mtd: nand: add OMAP2/OMAP3 NAND driver

This driver is present in the OMAP tree, now pushing it to MTD.

Original author(s):
       Jian Zhang <jzhang@ti.com>
Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Cc: Jian Zhang <jzhang@ti.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/nand/Kconfig

@@ -74,6 +74,12 @@ config MTD_NAND_AMS_DELTA
 	help
 	  Support for NAND flash on Amstrad E3 (Delta).
 
+config MTD_NAND_OMAP2
+	tristate "NAND Flash device on OMAP2 and OMAP3"
+	depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+          Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
+
 config MTD_NAND_TS7250
 	tristate "NAND Flash device on TS-7250 board"
 	depends on MACH_TS72XX

drivers/mtd/nand/Makefile

@@ -25,6 +25,7 @@ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
 obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
 obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
 obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
+obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
 obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
 obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= excite_nandflash.o
 obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o