Commit 674063c5 authored by Nobuhiro Iwamatsu's avatar Nobuhiro Iwamatsu Committed by Paul Mundt

sh: Add support sh7760fb to sh7763rdp board

Add sh7760fb platform device to sh7763rdp's setup.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent 0a766a6b
......@@ -15,9 +15,11 @@
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/mtd/physmap.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <asm/sh7763rdp.h>
#include <asm/sh_eth.h>
#include <asm/sh7760fb.h>
/* NOR Flash */
static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
......@@ -88,9 +90,58 @@ static struct platform_device sh7763rdp_eth_device = {
},
};
/* SH7763 LCDC */
static struct resource sh7763rdp_fb_resources[] = {
{
.start = 0xFFE80000,
.end = 0xFFE80442 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct fb_videomode sh7763fb_videomode = {
.refresh = 60,
.name = "VGA Monitor",
.xres = 640,
.yres = 480,
.pixclock = 10000,
.left_margin = 80,
.right_margin = 24,
.upper_margin = 30,
.lower_margin = 1,
.hsync_len = 96,
.vsync_len = 1,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
.flag = FBINFO_FLAG_DEFAULT,
};
static struct sh7760fb_platdata sh7763fb_def_pdata = {
.def_mode = &sh7763fb_videomode,
.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
.lddfr = LDDFR_16BPP_RGB565,
.ldpmmr = 0x0000,
.ldpspr = 0xFFFF,
.ldaclnr = 0x0001,
.ldickr = 0x1102,
.rotate = 0,
.novsync = 0,
.blank = NULL,
};
static struct platform_device sh7763rdp_fb_device = {
.name = "sh7760-lcdc",
.resource = sh7763rdp_fb_resources,
.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
.dev = {
.platform_data = &sh7763fb_def_pdata,
},
};
static struct platform_device *sh7763rdp_devices[] __initdata = {
&sh7763rdp_nor_flash_device,
&sh7763rdp_eth_device,
&sh7763rdp_fb_device,
};
static int __init sh7763rdp_devices_setup(void)
......@@ -98,7 +149,6 @@ static int __init sh7763rdp_devices_setup(void)
return platform_add_devices(sh7763rdp_devices,
ARRAY_SIZE(sh7763rdp_devices));
}
device_initcall(sh7763rdp_devices_setup);
static void __init sh7763rdp_setup(char **cmdline_p)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment