Skip to content

L
linux
Commit 68435c0d authored by Rafael J. Wysocki's avatar Rafael J. Wysocki
Browse files
Options

Merge branch 'pm-opp' into pm-cpufreq

parents 89b56047 01fb4d3c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 718 additions and 71 deletions
Documentation/devicetree/bindings/opp/opp.txt
View file @ 68435c0d
......@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
phandle to a OPP table in their DT node. The OPP core will use this phandle to
find the operating points for the device.
Devices may want to choose OPP tables at runtime and so can provide a list of
phandles here. But only *one* of them should be chosen at runtime. This must be
accompanied by a corresponding "operating-points-names" property, to uniquely
identify the OPP tables.
If required, this can be extended for SoC vendor specfic bindings. Such bindings
should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
and should have a compatible description like: "operating-points-v2-<vendor>".
Optional properties:
- operating-points-names: Names of OPP tables (required if multiple OPP
tables are present), to uniquely identify them. The same list must be present
for all the CPUs which are sharing clock/voltage rails and hence the OPP
tables.
* OPP Table Node
This describes the OPPs belonging to a device. This node can have following
......@@ -100,6 +89,14 @@ Optional properties:
Entries for multiple regulators must be present in the same order as
regulators are specified in device's DT node.
- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
the above opp-microvolt property, but allows multiple voltage ranges to be
provided for the same OPP. At runtime, the platform can pick a <name> and
matching opp-microvolt-<name> property will be enabled for all OPPs. If the
platform doesn't pick a specific <name> or the <name> doesn't match with any
opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
present.
- opp-microamp: The maximum current drawn by the device in microamperes
considering system specific parameters (such as transients, process, aging,
maximum operating temperature range etc.) as necessary. This may be used to
......@@ -112,6 +109,9 @@ Optional properties:
for few regulators, then this should be marked as zero for them. If it isn't
required for any regulator, then this property need not be present.
- opp-microamp-<name>: Named opp-microamp property. Similar to
opp-microvolt-<name> property, but for microamp instead.
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.
......@@ -123,6 +123,26 @@ Optional properties:
- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
the table should have this.
- opp-supported-hw: This enables us to select only a subset of OPPs from the
larger OPP table, based on what version of the hardware we are running on. We
still can't have multiple nodes with the same opp-hz value in OPP table.
It's an user defined array containing a hierarchy of hardware version numbers,
supported by the OPP. For example: a platform with hierarchy of three levels
of versions (A, B and C), this field should be like <X Y Z>, where X
corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
corresponds to version hierarchy C.
Each level of hierarchy is represented by a 32 bit value, and so there can be
only 32 different supported version per hierarchy. i.e. 1 bit per version. A
value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
level. And a value of 0x00000000 will disable the OPP completely, and so we
never want that to happen.
If 32 values aren't sufficient for a version hierarchy, than that version
hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
above example, Z1 & Z2 refer to the version hierarchy Z.
- status: Marks the node enabled/disabled.
Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
......@@ -157,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
......@@ -236,20 +256,20 @@ independently.
* independently.
*/
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
......@@ -312,20 +332,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
opp01 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
opp02 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
......@@ -338,20 +358,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
opp10 {
opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
opp11 {
opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
opp12 {
opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
......@@ -378,7 +398,7 @@ Example 4: Handling multiple regulators
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
......@@ -391,7 +411,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
......@@ -404,7 +424,7 @@ Example 4: Handling multiple regulators
/* OR */
opp00 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
......@@ -417,7 +437,8 @@ Example 4: Handling multiple regulators
};
};
Example 5: Multiple OPP tables
Example 5: opp-supported-hw
(example: three level hierarchy of versions: cuts, substrate and process)
/ {
cpus {
......@@ -426,40 +447,73 @@ Example 5: Multiple OPP tables
...
cpu-supply = <&cpu_supply>
operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
operating-points-names = "slow", "fast";
operating-points-v2 = <&cpu0_opp_table_slow>;
};
};
cpu0_opp_table_slow: opp_table_slow {
opp_table {
compatible = "operating-points-v2";
status = "okay";
opp-shared;
opp00 {
opp@600000000 {
/*
* Supports all substrate and process versions for 0xF
* cuts, i.e. only first four cuts.
*/
opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000 915000 925000>;
...
