Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: favr-32 build fix
  ATSTK1006: Fix boot from NAND flash
  avr32: remove .note.gnu.build-id section when making vmlinux.bin
  avr32: Enable pullup on USART TX lines

arch/avr32/boards/favr-32/flash.c

@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,

arch/avr32/boards/favr-32/setup.c

@@ -25,10 +25,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {

arch/avr32/boot/images/Makefile

@@ -10,7 +10,7 @@ MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
 
 extra-y		:= vmlinux.bin vmlinux.gz
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 

arch/avr32/mach-at32ap/at32ap700x.c

@@ -967,28 +967,28 @@ static inline void configure_usart0_pins(void)
 {
 	u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
 
-	select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart1_pins(void)
 {
 	u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
 
-	select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+	select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart2_pins(void)
 {
 	u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
 
-	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static inline void configure_usart3_pins(void)
 {
 	u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
 
-	select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+	select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
 }
 
 static struct platform_device *__initdata at32_usarts[4];