Commit 68ef4836 authored by Marcus Folkesson's avatar Marcus Folkesson Committed by Dmitry Torokhov

Input: pxrc - new driver for PhoenixRC Flight Controller Adapter

This driver let you plug in your RC controller to the adapter and
use it as input device in various RC simulators.
Signed-off-by: default avatarMarcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 85f46fbf
=======================================================
pxrc - PhoenixRC Flight Controller Adapter
=======================================================
:Author: Marcus Folkesson <marcus.folkesson@gmail.com>
This driver let you use your own RC controller plugged into the
adapter that comes with PhoenixRC [1]_ or other compatible adapters.
The adapter supports 7 analog channels and 1 digital input switch.
Notes
=====
Many RC controllers is able to configure which stick goes to which channel.
This is also configurable in most simulators, so a matching is not necessary.
The driver is generating the following input event for analog channels:
+---------+----------------+
| Channel | Event |
+=========+================+
| 1 | ABS_X |
+---------+----------------+
| 2 | ABS_Y |
+---------+----------------+
| 3 | ABS_RX |
+---------+----------------+
| 4 | ABS_RY |
+---------+----------------+
| 5 | ABS_RUDDER |
+---------+----------------+
| 6 | ABS_THROTTLE |
+---------+----------------+
| 7 | ABS_MISC |
+---------+----------------+
The digital input switch is generated as an `BTN_A` event.
Manual Testing
==============
To test this driver's functionality you may use `input-event` which is part of
the `input layer utilities` suite [2]_.
For example::
> modprobe pxrc
> input-events <devnr>
To print all input events from input `devnr`.
References
==========
.. [1] http://www.phoenix-sim.com/
.. [2] https://www.kraxel.org/cgit/input/
...@@ -351,4 +351,14 @@ config JOYSTICK_PSXPAD_SPI_FF ...@@ -351,4 +351,14 @@ config JOYSTICK_PSXPAD_SPI_FF
To drive rumble motor a dedicated power supply is required. To drive rumble motor a dedicated power supply is required.
config JOYSTICK_PXRC
tristate "PhoenixRC Flight Controller Adapter"
depends on USB_ARCH_HAS_HCD
select USB
help
Say Y here if you want to use the PhoenixRC Flight Controller Adapter.
To compile this driver as a module, choose M here: the
module will be called pxrc.
endif endif
...@@ -23,6 +23,7 @@ obj-$(CONFIG_JOYSTICK_JOYDUMP) += joydump.o ...@@ -23,6 +23,7 @@ obj-$(CONFIG_JOYSTICK_JOYDUMP) += joydump.o
obj-$(CONFIG_JOYSTICK_MAGELLAN) += magellan.o obj-$(CONFIG_JOYSTICK_MAGELLAN) += magellan.o
obj-$(CONFIG_JOYSTICK_MAPLE) += maplecontrol.o obj-$(CONFIG_JOYSTICK_MAPLE) += maplecontrol.o
obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o
obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o
obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o
obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o
obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o
......
// SPDX-License-Identifier: GPL-2.0
/*
* Driver for Phoenix RC Flight Controller Adapter
*
* Copyright (C) 2018 Marcus Folkesson <marcus.folkesson@gmail.com>
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
#include <linux/mutex.h>
#include <linux/input.h>
#define PXRC_VENDOR_ID (0x1781)
#define PXRC_PRODUCT_ID (0x0898)
static const struct usb_device_id pxrc_table[] = {
{ USB_DEVICE(PXRC_VENDOR_ID, PXRC_PRODUCT_ID) },
{ }
};
MODULE_DEVICE_TABLE(usb, pxrc_table);
struct pxrc {
struct input_dev *input;
struct usb_device *udev;
struct usb_interface *intf;
struct urb *urb;
struct mutex pm_mutex;
bool is_open;
__u8 epaddr;
char phys[64];
unsigned char *data;
size_t bsize;
};
static void pxrc_usb_irq(struct urb *urb)
{
struct pxrc *pxrc = urb->context;
int error;
switch (urb->status) {
case 0:
/* success */
break;
case -ETIME:
/* this urb is timing out */
dev_dbg(&pxrc->intf->dev,
"%s - urb timed out - was the device unplugged?\n",
__func__);
return;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
case -EPIPE:
/* this urb is terminated, clean up */
dev_dbg(&pxrc->intf->dev, "%s - urb shutting down with status: %d\n",
__func__, urb->status);
return;
default:
dev_dbg(&pxrc->intf->dev, "%s - nonzero urb status received: %d\n",
__func__, urb->status);
goto exit;
}
if (urb->actual_length == 8) {
input_report_abs(pxrc->input, ABS_X, pxrc->data[0]);
input_report_abs(pxrc->input, ABS_Y, pxrc->data[2]);
input_report_abs(pxrc->input, ABS_RX, pxrc->data[3]);
input_report_abs(pxrc->input, ABS_RY, pxrc->data[4]);
input_report_abs(pxrc->input, ABS_RUDDER, pxrc->data[5]);
input_report_abs(pxrc->input, ABS_THROTTLE, pxrc->data[6]);
input_report_abs(pxrc->input, ABS_MISC, pxrc->data[7]);
input_report_key(pxrc->input, BTN_A, pxrc->data[1]);
}
exit:
/* Resubmit to fetch new fresh URBs */
error = usb_submit_urb(urb, GFP_ATOMIC);
if (error && error != -EPERM)
dev_err(&pxrc->intf->dev,
"%s - usb_submit_urb failed with result: %d",
__func__, error);
}
static int pxrc_open(struct input_dev *input)
{
struct pxrc *pxrc = input_get_drvdata(input);
int retval;
mutex_lock(&pxrc->pm_mutex);
retval = usb_submit_urb(pxrc->urb, GFP_KERNEL);
if (retval) {
dev_err(&pxrc->intf->dev,
"%s - usb_submit_urb failed, error: %d\n",
__func__, retval);
retval = -EIO;
goto out;
}
pxrc->is_open = true;
out:
mutex_unlock(&pxrc->pm_mutex);
return retval;
}
static void pxrc_close(struct input_dev *input)
{
struct pxrc *pxrc = input_get_drvdata(input);
mutex_lock(&pxrc->pm_mutex);
usb_kill_urb(pxrc->urb);
pxrc->is_open = false;
mutex_unlock(&pxrc->pm_mutex);
}
static int pxrc_usb_init(struct pxrc *pxrc)
{
struct usb_endpoint_descriptor *epirq;
unsigned int pipe;
int retval;
/* Set up the endpoint information */
/* This device only has an interrupt endpoint */
retval = usb_find_common_endpoints(pxrc->intf->cur_altsetting,
NULL, NULL, &epirq, NULL);
if (retval) {
dev_err(&pxrc->intf->dev,
"Could not find endpoint\n");
goto error;
}
pxrc->bsize = usb_endpoint_maxp(epirq);
pxrc->epaddr = epirq->bEndpointAddress;
pxrc->data = devm_kmalloc(&pxrc->intf->dev, pxrc->bsize, GFP_KERNEL);
if (!pxrc->data) {
retval = -ENOMEM;
goto error;
}
usb_set_intfdata(pxrc->intf, pxrc);
usb_make_path(pxrc->udev, pxrc->phys, sizeof(pxrc->phys));
strlcat(pxrc->phys, "/input0", sizeof(pxrc->phys));
