Commit 67905540 authored by Maxime Ripard's avatar Maxime Ripard Committed by Daniel Lezcano

clocksource: Add Allwinner SoCs HS timers driver

Most of the Allwinner SoCs (at this time, all but the A10) also have a
High Speed timers that are not using the 24MHz oscillator as a source
but rather the AHB clock running much faster.

The IP is slightly different between the A10s/A13 and the one used in
the A20/A31, since the latter have 4 timers available, while the former
have only 2 of them.

[dlezcano] : Fixed conflict with b788beda "Order Kconfig options
		alphabetically"
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: default avatarEmilio López <emilio@elopez.com.ar>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
parent 5df9affb
Allwinner SoCs High Speed Timer Controller
Required properties:
- compatible : should be "allwinner,sun5i-a13-hstimer" or
"allwinner,sun7i-a20-hstimer"
- reg : Specifies base physical address and size of the registers.
- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i
one)
- clocks: phandle to the source clock (usually the AHB clock)
Example:
timer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <0 51 1>,
<0 52 1>,
<0 53 1>,
<0 54 1>;
clocks = <&ahb1_gates 19>;
};
......@@ -12,3 +12,4 @@ config ARCH_SUNXI
select PINCTRL_SUNXI
select SPARSE_IRQ
select SUN4I_TIMER
select SUN5I_HSTIMER
......@@ -37,6 +37,10 @@ config SUN4I_TIMER
select CLKSRC_MMIO
bool
config SUN5I_HSTIMER
select CLKSRC_MMIO
bool
config VT8500_TIMER
bool
......
......@@ -22,6 +22,7 @@ obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
......
/*
* Allwinner SoCs hstimer driver.
*
* Copyright (C) 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqreturn.h>
#include <linux/sched_clock.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#define TIMER_IRQ_EN_REG 0x00
#define TIMER_IRQ_EN(val) BIT(val)
#define TIMER_IRQ_ST_REG 0x04
#define TIMER_CTL_REG(val) (0x20 * (val) + 0x10)
#define TIMER_CTL_ENABLE BIT(0)
#define TIMER_CTL_RELOAD BIT(1)
#define TIMER_CTL_CLK_PRES(val) (((val) & 0x7) << 4)
#define TIMER_CTL_ONESHOT BIT(7)
#define TIMER_INTVAL_LO_REG(val) (0x20 * (val) + 0x14)
#define TIMER_INTVAL_HI_REG(val) (0x20 * (val) + 0x18)
#define TIMER_CNTVAL_LO_REG(val) (0x20 * (val) + 0x1c)
#define TIMER_CNTVAL_HI_REG(val) (0x20 * (val) + 0x20)
#define TIMER_SYNC_TICKS 3
static void __iomem *timer_base;
static u32 ticks_per_jiffy;
/*
* When we disable a timer, we need to wait at least for 2 cycles of
* the timer source clock. We will use for that the clocksource timer
* that is already setup and runs at the same frequency than the other
* timers, and we never will be disabled.
*/
static void sun5i_clkevt_sync(void)
{
u32 old = readl(timer_base + TIMER_CNTVAL_LO_REG(1));
while ((old - readl(timer_base + TIMER_CNTVAL_LO_REG(1))) < TIMER_SYNC_TICKS)
cpu_relax();
}
static void sun5i_clkevt_time_stop(u8 timer)
{
u32 val = readl(timer_base + TIMER_CTL_REG(timer));
writel(val & ~TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG(timer));
sun5i_clkevt_sync();
}
static void sun5i_clkevt_time_setup(u8 timer, u32 delay)
{
writel(delay, timer_base + TIMER_INTVAL_LO_REG(timer));
}
static void sun5i_clkevt_time_start(u8 timer, bool periodic)
{
u32 val = readl(timer_base + TIMER_CTL_REG(timer));
if (periodic)
val &= ~TIMER_CTL_ONESHOT;
else
val |= TIMER_CTL_ONESHOT;
writel(val | TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
timer_base + TIMER_CTL_REG(timer));
}
static void sun5i_clkevt_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
sun5i_clkevt_time_stop(0);
sun5i_clkevt_time_setup(0, ticks_per_jiffy);
sun5i_clkevt_time_start(0, true);
break;
case CLOCK_EVT_MODE_ONESHOT:
sun5i_clkevt_time_stop(0);
sun5i_clkevt_time_start(0, false);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
sun5i_clkevt_time_stop(0);
break;
}
}
static int sun5i_clkevt_next_event(unsigned long evt,
struct clock_event_device *unused)
{
sun5i_clkevt_time_stop(0);
sun5i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
sun5i_clkevt_time_start(0, false);
return 0;
}
static struct clock_event_device sun5i_clockevent = {
.name = "sun5i_tick",
.rating = 340,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sun5i_clkevt_mode,
.set_next_event = sun5i_clkevt_next_event,
};
static irqreturn_t sun5i_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = (struct clock_event_device *)dev_id;
writel(0x1, timer_base + TIMER_IRQ_ST_REG);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction sun5i_timer_irq = {
.name = "sun5i_timer0",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = sun5i_timer_interrupt,
.dev_id = &sun5i_clockevent,
};
static u32 sun5i_timer_sched_read(void)
{
return ~readl(timer_base + TIMER_CNTVAL_LO_REG(1));
}
static void __init sun5i_timer_init(struct device_node *node)
{
unsigned long rate;
struct clk *clk;
int ret, irq;
u32 val;
timer_base = of_iomap(node, 0);
if (!timer_base)
panic("Can't map registers");
irq = irq_of_parse_and_map(node, 0);
if (irq <= 0)
panic("Can't parse IRQ");
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
panic("Can't get timer clock");
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
timer_base + TIMER_CTL_REG(1));
setup_sched_clock(sun5i_timer_sched_read, 32, rate);
clocksource_mmio_init(timer_base + TIMER_CNTVAL_LO_REG(1), node->name,
rate, 340, 32, clocksource_mmio_readl_down);
ticks_per_jiffy = DIV_ROUND_UP(rate, HZ);
ret = setup_irq(irq, &sun5i_timer_irq);
if (ret)
pr_warn("failed to setup irq %d\n", irq);
/* Enable timer0 interrupt */
val = readl(timer_base + TIMER_IRQ_EN_REG);
writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
sun5i_clockevent.cpumask = cpu_possible_mask;
sun5i_clockevent.irq = irq;
clockevents_config_and_register(&sun5i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);
}
CLOCKSOURCE_OF_DECLARE(sun5i_a13, "allwinner,sun5i-a13-hstimer",
sun5i_timer_init);
CLOCKSOURCE_OF_DECLARE(sun7i_a20, "allwinner,sun7i-a20-hstimer",
sun5i_timer_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment