arm64: dts: ls1028a: Move thermal-zone out of SoC

Move thermal-zone node from the soc node to the root node.

thermal-zone node does not have any register properties and thus
shouldn't be placed on the bus.

This fixes the following build warnings with W=1:

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi:583.17-612.5: Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -128,6 +128,37 @@ its: gic-its@6020000 {
 		};
 	};
 
+	thermal-zones {
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				core_cluster_alert: core-cluster-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				core_cluster_crit: core-cluster-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&core_cluster_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -580,37 +611,6 @@ tmu: tmu@1f00000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		thermal-zones {
-			core-cluster {
-				polling-delay-passive = <1000>;
-				polling-delay = <5000>;
-				thermal-sensors = <&tmu 0>;
-
-				trips {
-					core_cluster_alert: core-cluster-alert {
-						temperature = <85000>;
-						hysteresis = <2000>;
-						type = "passive";
-					};
-
-					core_cluster_crit: core-cluster-crit {
-						temperature = <95000>;
-						hysteresis = <2000>;
-						type = "critical";
-					};
-				};
-
-				cooling-maps {
-					map0 {
-						trip = <&core_cluster_alert>;
-						cooling-device =
-							<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-					};
-				};
-			};
-		};
-
 		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			compatible = "pci-host-ecam-generic";
 			reg = <0x01 0xf0000000 0x0 0x100000>;