Merge tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC fixes from Arnd Bergmann:
 "The device tree changes this time are all for NXP i.MX platforms,
  addressing issues with clocks and regulators on i.MX7 and i.MX8.

  The old OMAP2 based Nokia N8x0 tablet get a couple of code fixes for
  regressions that came in.

  The ARM SCMI and FF-A firmware interfaces get a couple of minor bug
  fixes.

  A regression fix for RISC-V cache management addresses a problem with
  probe order on Sifive cores"

* tag 'soc-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
  MAINTAINERS: Change Krzysztof Kozlowski's email address
  arm64: dts: imx8qm-ss-dma: fix can lpcg indices
  arm64: dts: imx8-ss-dma: fix can lpcg indices
  arm64: dts: imx8-ss-dma: fix adc lpcg indices
  arm64: dts: imx8-ss-dma: fix pwm lpcg indices
  arm64: dts: imx8-ss-dma: fix spi lpcg indices
  arm64: dts: imx8-ss-conn: fix usb lpcg indices
  arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
  ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
  ARM: dts: imx7-mba7: Use 'no-mmc' property
  arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
  arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
  arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
  cache: sifive_ccache: Partially convert to a platform driver
  firmware: arm_scmi: Make raw debugfs entries non-seekable
  firmware: arm_scmi: Fix wrong fastchannel initialization
  firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
  ARM: OMAP2+: fix USB regression on Nokia N8x0
  mmc: omap: restore original power up/down steps
  mmc: omap: fix deferred probe
  ...

MAINTAINERS

@@ -2707,7 +2707,7 @@ F:	sound/soc/rockchip/
 N:	rockchip
 
 ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org
@@ -5555,7 +5555,7 @@ F:	drivers/cpuidle/cpuidle-big_little.c
 CPUIDLE DRIVER - ARM EXYNOS
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 M:	Kukjin Kim <kgene@kernel.org>
-R:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+R:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
@@ -8994,7 +8994,7 @@ F:	drivers/i2c/muxes/i2c-mux-gpio.c
 F:	include/linux/platform_data/i2c-mux-gpio.h
 
 GENERIC GPIO RESET DRIVER
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 S:	Maintained
 F:	drivers/reset/reset-gpio.c
 
@@ -13289,7 +13289,7 @@ F:	drivers/iio/adc/max11205.c
 
 MAXIM MAX17040 FAMILY FUEL GAUGE DRIVERS
 R:	Iskren Chernev <iskren.chernev@gmail.com>
-R:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+R:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Marek Szyprowski <m.szyprowski@samsung.com>
 R:	Matheus Castello <matheus@castello.eng.br>
 L:	linux-pm@vger.kernel.org
@@ -13299,7 +13299,7 @@ F:	drivers/power/supply/max17040_battery.c
 
 MAXIM MAX17042 FAMILY FUEL GAUGE DRIVERS
 R:	Hans de Goede <hdegoede@redhat.com>
-R:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+R:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Marek Szyprowski <m.szyprowski@samsung.com>
 R:	Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
 R:	Purism Kernel Team <kernel@puri.sm>
@@ -13357,7 +13357,7 @@ F:	Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
 F:	drivers/power/supply/max77976_charger.c
 
 MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 B:	mailto:linux-samsung-soc@vger.kernel.org
@@ -13368,7 +13368,7 @@ F:	drivers/power/supply/max77693_charger.c
 
 MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
 M:	Chanwoo Choi <cw00.choi@samsung.com>
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 B:	mailto:linux-samsung-soc@vger.kernel.org
@@ -14152,7 +14152,7 @@ F:	mm/mm_init.c
 F:	tools/testing/memblock/
 
 MEMORY CONTROLLER DRIVERS
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 B:	mailto:krzysztof.kozlowski@linaro.org
@@ -15533,7 +15533,7 @@ F:	include/uapi/linux/nexthop.h
 F:	net/ipv4/nexthop.c
 
 NFC SUBSYSTEM
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/nfc/
@@ -15910,7 +15910,7 @@ F:	Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
 F:	drivers/regulator/pf8x00-regulator.c
 
 NXP PTN5150A CC LOGIC AND EXTCON DRIVER
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -16521,7 +16521,7 @@ K:	of_overlay_remove
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <robh@kernel.org>
-M:	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
+M:	Krzysztof Kozlowski <krzk+dt@kernel.org>
 M:	Conor Dooley <conor+dt@kernel.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
@@ -17478,7 +17478,7 @@ F:	Documentation/devicetree/bindings/pinctrl/renesas,*
 F:	drivers/pinctrl/renesas/
 
 PIN CONTROLLER - SAMSUNG
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -19446,7 +19446,7 @@ F:	Documentation/devicetree/bindings/sound/samsung*
 F:	sound/soc/samsung/
 
 SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-crypto@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
@@ -19481,7 +19481,7 @@ S:	Maintained
 F:	drivers/platform/x86/samsung-laptop.c
 
 SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
@@ -19507,7 +19507,7 @@ F:	drivers/media/platform/samsung/s3c-camif/
 F:	include/media/drv-intf/s3c_camif.h
 
 SAMSUNG S3FWRN5 NFC DRIVER
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
 F:	drivers/nfc/s3fwrn5
@@ -19528,7 +19528,7 @@ S:	Supported
 F:	drivers/media/i2c/s5k5baf.c
 
 SAMSUNG S5P Security SubSystem (SSS) DRIVER
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Vladimir Zapolskiy <vz@mleia.com>
 L:	linux-crypto@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
@@ -19550,7 +19550,7 @@ F:	Documentation/devicetree/bindings/media/samsung,fimc.yaml
 F:	drivers/media/platform/samsung/exynos4-is/
 
 SAMSUNG SOC CLOCK DRIVERS
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 M:	Chanwoo Choi <cw00.choi@samsung.com>
 R:	Alim Akhtar <alim.akhtar@samsung.com>
@@ -19582,7 +19582,7 @@ F:	drivers/net/ethernet/samsung/sxgbe/
 
 SAMSUNG THERMAL DRIVER
 M:	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
@@ -23779,7 +23779,7 @@ S:	Orphan
 F:	drivers/mmc/host/vub300.c
 
 W1 DALLAS'S 1-WIRE BUS
-M:	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+M:	Krzysztof Kozlowski <krzk@kernel.org>
 S:	Maintained
 F:	Documentation/devicetree/bindings/w1/
 F:	Documentation/w1/

arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi

@@ -666,7 +666,7 @@ &usdhc1 {
 	bus-width = <4>;
 	no-1-8-v;
 	no-sdio;
-	no-emmc;
+	no-mmc;
 	status = "okay";
 };
 

arch/arm/boot/dts/nxp/imx/imx7s-warp.dts

@@ -210,6 +210,7 @@ ov2680_to_mipi: endpoint {
 				remote-endpoint = <&mipi_from_sensor>;
 				clock-lanes = <0>;
 				data-lanes = <1>;
+				link-frequencies = /bits/ 64 <330000000>;
 			};
 		};
 	};

arch/arm/mach-omap2/board-n8x0.c

@@ -79,10 +79,8 @@ static struct musb_hdrc_platform_data tusb_data = {
 static struct gpiod_lookup_table tusb_gpio_table = {
 	.dev_id = "musb-tusb",
 	.table = {
-		GPIO_LOOKUP("gpio-0-15", 0, "enable",
-			    GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-48-63", 10, "int",
-			    GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-0-31", 0, "enable", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-32-63", 26, "int", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -140,12 +138,11 @@ static int slot1_cover_open;
 static int slot2_cover_open;
 static struct device *mmc_device;
 
-static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
+static struct gpiod_lookup_table nokia800_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
 		/* Slot switch, GPIO 96 */
-		GPIO_LOOKUP("gpio-80-111", 16,
-			    "switch", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -153,12 +150,12 @@ static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = {
 static struct gpiod_lookup_table nokia810_mmc_gpio_table = {
 	.dev_id = "mmci-omap.0",
 	.table = {
+		/* Slot switch, GPIO 96 */
+		GPIO_LOOKUP("gpio-96-127", 0, "switch", GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VSD power, GPIO 23 */
-		GPIO_LOOKUP_IDX("gpio-16-31", 7,
-				"vsd", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 23, "vsd", 1, GPIO_ACTIVE_HIGH),
 		/* Slot index 1, VIO power, GPIO 9 */
-		GPIO_LOOKUP_IDX("gpio-0-15", 9,
-				"vio", 1, GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP_IDX("gpio-0-31", 9, "vio", 1, GPIO_ACTIVE_HIGH),
 		{ }
 	},
 };
@@ -415,8 +412,6 @@ static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
 static void __init n8x0_mmc_init(void)
 {
-	gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table);
-
 	if (board_is_n810()) {
 		mmc1_data.slots[0].name = "external";
 
@@ -429,6 +424,8 @@ static void __init n8x0_mmc_init(void)
 		mmc1_data.slots[1].name = "internal";
 		mmc1_data.slots[1].ban_openended = 1;
 		gpiod_add_lookup_table(&nokia810_mmc_gpio_table);
+	} else {
+		gpiod_add_lookup_table(&nokia800_mmc_gpio_table);
 	}
 
 	mmc1_data.nr_slots = 2;

arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi

@@ -41,7 +41,7 @@ usbotg1: usb@5b0d0000 {
 		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,usbphy = <&usbphy1>;
 		fsl,usbmisc = <&usbmisc1 0>;
-		clocks = <&usb2_lpcg 0>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>;
 		rx-burst-size-dword = <0x10>;
@@ -58,7 +58,7 @@ usbmisc1: usbmisc@5b0d0200 {
 	usbphy1: usbphy@5b100000 {
 		compatible = "fsl,imx7ulp-usbphy";
 		reg = <0x5b100000 0x1000>;
-		clocks = <&usb2_lpcg 1>;
+		clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
 		power-domains = <&pd IMX_SC_R_USB_0_PHY>;
 		status = "disabled";
 	};
@@ -67,8 +67,8 @@ usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
@@ -78,8 +78,8 @@ usdhc2: mmc@5b020000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
@@ -91,8 +91,8 @@ usdhc3: mmc@5b030000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";

arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi

@@ -28,8 +28,8 @@ lpspi0: spi@5a000000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi0_lpcg 0>,
-			 <&spi0_lpcg 1>;
+		clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
+			 <&spi0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -44,8 +44,8 @@ lpspi1: spi@5a010000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi1_lpcg 0>,
-			 <&spi1_lpcg 1>;
+		clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
+			 <&spi1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -60,8 +60,8 @@ lpspi2: spi@5a020000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi2_lpcg 0>,
-			 <&spi2_lpcg 1>;
+		clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
+			 <&spi2_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -76,8 +76,8 @@ lpspi3: spi@5a030000 {
 		#size-cells = <0>;
 		interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&spi3_lpcg 0>,
-			 <&spi3_lpcg 1>;
+		clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
+			 <&spi3_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <60000000>;
@@ -145,8 +145,8 @@ adma_pwm: pwm@5a190000 {
 		compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
 		reg = <0x5a190000 0x1000>;
 		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&adma_pwm_lpcg 1>,
-			 <&adma_pwm_lpcg 0>;
+		clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+			 <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -355,8 +355,8 @@ adc0: adc@5a880000 {
 		reg = <0x5a880000 0x10000>;
 		interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc0_lpcg 0>,
-			 <&adc0_lpcg 1>;
+		clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+			 <&adc0_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -370,8 +370,8 @@ adc1: adc@5a890000 {
 		reg = <0x5a890000 0x10000>;
 		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&adc1_lpcg 0>,
-			 <&adc1_lpcg 1>;
+		clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+			 <&adc1_lpcg IMX_LPCG_CLK_4>;
 		clock-names = "per", "ipg";
 		assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
@@ -384,8 +384,8 @@ flexcan1: can@5a8d0000 {
 		reg = <0x5a8d0000 0x10000>;
 		interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gic>;
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -405,8 +405,8 @@ flexcan2: can@5a8e0000 {
 		 * CAN1 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;
@@ -426,8 +426,8 @@ flexcan3: can@5a8f0000 {
 		 * CAN2 shares CAN0's clock and to enable CAN0's clock it
 		 * has to be powered on.
 		 */
-		clocks = <&can0_lpcg 1>,
-			 <&can0_lpcg 0>;
+		clocks = <&can0_lpcg IMX_LPCG_CLK_4>,
+			 <&can0_lpcg IMX_LPCG_CLK_0>;
 		clock-names = "ipg", "per";
 		assigned-clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <40000000>;

arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi

@@ -25,8 +25,8 @@ lsio_pwm0: pwm@5d000000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d000000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm0_lpcg 4>,
-			 <&pwm0_lpcg 1>;
+		clocks = <&pwm0_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm0_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -38,8 +38,8 @@ lsio_pwm1: pwm@5d010000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d010000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm1_lpcg 4>,
-			 <&pwm1_lpcg 1>;
+		clocks = <&pwm1_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm1_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -51,8 +51,8 @@ lsio_pwm2: pwm@5d020000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d020000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm2_lpcg 4>,
-			 <&pwm2_lpcg 1>;
+		clocks = <&pwm2_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm2_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;
@@ -64,8 +64,8 @@ lsio_pwm3: pwm@5d030000 {
 		compatible = "fsl,imx27-pwm";
 		reg = <0x5d030000 0x10000>;
 		clock-names = "ipg", "per";
-		clocks = <&pwm3_lpcg 4>,
-			 <&pwm3_lpcg 1>;
+		clocks = <&pwm3_lpcg IMX_LPCG_CLK_6>,
+			 <&pwm3_lpcg IMX_LPCG_CLK_1>;
 		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
 		assigned-clock-rates = <24000000>;
 		#pwm-cells = <3>;

arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi

@@ -14,6 +14,7 @@ connector {
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -183,7 +184,6 @@ &usb3_0 {
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi

@@ -14,6 +14,7 @@ connector {
 		pinctrl-0 = <&pinctrl_usbcon1>;
 		type = "micro";
 		label = "otg";
+		vbus-supply = <&reg_usb1_vbus>;
 		id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -202,7 +203,6 @@ &usb3_0 {
 };
 
 &usb3_phy0 {
-	vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi

@@ -153,15 +153,15 @@ &flexcan1 {
 };
 
 &flexcan2 {
-	clocks = <&can1_lpcg 1>,
-		 <&can1_lpcg 0>;
+	clocks = <&can1_lpcg IMX_LPCG_CLK_4>,
+		 <&can1_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_1 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };
 
 &flexcan3 {
-	clocks = <&can2_lpcg 1>,
-		 <&can2_lpcg 0>;
+	clocks = <&can2_lpcg IMX_LPCG_CLK_4>,
+		 <&can2_lpcg IMX_LPCG_CLK_0>;
 	assigned-clocks = <&clk IMX_SC_R_CAN_2 IMX_SC_PM_CLK_PER>;
 	fsl,clk-source = /bits/ 8 <1>;
 };

drivers/cache/sifive_ccache.c

@@ -15,6 +15,8 @@
 #include <linux/of_address.h>
 #include <linux/device.h>
 #include <linux/bitfield.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <asm/cacheflush.h>
 #include <asm/cacheinfo.h>
 #include <asm/dma-noncoherent.h>
@@ -247,13 +249,49 @@ static irqreturn_t ccache_int_handler(int irq, void *device)
 	return IRQ_HANDLED;
 }
 
+static int sifive_ccache_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned long quirks;
+	int intr_num, rc;
+
+	quirks = (unsigned long)device_get_match_data(dev);
+
+	intr_num = platform_irq_count(pdev);
+	if (!intr_num)
+		return dev_err_probe(dev, -ENODEV, "No interrupts property\n");
+
+	for (int i = 0; i < intr_num; i++) {
+		if (i == DATA_UNCORR && (quirks & QUIRK_BROKEN_DATA_UNCORR))
+			continue;
+
+		g_irq[i] = platform_get_irq(pdev, i);
+		if (g_irq[i] < 0)
+			return g_irq[i];
+
+		rc = devm_request_irq(dev, g_irq[i], ccache_int_handler, 0, "ccache_ecc", NULL);
+		if (rc)
+			return dev_err_probe(dev, rc, "Could not request IRQ %d\n", g_irq[i]);
+	}
+
+	return 0;
+}
+
+static struct platform_driver sifive_ccache_driver = {
+	.probe	= sifive_ccache_probe,
+	.driver	= {
+		.name		= "sifive_ccache",
+		.of_match_table	= sifive_ccache_ids,
+	},
+};
+
 static int __init sifive_ccache_init(void)
 {
 	struct device_node *np;
 	struct resource res;
-	int i, rc, intr_num;
 	const struct of_device_id *match;
 	unsigned long quirks;
+	int rc;
 
 	np = of_find_matching_node_and_match(NULL, sifive_ccache_ids, &match);
 	if (!np)
@@ -277,28 +315,6 @@ static int __init sifive_ccache_init(void)
 		goto err_unmap;
 	}
 
-	intr_num = of_property_count_u32_elems(np, "interrupts");
-	if (!intr_num) {
-		pr_err("No interrupts property\n");
-		rc = -ENODEV;
-		goto err_unmap;
-	}
-
-	for (i = 0; i < intr_num; i++) {
-		g_irq[i] = irq_of_parse_and_map(np, i);
-
-		if (i == DATA_UNCORR && (quirks & QUIRK_BROKEN_DATA_UNCORR))
-			continue;
-
-		rc = request_irq(g_irq[i], ccache_int_handler, 0, "ccache_ecc",
-				 NULL);
-		if (rc) {
-			pr_err("Could not request IRQ %d\n", g_irq[i]);
-			goto err_free_irq;
-		}
-	}
-	of_node_put(np);
-
 #ifdef CONFIG_RISCV_NONSTANDARD_CACHE_OPS
 	if (quirks & QUIRK_NONSTANDARD_CACHE_OPS) {
 		riscv_cbom_block_size = SIFIVE_CCACHE_LINE_SIZE;
@@ -315,11 +331,15 @@ static int __init sifive_ccache_init(void)
 #ifdef CONFIG_DEBUG_FS
 	setup_sifive_debug();
 #endif
+
+	rc = platform_driver_register(&sifive_ccache_driver);
+	if (rc)
+		goto err_unmap;
+
+	of_node_put(np);
+
 	return 0;
 
-err_free_irq:
-	while (--i >= 0)
-		free_irq(g_irq[i], NULL);
 err_unmap:
 	iounmap(ccache_base);
 err_node_put:

drivers/firmware/arm_ffa/driver.c

@@ -790,7 +790,7 @@ static void ffa_notification_info_get(void)
 
 			part_id = packed_id_list[ids_processed++];
 
-			if (!ids_count[list]) { /* Global Notification */
+			if (ids_count[list] == 1) { /* Global Notification */
 				__do_sched_recv_cb(part_id, 0, false);
 				continue;
 			}

drivers/firmware/arm_scmi/powercap.c

@@ -736,7 +736,7 @@ static void scmi_powercap_domain_init_fc(const struct scmi_protocol_handle *ph,
 	ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL,
 				   POWERCAP_PAI_GET, 4, domain,
 				   &fc[POWERCAP_FC_PAI].get_addr, NULL,
-				   &fc[POWERCAP_PAI_GET].rate_limit);
+				   &fc[POWERCAP_FC_PAI].rate_limit);
 
 	*p_fc = fc;
 }

drivers/firmware/arm_scmi/raw_mode.c

@@ -921,7 +921,7 @@ static int scmi_dbg_raw_mode_open(struct inode *inode, struct file *filp)
 	rd->raw = raw;
 	filp->private_data = rd;
 
-	return 0;
+	return nonseekable_open(inode, filp);
 }
 
 static int scmi_dbg_raw_mode_release(struct inode *inode, struct file *filp)
@@ -950,6 +950,7 @@ static const struct file_operations scmi_dbg_raw_mode_reset_fops = {
 	.open = scmi_dbg_raw_mode_open,
 	.release = scmi_dbg_raw_mode_release,
 	.write = scmi_dbg_raw_mode_reset_write,
+	.llseek = no_llseek,
 	.owner = THIS_MODULE,
 };
 
@@ -959,6 +960,7 @@ static const struct file_operations scmi_dbg_raw_mode_message_fops = {
 	.read = scmi_dbg_raw_mode_message_read,
 	.write = scmi_dbg_raw_mode_message_write,
 	.poll = scmi_dbg_raw_mode_message_poll,
+	.llseek = no_llseek,
 	.owner = THIS_MODULE,
 };
 
@@ -975,6 +977,7 @@ static const struct file_operations scmi_dbg_raw_mode_message_async_fops = {
 	.read = scmi_dbg_raw_mode_message_read,
 	.write = scmi_dbg_raw_mode_message_async_write,
 	.poll = scmi_dbg_raw_mode_message_poll,
+	.llseek = no_llseek,
 	.owner = THIS_MODULE,
 };
 
