Commit 67c3bf6f authored by Deepak S's avatar Deepak S Committed by Daniel Vetter

drm/i915: populate mem_freq/cz_clock for chv

We need mem_freq or cz clock for freq/opcode conversion
Signed-off-by: default avatarDeepak S <deepak.s@linux.intel.com>
Reviewed-by: default avatarMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 74c4f62b
......@@ -931,6 +931,7 @@ struct intel_gen6_power_mgmt {
u8 efficient_freq; /* AKA RPe. Pre-determined balanced frequency */
u8 rp1_freq; /* "less than" RP0 power/freqency */
u8 rp0_freq; /* Non-overclocked max frequency. */
u32 cz_freq;
u32 ei_interrupt_count;
......
......@@ -5538,6 +5538,12 @@ enum punit_power_well {
GEN6_PM_RP_DOWN_THRESHOLD | \
GEN6_PM_RP_DOWN_TIMEOUT)
#define CHV_CZ_CLOCK_FREQ_MODE_200 200
#define CHV_CZ_CLOCK_FREQ_MODE_267 267
#define CHV_CZ_CLOCK_FREQ_MODE_320 320
#define CHV_CZ_CLOCK_FREQ_MODE_333 333
#define CHV_CZ_CLOCK_FREQ_MODE_400 400
#define GEN7_GT_SCRATCH_BASE 0x4F100
#define GEN7_GT_SCRATCH_REG_NUM 8
......
......@@ -5700,6 +5700,35 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
static void cherryview_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 val;
mutex_lock(&dev_priv->rps.hw_lock);
val = vlv_punit_read(dev_priv, CCK_FUSE_REG);
mutex_unlock(&dev_priv->rps.hw_lock);
switch ((val >> 2) & 0x7) {
case 0:
case 1:
dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_200;
dev_priv->mem_freq = 1600;
break;
case 2:
dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_267;
dev_priv->mem_freq = 1600;
break;
case 3:
dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_333;
dev_priv->mem_freq = 2000;
break;
case 4:
dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_320;
dev_priv->mem_freq = 1600;
break;
case 5:
dev_priv->rps.cz_freq = CHV_CZ_CLOCK_FREQ_MODE_400;
dev_priv->mem_freq = 1600;
break;
}
DRM_DEBUG_DRIVER("DDR speed: %d MHz", dev_priv->mem_freq);
I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment