Commit 68077264 authored by Alexandre Belloni's avatar Alexandre Belloni Committed by Dmitry Torokhov

Input: add ADC resistor ladder driver

A common way of multiplexing buttons on a single input in cheap devices is
to use a resistor ladder on an ADC. This driver supports that configuration
by polling an ADC channel provided by IIO.
Acked-by: default avatarJonathan Cameron <jic23@kernel.org>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent f959cd8c
ADC attached resistor ladder buttons
------------------------------------
Required properties:
- compatible: "adc-keys"
- io-channels: Phandle to an ADC channel
- io-channel-names = "buttons";
- keyup-threshold-microvolt: Voltage at which all the keys are considered up.
Optional properties:
- poll-interval: Poll interval time in milliseconds
- autorepeat: Boolean, Enable auto repeat feature of Linux input
subsystem.
Each button (key) is represented as a sub-node of "adc-keys":
Required subnode-properties:
- label: Descriptive name of the key.
- linux,code: Keycode to emit.
- press-threshold-microvolt: Voltage ADC input when this key is pressed.
Example:
#include <dt-bindings/input/input.h>
adc-keys {
compatible = "adc-keys";
io-channels = <&lradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <2000000>;
button-up {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
press-threshold-microvolt = <1500000>;
};
button-down {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
press-threshold-microvolt = <1000000>;
};
button-enter {
label = "Enter";
linux,code = <KEY_ENTER>;
press-threshold-microvolt = <500000>;
};
};
...@@ -12,6 +12,21 @@ menuconfig INPUT_KEYBOARD ...@@ -12,6 +12,21 @@ menuconfig INPUT_KEYBOARD
if INPUT_KEYBOARD if INPUT_KEYBOARD
config KEYBOARD_ADC
tristate "ADC Ladder Buttons"
depends on IIO
select INPUT_POLLDEV
help
This driver implements support for buttons connected
to an ADC using a resistor ladder.
Say Y here if your device has such buttons connected to an ADC. Your
board-specific setup logic must also provide a configuration data
for mapping voltages to buttons.
To compile this driver as a module, choose M here: the
module will be called adc_keys.
config KEYBOARD_ADP5520 config KEYBOARD_ADP5520
tristate "Keypad Support for ADP5520 PMIC" tristate "Keypad Support for ADP5520 PMIC"
depends on PMIC_ADP5520 depends on PMIC_ADP5520
......
...@@ -4,6 +4,7 @@ ...@@ -4,6 +4,7 @@
# Each configuration option enables a list of files. # Each configuration option enables a list of files.
obj-$(CONFIG_KEYBOARD_ADC) += adc-keys.o
obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o
obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o
obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o
......
/*
* Input driver for resistor ladder connected on ADC
*
* Copyright (c) 2016 Alexandre Belloni
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/iio/consumer.h>
#include <linux/iio/types.h>
#include <linux/input.h>
#include <linux/input-polldev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/slab.h>
struct adc_keys_button {
u32 voltage;
u32 keycode;
};
struct adc_keys_state {
struct iio_channel *channel;
u32 num_keys;
u32 last_key;
u32 keyup_voltage;
const struct adc_keys_button *map;
};
static void adc_keys_poll(struct input_polled_dev *dev)
{
struct adc_keys_state *st = dev->private;
int i, value, ret;
u32 diff, closest = 0xffffffff;
int keycode = 0;
ret = iio_read_channel_processed(st->channel, &value);
if (unlikely(ret < 0)) {
/* Forcibly release key if any was pressed */
value = st->keyup_voltage;
} else {
for (i = 0; i < st->num_keys; i++) {
diff = abs(st->map[i].voltage - value);
if (diff < closest) {
closest = diff;
keycode = st->map[i].keycode;
}
}
}
if (abs(st->keyup_voltage - value) < closest)
keycode = 0;
if (st->last_key && st->last_key != keycode)
input_report_key(dev->input, st->last_key, 0);
if (keycode)
input_report_key(dev->input, keycode, 1);
input_sync(dev->input);
st->last_key = keycode;
}
static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st)
{
struct adc_keys_button *map;
struct fwnode_handle *child;
int i;
st->num_keys = device_get_child_node_count(dev);
if (st->num_keys == 0) {
dev_err(dev, "keymap is missing\n");
return -EINVAL;
}
map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL);
if (!map)
return -ENOMEM;
i = 0;
device_for_each_child_node(dev, child) {
if (fwnode_property_read_u32(child, "press-threshold-microvolt",
&map[i].voltage)) {
dev_err(dev, "Key with invalid or missing voltage\n");
fwnode_handle_put(child);
return -EINVAL;
}
map[i].voltage /= 1000;
if (fwnode_property_read_u32(child, "linux,code",
&map[i].keycode)) {
dev_err(dev, "Key with invalid or missing linux,code\n");
fwnode_handle_put(child);
return -EINVAL;
}
i++;
}
st->map = map;
return 0;
}
static int adc_keys_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct adc_keys_state *st;
struct input_polled_dev *poll_dev;
struct input_dev *input;
enum iio_chan_type type;
int i, value;
int error;
st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
if (!st)
return -ENOMEM;
st->channel = devm_iio_channel_get(dev, "buttons");
if (IS_ERR(st->channel))
return PTR_ERR(st->channel);
if (!st->channel->indio_dev)
return -ENXIO;
error = iio_get_channel_type(st->channel, &type);
if (error < 0)
return error;
if (type != IIO_VOLTAGE) {
dev_err(dev, "Incompatible channel type %d\n", type);
return -EINVAL;
}
if (device_property_read_u32(dev, "keyup-threshold-microvolt",
&st->keyup_voltage)) {
dev_err(dev, "Invalid or missing keyup voltage\n");
return -EINVAL;
}
st->keyup_voltage /= 1000;
error = adc_keys_load_keymap(dev, st);
if (error)
return error;
platform_set_drvdata(pdev, st);
poll_dev = devm_input_allocate_polled_device(dev);
if (!poll_dev) {
dev_err(dev, "failed to allocate input device\n");
return -ENOMEM;
}
if (!device_property_read_u32(dev, "poll-interval", &value))
poll_dev->poll_interval = value;
poll_dev->poll = adc_keys_poll;
poll_dev->private = st;
input = poll_dev->input;
input->name = pdev->name;
input->phys = "adc-keys/input0";
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
__set_bit(EV_KEY, input->evbit);
for (i = 0; i < st->num_keys; i++)
__set_bit(st->map[i].keycode, input->keybit);
if (device_property_read_bool(dev, "autorepeat"))
__set_bit(EV_REP, input->evbit);
error = input_register_polled_device(poll_dev);
if (error) {
dev_err(dev, "Unable to register input device: %d\n", error);
return error;
}
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id adc_keys_of_match[] = {
{ .compatible = "adc-keys", },
{ }
};
MODULE_DEVICE_TABLE(of, adc_keys_of_match);
#endif
static struct platform_driver __refdata adc_keys_driver = {
.driver = {
.name = "adc_keys",
.of_match_table = of_match_ptr(adc_keys_of_match),
},
.probe = adc_keys_probe,
};
module_platform_driver(adc_keys_driver);
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment