{ 3, 0x01, },
+				{ 6, 0x02, },
+				{ 12, 0x03, },
+				{ 25, 0x04, },
+				{ 50, 0x05, },
+				{ 100, 0x06, },
+				{ 200, 0x07, },
+				{ 400, 0x08, },
+				{ 800, 0x09, },
+				{ 1600, 0x0a, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = GENMASK(7, 4),
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x21,
+			.mask = GENMASK(5, 3),
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_2G,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_4G,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(122),
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_6G,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(183),
+				},
+				[3] = {
+					.num = ST_ACCEL_FS_AVL_8G,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
+				},
+				[4] = {
+					.num = ST_ACCEL_FS_AVL_16G,
+					.value = 0x04,
+					.gain = IIO_G_TO_M_S_2(732),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = BIT(3),
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = BIT(2),
+			},
+			.int2 = {
+				.addr = 0x23,
+				.mask = BIT(3),
+			},
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = GENMASK(2, 0),
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
 };
 
 /* Default accel DRDY is available on INT1 pin */

drivers/iio/imu/Kconfig

@@ -94,6 +94,7 @@ config KMX61
 source "drivers/iio/imu/inv_icm42600/Kconfig"
 source "drivers/iio/imu/inv_mpu6050/Kconfig"
 source "drivers/iio/imu/st_lsm6dsx/Kconfig"
+source "drivers/iio/imu/st_lsm9ds0/Kconfig"
 
 endmenu
 

drivers/iio/imu/Makefile

@@ -26,3 +26,4 @@ obj-y += inv_mpu6050/
 obj-$(CONFIG_KMX61) += kmx61.o
 
 obj-y += st_lsm6dsx/
+obj-y += st_lsm9ds0/

drivers/iio/imu/st_lsm9ds0/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+
+config IIO_ST_LSM9DS0
+	tristate "STMicroelectronics LSM9DS0 IMU driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	depends on !SENSORS_LIS3_I2C
+	depends on !SENSORS_LIS3_SPI
+	select IIO_ST_LSM9DS0_I2C if I2C
+	select IIO_ST_LSM9DS0_SPI if SPI_MASTER
+	select IIO_ST_ACCEL_3AXIS
+	select IIO_ST_MAGN_3AXIS
+
+	help
+	  Say yes here to build support for STMicroelectronics LSM9DS0 IMU
+	  sensor. Supported devices: accelerometer/magnetometer of lsm9ds0.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called st_lsm9ds0.
+
+config IIO_ST_LSM9DS0_I2C
+	tristate
+	depends on IIO_ST_LSM9DS0
+	select REGMAP_I2C
+
+config IIO_ST_LSM9DS0_SPI
+	tristate
+	depends on IIO_ST_LSM9DS0
+	select REGMAP_SPI

drivers/iio/imu/st_lsm9ds0/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_IIO_ST_LSM9DS0) += st_lsm9ds0.o
+st_lsm9ds0-y := st_lsm9ds0_core.o
+obj-$(CONFIG_IIO_ST_LSM9DS0_I2C) += st_lsm9ds0_i2c.o
+obj-$(CONFIG_IIO_ST_LSM9DS0_SPI) += st_lsm9ds0_spi.o

drivers/iio/imu/st_lsm9ds0/st_lsm9ds0.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+// STMicroelectronics LSM9DS0 IMU driver
+
+#ifndef ST_LSM9DS0_H
+#define ST_LSM9DS0_H
+
+struct iio_dev;
+struct regulator;
+
+struct st_lsm9ds0 {
+	struct device *dev;
+	const char *name;
+	int irq;
+	struct iio_dev *accel;
+	struct iio_dev *magn;
+	struct regulator *vdd;
+	struct regulator *vdd_io;
+};
+
+int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap);
+int st_lsm9ds0_remove(struct st_lsm9ds0 *lsm9ds0);
+
+#endif /* ST_LSM9DS0_H */

drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics LSM9DS0 IMU driver
+ *
+ * Copyright (C) 2021, Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/iio.h>
+
+#include "st_lsm9ds0.h"
+
+static int st_lsm9ds0_power_enable(struct device *dev, struct st_lsm9ds0 *lsm9ds0)
+{
+	int ret;
+
+	/* Regulators not mandatory, but if requested we should enable them. */
+	lsm9ds0->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(lsm9ds0->vdd)) {
+		dev_err(dev, "unable to get Vdd supply\n");
+		return PTR_ERR(lsm9ds0->vdd);
+	}
+	ret = regulator_enable(lsm9ds0->vdd);
+	if (ret) {
+		dev_warn(dev, "Failed to enable specified Vdd supply\n");
+		return ret;
+	}
+
+	lsm9ds0->vdd_io = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(lsm9ds0->vdd_io)) {
+		dev_err(dev, "unable to get Vdd_IO supply\n");
+		regulator_disable(lsm9ds0->vdd);
+		return PTR_ERR(lsm9ds0->vdd_io);
+	}
+	ret = regulator_enable(lsm9ds0->vdd_io);
+	if (ret) {
+		dev_warn(dev, "Failed to enable specified Vdd_IO supply\n");
+		regulator_disable(lsm9ds0->vdd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void st_lsm9ds0_power_disable(void *data)
+{
+	struct st_lsm9ds0 *lsm9ds0 = data;
+
+	regulator_disable(lsm9ds0->vdd_io);
+	regulator_disable(lsm9ds0->vdd);
+}
+
+static int devm_st_lsm9ds0_power_enable(struct st_lsm9ds0 *lsm9ds0)
+{
+	struct device *dev = lsm9ds0->dev;
+	int ret;
+
+	ret = st_lsm9ds0_power_enable(dev, lsm9ds0);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, st_lsm9ds0_power_disable, lsm9ds0);
+}
+
+static int st_lsm9ds0_probe_accel(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
+{
+	const struct st_sensor_settings *settings;
+	struct device *dev = lsm9ds0->dev;
+	struct st_sensor_data *data;
+
+	settings = st_accel_get_settings(lsm9ds0->name);
+	if (!settings) {
+		dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name);
+		return -ENODEV;
+	}
+
+	lsm9ds0->accel = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!lsm9ds0->accel)
+		return -ENOMEM;
+
+	lsm9ds0->accel->name = lsm9ds0->name;
+
+	data = iio_priv(lsm9ds0->accel);
+	data->sensor_settings = (struct st_sensor_settings *)settings;
+	data->dev = dev;
+	data->irq = lsm9ds0->irq;
+	data->regmap = regmap;
+	data->vdd = lsm9ds0->vdd;
+	data->vdd_io = lsm9ds0->vdd_io;
+
+	return st_accel_common_probe(lsm9ds0->accel);
+}
+
+static int st_lsm9ds0_probe_magn(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
+{
+	const struct st_sensor_settings *settings;
+	struct device *dev = lsm9ds0->dev;
+	struct st_sensor_data *data;
+
+	settings = st_magn_get_settings(lsm9ds0->name);
+	if (!settings) {
+		dev_err(dev, "device name %s not recognized.\n", lsm9ds0->name);
+		return -ENODEV;
+	}
+
+	lsm9ds0->magn = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!lsm9ds0->magn)
+		return -ENOMEM;
+
+	lsm9ds0->magn->name = lsm9ds0->name;
+
+	data = iio_priv(lsm9ds0->magn);
+	data->sensor_settings = (struct st_sensor_settings *)settings;
+	data->dev = dev;
+	data->irq = lsm9ds0->irq;
+	data->regmap = regmap;
+	data->vdd = lsm9ds0->vdd;
+	data->vdd_io = lsm9ds0->vdd_io;
+
+	return st_magn_common_probe(lsm9ds0->magn);
+}
+
+int st_lsm9ds0_probe(struct st_lsm9ds0 *lsm9ds0, struct regmap *regmap)
+{
+	int ret;
+
+	ret = devm_st_lsm9ds0_power_enable(lsm9ds0);
+	if (ret)
+		return ret;
+
+	/* Setup accelerometer device */
+	ret = st_lsm9ds0_probe_accel(lsm9ds0, regmap);
+	if (ret)
+		return ret;
+
+	/* Setup magnetometer device */
+	ret = st_lsm9ds0_probe_magn(lsm9ds0, regmap);
+	if (ret)
+		st_accel_common_remove(lsm9ds0->accel);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(st_lsm9ds0_probe);
+
+int st_lsm9ds0_remove(struct st_lsm9ds0 *lsm9ds0)
+{
+	st_magn_common_remove(lsm9ds0->magn);