};
opp01 {
opp@800000000 {
/*
* Supports:
* - cuts: only one, 6th cut (represented by 6th bit).
* - substrate: supports 16 different substrate versions
* - process: supports 9 different process versions
*/
opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <900000 915000 925000>;
...
};
};
};
Example 6: opp-microvolt-<name>, opp-microamp-<name>:
(example: device with two possible microvolt ranges: slow and fast)
cpu0_opp_table_fast: opp_table_fast {
/ {
cpus {
cpu@0 {
compatible = "arm,cortex-a7";
...
operating-points-v2 = <&cpu0_opp_table>;
};
};
cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
status = "okay";
opp-shared;
opp10 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
...
opp-microvolt-slow = <900000 915000 925000>;
opp-microvolt-fast = <970000 975000 985000>;
opp-microamp-slow = <70000>;
opp-microamp-fast = <71000>;
};
opp11 {
opp-hz = /bits/ 64 <1100000000>;
...
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
<910000 925000 935000>; /* Supply vcc1 */
opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
<960000 965000 975000>; /* Supply vcc1 */
opp-microamp = <70000>; /* Will be used for both slow/fast */
};
};
};
arch/arm/boot/dts/exynos4412.dtsi
View file @ 68435c0d
......@@ -64,73 +64,73 @@ cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp@200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
opp01 {
opp@300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <900000>;
clock-latency-ns = <200000>;
};
opp02 {
opp@400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
opp03 {
opp@500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-microvolt = <950000>;
clock-latency-ns = <200000>;
};
opp04 {
opp@600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <975000>;
clock-latency-ns = <200000>;
};
opp05 {
opp@700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
opp06 {
opp@800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <200000>;
opp-suspend;
};
opp07 {
opp@900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <200000>;
};
opp08 {
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1087500>;
clock-latency-ns = <200000>;
};
opp09 {
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <200000>;
};
opp10 {
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1187500>;
clock-latency-ns = <200000>;
};
opp11 {
opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <200000>;
};
opp12 {
opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1287500>;
clock-latency-ns = <200000>;
};
opp13 {
opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1350000>;
clock-latency-ns = <200000>;
......
drivers/base/power/opp/Makefile
View file @ 68435c0d
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
obj-y += core.o cpu.o
obj-$(CONFIG_DEBUG_FS) += debugfs.o
drivers/base/power/opp/core.c
View file @ 68435c0d
This diff is collapsed.
drivers/base/power/opp/debugfs.c 0 → 100644
View file @ 68435c0d
/*
* Generic OPP debugfs interface
*
* Copyright (C) 2015-2016 Viresh Kumar <viresh.kumar@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/limits.h>
#include "opp.h"
static struct dentry *rootdir;
static void opp_set_dev_name(const struct device *dev, char *name)
{
if (dev->parent)
snprintf(name, NAME_MAX, "%s-%s", dev_name(dev->parent),
dev_name(dev));
else
snprintf(name, NAME_MAX, "%s", dev_name(dev));
}
void opp_debug_remove_one(struct dev_pm_opp *opp)
{
debugfs_remove_recursive(opp->dentry);
}
int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp)
{
struct dentry *pdentry = dev_opp->dentry;
struct dentry *d;
char name[25]; /* 20 chars for 64 bit value + 5 (opp:\0) */
/* Rate is unique to each OPP, use it to give opp-name */
snprintf(name, sizeof(name), "opp:%lu", opp->rate);
/* Create per-opp directory */
d = debugfs_create_dir(name, pdentry);
if (!d)
return -ENOMEM;
if (!debugfs_create_bool("available", S_IRUGO, d, &opp->available))
return -ENOMEM;
if (!debugfs_create_bool("dynamic", S_IRUGO, d, &opp->dynamic))
return -ENOMEM;
if (!debugfs_create_bool("turbo", S_IRUGO, d, &opp->turbo))
return -ENOMEM;
if (!debugfs_create_bool("suspend", S_IRUGO, d, &opp->suspend))
return -ENOMEM;
if (!debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate))
return -ENOMEM;
if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d, &opp->u_volt))
return -ENOMEM;
if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d, &opp->u_volt_min))
return -ENOMEM;
if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d, &opp->u_volt_max))
return -ENOMEM;
if (!debugfs_create_ulong("u_amp", S_IRUGO, d, &opp->u_amp))
return -ENOMEM;
if (!debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
&opp->clock_latency_ns))
return -ENOMEM;
opp->dentry = d;
return 0;
}
static int device_opp_debug_create_dir(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{
const struct device *dev = list_dev->dev;
struct dentry *d;
opp_set_dev_name(dev, dev_opp->dentry_name);
/* Create device specific directory */
d = debugfs_create_dir(dev_opp->dentry_name, rootdir);
if (!d) {
dev_err(dev, "%s: Failed to create debugfs dir\n", __func__);
return -ENOMEM;
}
list_dev->dentry = d;
dev_opp->dentry = d;
return 0;
}
static int device_opp_debug_create_link(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{
const struct device *dev = list_dev->dev;
char name[NAME_MAX];
struct dentry *d;
opp_set_dev_name(list_dev->dev, name);
/* Create device specific directory link */
d = debugfs_create_symlink(name, rootdir, dev_opp->dentry_name);
if (!d) {
dev_err(dev, "%s: Failed to create link\n", __func__);
return -ENOMEM;
}
list_dev->dentry = d;
return 0;
}
/**
* opp_debug_register - add a device opp node to the debugfs 'opp' directory
* @list_dev: list-dev pointer for device
* @dev_opp: the device-opp being added
*
* Dynamically adds device specific directory in debugfs 'opp' directory. If the
* device-opp is shared with other devices, then links will be created for all
* devices except the first.
*
* Return: 0 on success, otherwise negative error.
*/
int opp_debug_register(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{
if (!rootdir) {
pr_debug("%s: Uninitialized rootdir\n", __func__);
return -EINVAL;
}
if (dev_opp->dentry)
return device_opp_debug_create_link(list_dev, dev_opp);
return device_opp_debug_create_dir(list_dev, dev_opp);
}
static void opp_migrate_dentry(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{
struct device_list_opp *new_dev;
const struct device *dev;
struct dentry *dentry;
/* Look for next list-dev */
list_for_each_entry(new_dev, &dev_opp->dev_list, node)
if (new_dev != list_dev)
break;
/* new_dev is guaranteed to be valid here */
dev = new_dev->dev;
debugfs_remove_recursive(new_dev->dentry);
opp_set_dev_name(dev, dev_opp->dentry_name);
dentry = debugfs_rename(rootdir, list_dev->dentry, rootdir,
dev_opp->dentry_name);
if (!dentry) {
dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
__func__, dev_name(list_dev->dev), dev_name(dev));
return;
}
new_dev->dentry = dentry;
dev_opp->dentry = dentry;
}
/**
* opp_debug_unregister - remove a device opp node from debugfs opp directory
* @list_dev: list-dev pointer for device
* @dev_opp: the device-opp being removed
*
* Dynamically removes device specific directory from debugfs 'opp' directory.
*/
void opp_debug_unregister(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{
if (list_dev->dentry == dev_opp->dentry) {
/* Move the real dentry object under another device */
if (!list_is_singular(&dev_opp->dev_list)) {
opp_migrate_dentry(list_dev, dev_opp);
goto out;
}
dev_opp->dentry = NULL;
}
debugfs_remove_recursive(list_dev->dentry);
out:
list_dev->dentry = NULL;
}
static int __init opp_debug_init(void)
{
/* Create /sys/kernel/debug/opp directory */
rootdir = debugfs_create_dir("opp", NULL);
if (!rootdir) {
pr_err("%s: Failed to create root directory\n", __func__);
return -ENOMEM;
}
return 0;
}
core_initcall(opp_debug_init);
drivers/base/power/opp/opp.h
View file @ 68435c0d
......@@ -17,6 +17,7 @@
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/limits.h>
#include <linux/pm_opp.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
......@@ -50,9 +51,10 @@ extern struct mutex dev_opp_list_lock;
* are protected by the dev_opp_list_lock for integrity.
* IMPORTANT: the opp nodes should be maintained in increasing
* order.
* @dynamic: not-created from static DT entries.
* @available: true/false - marks if this OPP as available or not
* @dynamic: not-created from static DT entries.
* @turbo: true if turbo (boost) OPP
* @suspend: true if suspend OPP
* @rate: Frequency in hertz
* @u_volt: Target voltage in microvolts corresponding to this OPP
* @u_volt_min: Minimum voltage in microvolts corresponding to this OPP
......@@ -63,6 +65,7 @@ extern struct mutex dev_opp_list_lock;
* @dev_opp: points back to the device_opp struct this opp belongs to
* @rcu_head: RCU callback head used for deferred freeing
* @np: OPP's device node.
* @dentry: debugfs dentry pointer (per opp)
*
* This structure stores the OPP information for a given device.
*/
......@@ -72,6 +75,7 @@ struct dev_pm_opp {
bool available;
bool dynamic;
bool turbo;
bool suspend;
unsigned long rate;
unsigned long u_volt;
......@@ -84,6 +88,10 @@ struct dev_pm_opp {
struct rcu_head rcu_head;
struct device_node *np;
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
#endif
};
/**
......@@ -91,6 +99,7 @@ struct dev_pm_opp {
* @node: list node
* @dev: device to which the struct object belongs
* @rcu_head: RCU callback head used for deferred freeing
* @dentry: debugfs dentry pointer (per device)
*
* This is an internal data structure maintaining the list of devices that are
* managed by 'struct device_opp'.
......@@ -99,6 +108,10 @@ struct device_list_opp {
struct list_head node;
const struct device *dev;
struct rcu_head rcu_head;
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
#endif
};
/**
......@@ -113,7 +126,14 @@ struct device_list_opp {
* @dev_list: list of devices that share these OPPs
* @opp_list: list of opps
* @np: struct device_node pointer for opp's DT node.
* @clock_latency_ns_max: Max clock latency in nanoseconds.
* @shared_opp: OPP is shared between multiple devices.
* @suspend_opp: Pointer to OPP to be used during device suspend.
* @supported_hw: Array of version number to support.
* @supported_hw_count: Number of elements in supported_hw array.
* @prop_name: A name to postfix to many DT properties, while parsing them.
* @dentry: debugfs dentry pointer of the real device directory (not links).
* @dentry_name: Name of the real dentry.
*
* This is an internal data structure maintaining the link to opps attached to
* a device. This structure is not meant to be shared to users as it is
......@@ -135,6 +155,15 @@ struct device_opp {
unsigned long clock_latency_ns_max;
bool shared_opp;
struct dev_pm_opp *suspend_opp;
unsigned int *supported_hw;
unsigned int supported_hw_count;
const char *prop_name;
#ifdef CONFIG_DEBUG_FS
struct dentry *dentry;
char dentry_name[NAME_MAX];
#endif
};
/* Routines internal to opp core */
......@@ -143,4 +172,26 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
struct device_opp *dev_opp);
struct device_node *_of_get_opp_desc_node(struct device *dev);
#ifdef CONFIG_DEBUG_FS
void opp_debug_remove_one(struct dev_pm_opp *opp);
int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp);
int opp_debug_register(struct device_list_opp *list_dev,
struct device_opp *dev_opp);
void opp_debug_unregister(struct device_list_opp *list_dev,
struct device_opp *dev_opp);
#else
static inline void opp_debug_remove_one(struct dev_pm_opp *opp) {}
static inline int opp_debug_create_one(struct dev_pm_opp *opp,
struct device_opp *dev_opp)
{ return 0; }
static inline int opp_debug_register(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{ return 0; }
static inline void opp_debug_unregister(struct device_list_opp *list_dev,
struct device_opp *dev_opp)
{ }
#endif /* DEBUG_FS */
#endif /* __DRIVER_OPP_H__ */
include/linux/pm_opp.h
View file @ 68435c0d
......@@ -55,6 +55,11 @@ int dev_pm_opp_enable(struct device *dev, unsigned long freq);
int dev_pm_opp_disable(struct device *dev, unsigned long freq);
struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev);
int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
unsigned int count);
void dev_pm_opp_put_supported_hw(struct device *dev);
int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
void dev_pm_opp_put_prop_name(struct device *dev);
#else
static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
{
......@@ -129,6 +134,23 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
{
return ERR_PTR(-EINVAL);
}
static inline int dev_pm_opp_set_supported_hw(struct device *dev,
const u32 *versions,
unsigned int count)
{
return -EINVAL;
}
static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
{
return -EINVAL;
}
static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
#endif /* CONFIG_PM_OPP */
#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7