V4L/DVB (13019): video: initial support for ADV7180

This is an initial driver for Analog Devices ADV7180 Video Decoder.
So far it only supports query standard.

[akpm@linux-foundation.org: remove unneeded cast]
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/Kconfig

@@ -265,6 +265,15 @@ config VIDEO_SAA6588
 
 comment "Video decoders"
 
+config VIDEO_ADV7180
+	tristate "Analog Devices ADV7180 decoder"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Analog Devices ADV7180 video decoder.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adv7180.
+
 config VIDEO_BT819
 	tristate "BT819A VideoStream decoder"
 	depends on VIDEO_V4L2 && I2C

drivers/media/video/Makefile

@@ -45,6 +45,7 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
 obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
 obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
 obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o
+obj-$(CONFIG_VIDEO_ADV7180) += adv7180.o
 obj-$(CONFIG_VIDEO_ADV7343) += adv7343.o
 obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o
 obj-$(CONFIG_VIDEO_BT819) += bt819.o

drivers/media/video/adv7180.c

+/*
+ * adv7180.c Analog Devices ADV7180 video decoder driver
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <media/v4l2-ioctl.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#define DRIVER_NAME "adv7180"
+
+#define ADV7180_INPUT_CONTROL_REG	0x00
+#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM	0x00
+#define ADV7180_AUTODETECT_ENABLE_REG	0x07
+#define ADV7180_AUTODETECT_DEFAULT	0x7f
+
+
+#define ADV7180_STATUS1_REG 0x10
+#define ADV7180_STATUS1_AUTOD_MASK 0x70
+#define ADV7180_STATUS1_AUTOD_NTSM_M_J	0x00
+#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
+#define ADV7180_STATUS1_AUTOD_PAL_M	0x20
+#define ADV7180_STATUS1_AUTOD_PAL_60	0x30
+#define ADV7180_STATUS1_AUTOD_PAL_B_G	0x40
+#define ADV7180_STATUS1_AUTOD_SECAM	0x50
+#define ADV7180_STATUS1_AUTOD_PAL_COMB	0x60
+#define ADV7180_STATUS1_AUTOD_SECAM_525	0x70
+
+#define ADV7180_IDENT_REG 0x11
+#define ADV7180_ID_7180 0x18
+
+
+struct adv7180_state {
+	struct v4l2_subdev sd;
+};
+
+static v4l2_std_id determine_norm(struct i2c_client *client)
+{
+	u8 status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
+
+	switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
+	case ADV7180_STATUS1_AUTOD_NTSM_M_J:
+		return V4L2_STD_NTSC_M_JP;
+	case ADV7180_STATUS1_AUTOD_NTSC_4_43:
+		return V4L2_STD_NTSC_443;
+	case ADV7180_STATUS1_AUTOD_PAL_M:
+		return V4L2_STD_PAL_M;
+	case ADV7180_STATUS1_AUTOD_PAL_60:
+		return V4L2_STD_PAL_60;
+	case ADV7180_STATUS1_AUTOD_PAL_B_G:
+		return V4L2_STD_PAL;
+	case ADV7180_STATUS1_AUTOD_SECAM:
+		return V4L2_STD_SECAM;
+	case ADV7180_STATUS1_AUTOD_PAL_COMB:
+		return V4L2_STD_PAL_Nc | V4L2_STD_PAL_N;
+	case ADV7180_STATUS1_AUTOD_SECAM_525:
+		return V4L2_STD_SECAM;
+	default:
+		return V4L2_STD_UNKNOWN;
+	}
+}
+
+static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct adv7180_state, sd);
+}
+
+static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	*std = determine_norm(client);
+	return 0;
+}
+
+static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
+	struct v4l2_dbg_chip_ident *chip)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
+}
+
+static const struct v4l2_subdev_video_ops adv7180_video_ops = {
+	.querystd = adv7180_querystd,
+};
+
+static const struct v4l2_subdev_core_ops adv7180_core_ops = {
+	.g_chip_ident = adv7180_g_chip_ident,
+};
+
+static const struct v4l2_subdev_ops adv7180_ops = {
+	.core = &adv7180_core_ops,
+	.video = &adv7180_video_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int adv7180_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct adv7180_state *state;
+	struct v4l2_subdev *sd;
+	int ret;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+			client->addr << 1, client->adapter->name);
+
+	state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
+	if (state == NULL)
+		return -ENOMEM;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
+
+	/* Initialize adv7180 */
+	/* enable autodetection */
+	ret = i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+		ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM);
+	if (ret > 0)
+		ret = i2c_smbus_write_byte_data(client,
+			ADV7180_AUTODETECT_ENABLE_REG,
+			ADV7180_AUTODETECT_DEFAULT);
+	if (ret < 0) {
+		printk(KERN_ERR DRIVER_NAME
+			": Failed to communicate to chip: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int adv7180_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+	v4l2_device_unregister_subdev(sd);
+	kfree(to_state(sd));
+	return 0;
+}
+
+static const struct i2c_device_id adv7180_id[] = {
+	{DRIVER_NAME, 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, adv7180_id);
+
+static struct i2c_driver adv7180_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRIVER_NAME,
+	},
+	.probe		= adv7180_probe,
+	.remove		= adv7180_remove,
+	.id_table	= adv7180_id,
+};
+
+static __init int adv7180_init(void)
+{
+	return i2c_add_driver(&adv7180_driver);
+}
+
+static __exit void adv7180_exit(void)
+{
+	i2c_del_driver(&adv7180_driver);
+}
+
+module_init(adv7180_init);
+module_exit(adv7180_exit);
+
+MODULE_DESCRIPTION("Analog Devices ADV7180 video decoder driver");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
+

include/media/v4l2-chip-ident.h

@@ -135,6 +135,9 @@ enum {
 	/* module adv7175: just ident 7175 */
 	V4L2_IDENT_ADV7175 = 7175,
 
+	/* module adv7180: just ident 7180 */
+	V4L2_IDENT_ADV7180 = 7180,
+
 	/* module saa7185: just ident 7185 */
 	V4L2_IDENT_SAA7185 = 7185,