@@ -998,6 +1001,7 @@ static const struct file_operations scmi_dbg_raw_mode_notification_fops = {
 	.release = scmi_dbg_raw_mode_release,
 	.read = scmi_test_dbg_raw_mode_notif_read,
 	.poll = scmi_test_dbg_raw_mode_notif_poll,
+	.llseek = no_llseek,
 	.owner = THIS_MODULE,
 };
 
@@ -1021,6 +1025,7 @@ static const struct file_operations scmi_dbg_raw_mode_errors_fops = {
 	.release = scmi_dbg_raw_mode_release,
 	.read = scmi_test_dbg_raw_mode_errors_read,
 	.poll = scmi_test_dbg_raw_mode_errors_poll,
+	.llseek = no_llseek,
 	.owner = THIS_MODULE,
 };
 

drivers/mmc/host/omap.c

@@ -1114,10 +1114,25 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on,
 
 	host = slot->host;
 
-	if (slot->vsd)
-		gpiod_set_value(slot->vsd, power_on);
-	if (slot->vio)
-		gpiod_set_value(slot->vio, power_on);
+	if (power_on) {
+		if (slot->vsd) {
+			gpiod_set_value(slot->vsd, power_on);
+			msleep(1);
+		}
+		if (slot->vio) {
+			gpiod_set_value(slot->vio, power_on);
+			msleep(1);
+		}
+	} else {
+		if (slot->vio) {
+			gpiod_set_value(slot->vio, power_on);
+			msleep(50);
+		}
+		if (slot->vsd) {
+			gpiod_set_value(slot->vsd, power_on);
+			msleep(50);
+		}
+	}
 
 	if (slot->pdata->set_power != NULL)
 		slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on,
@@ -1254,18 +1269,18 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	slot->pdata = &host->pdata->slots[id];
 
 	/* Check for some optional GPIO controls */
-	slot->vsd = gpiod_get_index_optional(host->dev, "vsd",
-					     id, GPIOD_OUT_LOW);
+	slot->vsd = devm_gpiod_get_index_optional(host->dev, "vsd",
+						  id, GPIOD_OUT_LOW);
 	if (IS_ERR(slot->vsd))
 		return dev_err_probe(host->dev, PTR_ERR(slot->vsd),
 				     "error looking up VSD GPIO\n");
-	slot->vio = gpiod_get_index_optional(host->dev, "vio",
-					     id, GPIOD_OUT_LOW);
+	slot->vio = devm_gpiod_get_index_optional(host->dev, "vio",
+						  id, GPIOD_OUT_LOW);
 	if (IS_ERR(slot->vio))
 		return dev_err_probe(host->dev, PTR_ERR(slot->vio),
 				     "error looking up VIO GPIO\n");
-	slot->cover = gpiod_get_index_optional(host->dev, "cover",
-						id, GPIOD_IN);
+	slot->cover = devm_gpiod_get_index_optional(host->dev, "cover",
+						    id, GPIOD_IN);
 	if (IS_ERR(slot->cover))
 		return dev_err_probe(host->dev, PTR_ERR(slot->cover),
 				     "error looking up cover switch GPIO\n");
@@ -1379,13 +1394,6 @@ static int mmc_omap_probe(struct platform_device *pdev)
 	if (IS_ERR(host->virt_base))
 		return PTR_ERR(host->virt_base);
 
-	host->slot_switch = gpiod_get_optional(host->dev, "switch",
-					       GPIOD_OUT_LOW);
-	if (IS_ERR(host->slot_switch))
-		return dev_err_probe(host->dev, PTR_ERR(host->slot_switch),
-				     "error looking up slot switch GPIO\n");
-
-
 	INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
 	INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
 
@@ -1404,6 +1412,12 @@ static int mmc_omap_probe(struct platform_device *pdev)
 	host->dev = &pdev->dev;
 	platform_set_drvdata(pdev, host);
 
+	host->slot_switch = devm_gpiod_get_optional(host->dev, "switch",
+						    GPIOD_OUT_LOW);
+	if (IS_ERR(host->slot_switch))
+		return dev_err_probe(host->dev, PTR_ERR(host->slot_switch),
+				     "error looking up slot switch GPIO\n");
+
 	host->id = pdev->id;
 	host->irq = irq;
 	host->phys_base = res->start;