ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board

This patch enables CAN1 interface exposed through connector J20 on the
carrier board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Link: https://lore.kernel.org/r/20200907155541.2011-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm/boot/dts/r8a7742-iwg21d-q7.dts

@@ -131,10 +131,26 @@ sgtl5000: codec@a {
 	};
 };
 
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &cmt0 {
 	status = "okay";
 };
 
+&gpio1 {
+	can-trx-en-gpio{
+		gpio-hog;
+		gpios = <28 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can-trx-en-gpio";
+	};
+};
+
 &hsusb {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
@@ -203,6 +219,11 @@ avb_pins: avb {
 		function = "avb";
 	};
 
+	can1_pins: can1 {
+		groups = "can1_data_b";
+		function = "can1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2_b";
 		function = "i2c2";