+	st_accel_common_remove(lsm9ds0->accel);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(st_lsm9ds0_remove);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU core driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_i2c.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics LSM9DS0 IMU driver
+ *
+ * Copyright (C) 2021, Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <linux/iio/common/st_sensors_i2c.h>
+
+#include "st_lsm9ds0.h"
+
+static const struct of_device_id st_lsm9ds0_of_match[] = {
+	{
+		.compatible = "st,lsm9ds0-imu",
+		.data = LSM9DS0_IMU_DEV_NAME,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
+
+static const struct i2c_device_id st_lsm9ds0_id_table[] = {
+	{ LSM9DS0_IMU_DEV_NAME },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, st_lsm9ds0_id_table);
+
+static const struct regmap_config st_lsm9ds0_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.read_flag_mask	= 0x80,
+};
+
+static int st_lsm9ds0_i2c_probe(struct i2c_client *client)
+{
+	const struct regmap_config *config = &st_lsm9ds0_regmap_config;
+	struct device *dev = &client->dev;
+	struct st_lsm9ds0 *lsm9ds0;
+	struct regmap *regmap;
+
+	st_sensors_dev_name_probe(dev, client->name, sizeof(client->name));
+
+	lsm9ds0 = devm_kzalloc(dev, sizeof(*lsm9ds0), GFP_KERNEL);
+	if (!lsm9ds0)
+		return -ENOMEM;
+
+	lsm9ds0->dev = dev;
+	lsm9ds0->name = client->name;
+	lsm9ds0->irq = client->irq;
+
+	regmap = devm_regmap_init_i2c(client, config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	i2c_set_clientdata(client, lsm9ds0);
+
+	return st_lsm9ds0_probe(lsm9ds0, regmap);
+}
+
+static int st_lsm9ds0_i2c_remove(struct i2c_client *client)
+{
+	return st_lsm9ds0_remove(i2c_get_clientdata(client));
+}
+
+static struct i2c_driver st_lsm9ds0_driver = {
+	.driver = {
+		.name = "st-lsm9ds0-i2c",
+		.of_match_table = st_lsm9ds0_of_match,
+	},
+	.probe_new = st_lsm9ds0_i2c_probe,
+	.remove = st_lsm9ds0_i2c_remove,
+	.id_table = st_lsm9ds0_id_table,
+};
+module_i2c_driver(st_lsm9ds0_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU I2C driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_spi.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics LSM9DS0 IMU driver
+ *
+ * Copyright (C) 2021, Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/common/st_sensors_spi.h>
+
+#include "st_lsm9ds0.h"
+
+static const struct of_device_id st_lsm9ds0_of_match[] = {
+	{
+		.compatible = "st,lsm9ds0-imu",
+		.data = LSM9DS0_IMU_DEV_NAME,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, st_lsm9ds0_of_match);
+
+static const struct spi_device_id st_lsm9ds0_id_table[] = {
+	{ LSM9DS0_IMU_DEV_NAME },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, st_lsm9ds0_id_table);
+
+static const struct regmap_config st_lsm9ds0_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.read_flag_mask	= 0xc0,
+};
+
+static int st_lsm9ds0_spi_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct st_lsm9ds0 *lsm9ds0;
+	struct regmap *regmap;
+
+	st_sensors_dev_name_probe(dev, spi->modalias, sizeof(spi->modalias));
+
+	lsm9ds0 = devm_kzalloc(dev, sizeof(*lsm9ds0), GFP_KERNEL);
+	if (!lsm9ds0)
+		return -ENOMEM;
+
+	lsm9ds0->dev = dev;
+	lsm9ds0->name = spi->modalias;
+	lsm9ds0->irq = spi->irq;
+
+	regmap = devm_regmap_init_spi(spi, &st_lsm9ds0_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	spi_set_drvdata(spi, lsm9ds0);
+
+	return st_lsm9ds0_probe(lsm9ds0, regmap);
+}
+
+static int st_lsm9ds0_spi_remove(struct spi_device *spi)
+{
+	return st_lsm9ds0_remove(spi_get_drvdata(spi));
+}
+
+static struct spi_driver st_lsm9ds0_driver = {
+	.driver = {
+		.name = "st-lsm9ds0-spi",
+		.of_match_table = st_lsm9ds0_of_match,
+	},
+	.probe = st_lsm9ds0_spi_probe,
+	.remove = st_lsm9ds0_spi_remove,
+	.id_table = st_lsm9ds0_id_table,
+};
+module_spi_driver(st_lsm9ds0_driver);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_DESCRIPTION("STMicroelectronics LSM9DS0 IMU SPI driver");
+MODULE_LICENSE("GPL v2");

drivers/iio/magnetometer/st_magn_core.c

@@ -33,6 +33,7 @@
 /* FULLSCALE */
 #define ST_MAGN_FS_AVL_1300MG			1300
 #define ST_MAGN_FS_AVL_1900MG			1900
+#define ST_MAGN_FS_AVL_2000MG			2000
 #define ST_MAGN_FS_AVL_2500MG			2500
 #define ST_MAGN_FS_AVL_4000MG			4000
 #define ST_MAGN_FS_AVL_4700MG			4700
@@ -53,6 +54,11 @@
 #define ST_MAGN_3_OUT_Y_L_ADDR			0x6a
 #define ST_MAGN_3_OUT_Z_L_ADDR			0x6c
 
+/* Special L addresses for sensor 4 */
+#define ST_MAGN_4_OUT_X_L_ADDR			0x08
+#define ST_MAGN_4_OUT_Y_L_ADDR			0x0a
+#define ST_MAGN_4_OUT_Z_L_ADDR			0x0c
+
 static const struct iio_chan_spec st_magn_16bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -101,6 +107,22 @@ static const struct iio_chan_spec st_magn_3_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
+static const struct iio_chan_spec st_magn_4_16bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_MAGN_4_OUT_X_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_MAGN_4_OUT_Y_L_ADDR),
+	ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_MAGN_4_OUT_Z_L_ADDR),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
 static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	{
 		.wai = 0, /* This sensor has no valid WhoAmI report 0 */
@@ -381,6 +403,82 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
+	{
+		.wai = 0x49,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LSM9DS0_IMU_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_magn_4_16bit_channels,
+		.odr = {
+			.addr = 0x24,
+			.mask = GENMASK(4, 2),
+			.odr_avl = {
+				{ 3, 0x00, },
+				{ 6, 0x01, },
+				{ 12, 0x02, },
+				{ 25, 0x03, },
+				{ 50, 0x04, },
+				{ 100, 0x05, },
+			},
+		},
+		.pw = {
+			.addr = 0x26,
+			.mask = GENMASK(1, 0),
+			.value_on = 0x00,
+			.value_off = 0x03,
+		},
+		.fs = {
+			.addr = 0x25,
+			.mask = GENMASK(6, 5),
+			.fs_avl = {
+				[0] = {
+					.num = ST_MAGN_FS_AVL_2000MG,
+					.value = 0x00,
+					.gain = 73,
+				},
+				[1] = {
+					.num = ST_MAGN_FS_AVL_4000MG,
+					.value = 0x01,
+					.gain = 146,
+				},
+				[2] = {
+					.num = ST_MAGN_FS_AVL_8000MG,
+					.value = 0x02,
+					.gain = 292,
+				},
+				[3] = {
+					.num = ST_MAGN_FS_AVL_12000MG,
+					.value = 0x03,
+					.gain = 438,
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x20,
+			.mask = BIT(3),
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x22,
+				.mask = BIT(1),
+			},
+			.int2 = {
+				.addr = 0x23,
+				.mask = BIT(2),
+			},
+			.stat_drdy = {
+				.addr = 0x07,
+				.mask = GENMASK(2, 0),
+			},
+		},
+		.sim = {
+			.addr = 0x21,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
 };
 
 /* Default magn DRDY is available on INT2 pin */

include/linux/iio/common/st_sensors.h

@@ -20,6 +20,8 @@
 
 #include <linux/platform_data/st_sensors_pdata.h>
 
+#define LSM9DS0_IMU_DEV_NAME		"lsm9ds0"
+
 /*
  * Buffer size max case: 2bytes per channel, 3 channels in total +
  *			 8bytes timestamp channel (s64)