pxrc->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pxrc->urb) {
retval = -ENOMEM;
goto error;
}
pipe = usb_rcvintpipe(pxrc->udev, pxrc->epaddr),
usb_fill_int_urb(pxrc->urb, pxrc->udev, pipe, pxrc->data, pxrc->bsize,
pxrc_usb_irq, pxrc, 1);
error:
return retval;
}
static int pxrc_input_init(struct pxrc *pxrc)
{
pxrc->input = devm_input_allocate_device(&pxrc->intf->dev);
if (pxrc->input == NULL) {
dev_err(&pxrc->intf->dev, "couldn't allocate input device\n");
return -ENOMEM;
}
pxrc->input->name = "PXRC Flight Controller Adapter";
pxrc->input->phys = pxrc->phys;
usb_to_input_id(pxrc->udev, &pxrc->input->id);
pxrc->input->open = pxrc_open;
pxrc->input->close = pxrc_close;
input_set_capability(pxrc->input, EV_KEY, BTN_A);
input_set_abs_params(pxrc->input, ABS_X, 0, 255, 0, 0);
input_set_abs_params(pxrc->input, ABS_Y, 0, 255, 0, 0);
input_set_abs_params(pxrc->input, ABS_RX, 0, 255, 0, 0);
input_set_abs_params(pxrc->input, ABS_RY, 0, 255, 0, 0);
input_set_abs_params(pxrc->input, ABS_RUDDER, 0, 255, 0, 0);
input_set_abs_params(pxrc->input, ABS_THROTTLE, 0, 255, 0, 0);
input_set_abs_params(pxrc->input, ABS_MISC, 0, 255, 0, 0);
input_set_drvdata(pxrc->input, pxrc);
return input_register_device(pxrc->input);
}
static int pxrc_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct pxrc *pxrc;
int retval;
pxrc = devm_kzalloc(&intf->dev, sizeof(*pxrc), GFP_KERNEL);
if (!pxrc)
return -ENOMEM;
mutex_init(&pxrc->pm_mutex);
pxrc->udev = usb_get_dev(interface_to_usbdev(intf));
pxrc->intf = intf;
retval = pxrc_usb_init(pxrc);
if (retval)
goto error;
retval = pxrc_input_init(pxrc);
if (retval)
goto err_free_urb;
return 0;
err_free_urb:
usb_free_urb(pxrc->urb);
error:
return retval;
}
static void pxrc_disconnect(struct usb_interface *intf)
{
struct pxrc *pxrc = usb_get_intfdata(intf);
usb_free_urb(pxrc->urb);
usb_set_intfdata(intf, NULL);
}
static int pxrc_suspend(struct usb_interface *intf, pm_message_t message)
{
struct pxrc *pxrc = usb_get_intfdata(intf);
mutex_lock(&pxrc->pm_mutex);
if (pxrc->is_open)
usb_kill_urb(pxrc->urb);
mutex_unlock(&pxrc->pm_mutex);
return 0;
}
static int pxrc_resume(struct usb_interface *intf)
{
struct pxrc *pxrc = usb_get_intfdata(intf);
int retval = 0;
mutex_lock(&pxrc->pm_mutex);
if (pxrc->is_open && usb_submit_urb(pxrc->urb, GFP_KERNEL) < 0)
retval = -EIO;
mutex_unlock(&pxrc->pm_mutex);
return retval;
}
static int pxrc_pre_reset(struct usb_interface *intf)
{
struct pxrc *pxrc = usb_get_intfdata(intf);
mutex_lock(&pxrc->pm_mutex);
usb_kill_urb(pxrc->urb);
return 0;
}
static int pxrc_post_reset(struct usb_interface *intf)
{
struct pxrc *pxrc = usb_get_intfdata(intf);
int retval = 0;
if (pxrc->is_open && usb_submit_urb(pxrc->urb, GFP_KERNEL) < 0)
retval = -EIO;
mutex_unlock(&pxrc->pm_mutex);
return retval;
}
static int pxrc_reset_resume(struct usb_interface *intf)
{
return pxrc_resume(intf);
}
static struct usb_driver pxrc_driver = {
.name = "pxrc",
.probe = pxrc_probe,
.disconnect = pxrc_disconnect,
.id_table = pxrc_table,
.suspend = pxrc_suspend,
.resume = pxrc_resume,
.pre_reset = pxrc_pre_reset,
.post_reset = pxrc_post_reset,
.reset_resume = pxrc_reset_resume,
};
module_usb_driver(pxrc_driver);
MODULE_AUTHOR("Marcus Folkesson <marcus.folkesson@gmail.com>");
MODULE_DESCRIPTION("PhoenixRC Flight Controller Adapter");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment