Commit 69584604 authored by Bryan Whitehead's avatar Bryan Whitehead Committed by David S. Miller

lan743x: Add support for ethtool eeprom access

Implement ethtool eeprom access
Also provides access to OTP (One Time Programming)
Signed-off-by: default avatarBryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2958337d
...@@ -7,6 +7,178 @@ ...@@ -7,6 +7,178 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/phy.h> #include <linux/phy.h>
/* eeprom */
#define LAN743X_EEPROM_MAGIC (0x74A5)
#define LAN743X_OTP_MAGIC (0x74F3)
#define EEPROM_INDICATOR_1 (0xA5)
#define EEPROM_INDICATOR_2 (0xAA)
#define EEPROM_MAC_OFFSET (0x01)
#define MAX_EEPROM_SIZE 512
#define OTP_INDICATOR_1 (0xF3)
#define OTP_INDICATOR_2 (0xF7)
static int lan743x_otp_write(struct lan743x_adapter *adapter, u32 offset,
u32 length, u8 *data)
{
unsigned long timeout;
u32 buf;
int i;
buf = lan743x_csr_read(adapter, OTP_PWR_DN);
if (buf & OTP_PWR_DN_PWRDN_N_) {
/* clear it and wait to be cleared */
lan743x_csr_write(adapter, OTP_PWR_DN, 0);
timeout = jiffies + HZ;
do {
udelay(1);
buf = lan743x_csr_read(adapter, OTP_PWR_DN);
if (time_after(jiffies, timeout)) {
netif_warn(adapter, drv, adapter->netdev,
"timeout on OTP_PWR_DN completion\n");
return -EIO;
}
} while (buf & OTP_PWR_DN_PWRDN_N_);
}
/* set to BYTE program mode */
lan743x_csr_write(adapter, OTP_PRGM_MODE, OTP_PRGM_MODE_BYTE_);
for (i = 0; i < length; i++) {
lan743x_csr_write(adapter, OTP_ADDR1,
((offset + i) >> 8) &
OTP_ADDR1_15_11_MASK_);
lan743x_csr_write(adapter, OTP_ADDR2,
((offset + i) &
OTP_ADDR2_10_3_MASK_));
lan743x_csr_write(adapter, OTP_PRGM_DATA, data[i]);
lan743x_csr_write(adapter, OTP_TST_CMD, OTP_TST_CMD_PRGVRFY_);
lan743x_csr_write(adapter, OTP_CMD_GO, OTP_CMD_GO_GO_);
timeout = jiffies + HZ;
do {
udelay(1);
buf = lan743x_csr_read(adapter, OTP_STATUS);
if (time_after(jiffies, timeout)) {
netif_warn(adapter, drv, adapter->netdev,
"Timeout on OTP_STATUS completion\n");
return -EIO;
}
} while (buf & OTP_STATUS_BUSY_);
}
return 0;
}
static int lan743x_eeprom_wait(struct lan743x_adapter *adapter)
{
unsigned long start_time = jiffies;
u32 val;
do {
val = lan743x_csr_read(adapter, E2P_CMD);
if (!(val & E2P_CMD_EPC_BUSY_) ||
(val & E2P_CMD_EPC_TIMEOUT_))
break;
usleep_range(40, 100);
} while (!time_after(jiffies, start_time + HZ));
if (val & (E2P_CMD_EPC_TIMEOUT_ | E2P_CMD_EPC_BUSY_)) {
netif_warn(adapter, drv, adapter->netdev,
"EEPROM read operation timeout\n");
return -EIO;
}
return 0;
}
static int lan743x_eeprom_confirm_not_busy(struct lan743x_adapter *adapter)
{
unsigned long start_time = jiffies;
u32 val;
do {
val = lan743x_csr_read(adapter, E2P_CMD);
if (!(val & E2P_CMD_EPC_BUSY_))
return 0;
usleep_range(40, 100);
} while (!time_after(jiffies, start_time + HZ));
netif_warn(adapter, drv, adapter->netdev, "EEPROM is busy\n");
return -EIO;
}
static int lan743x_eeprom_read(struct lan743x_adapter *adapter,
u32 offset, u32 length, u8 *data)
{
int retval;
u32 val;
int i;
retval = lan743x_eeprom_confirm_not_busy(adapter);
if (retval)
return retval;
for (i = 0; i < length; i++) {
val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_;
val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
lan743x_csr_write(adapter, E2P_CMD, val);
retval = lan743x_eeprom_wait(adapter);
if (retval < 0)
return retval;
val = lan743x_csr_read(adapter, E2P_DATA);
data[i] = val & 0xFF;
offset++;
}
return 0;
}
static int lan743x_eeprom_write(struct lan743x_adapter *adapter,
u32 offset, u32 length, u8 *data)
{
int retval;
u32 val;
int i;
retval = lan743x_eeprom_confirm_not_busy(adapter);
if (retval)
return retval;
/* Issue write/erase enable command */
val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_;
lan743x_csr_write(adapter, E2P_CMD, val);
retval = lan743x_eeprom_wait(adapter);
if (retval < 0)
return retval;
for (i = 0; i < length; i++) {
/* Fill data register */
val = data[i];
lan743x_csr_write(adapter, E2P_DATA, val);
/* Send "write" command */
val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_;
val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
lan743x_csr_write(adapter, E2P_CMD, val);
retval = lan743x_eeprom_wait(adapter);
if (retval < 0)
return retval;
offset++;
}
return 0;
}
static void lan743x_ethtool_get_drvinfo(struct net_device *netdev, static void lan743x_ethtool_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *info) struct ethtool_drvinfo *info)
{ {
...@@ -32,6 +204,40 @@ static void lan743x_ethtool_set_msglevel(struct net_device *netdev, ...@@ -32,6 +204,40 @@ static void lan743x_ethtool_set_msglevel(struct net_device *netdev,
adapter->msg_enable = msglevel; adapter->msg_enable = msglevel;
} }
static int lan743x_ethtool_get_eeprom_len(struct net_device *netdev)
{
return MAX_EEPROM_SIZE;
}
static int lan743x_ethtool_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *ee, u8 *data)
{
struct lan743x_adapter *adapter = netdev_priv(netdev);
return lan743x_eeprom_read(adapter, ee->offset, ee->len, data);
}
static int lan743x_ethtool_set_eeprom(struct net_device *netdev,
struct ethtool_eeprom *ee, u8 *data)
{
struct lan743x_adapter *adapter = netdev_priv(netdev);
int ret = -EINVAL;
if (ee->magic == LAN743X_EEPROM_MAGIC)
ret = lan743x_eeprom_write(adapter, ee->offset, ee->len,
data);
/* Beware! OTP is One Time Programming ONLY!
* So do some strict condition check before messing up
*/
else if ((ee->magic == LAN743X_OTP_MAGIC) &&
(ee->offset == 0) &&
(ee->len == MAX_EEPROM_SIZE) &&
(data[0] == OTP_INDICATOR_1))
ret = lan743x_otp_write(adapter, ee->offset, ee->len, data);
return ret;
}
static const char lan743x_set0_hw_cnt_strings[][ETH_GSTRING_LEN] = { static const char lan743x_set0_hw_cnt_strings[][ETH_GSTRING_LEN] = {
"RX FCS Errors", "RX FCS Errors",
"RX Alignment Errors", "RX Alignment Errors",
...@@ -215,6 +421,9 @@ const struct ethtool_ops lan743x_ethtool_ops = { ...@@ -215,6 +421,9 @@ const struct ethtool_ops lan743x_ethtool_ops = {
.set_msglevel = lan743x_ethtool_set_msglevel, .set_msglevel = lan743x_ethtool_set_msglevel,
.get_link = ethtool_op_get_link, .get_link = ethtool_op_get_link,
.get_eeprom_len = lan743x_ethtool_get_eeprom_len,
.get_eeprom = lan743x_ethtool_get_eeprom,
.set_eeprom = lan743x_ethtool_set_eeprom,
.get_strings = lan743x_ethtool_get_strings, .get_strings = lan743x_ethtool_get_strings,
.get_ethtool_stats = lan743x_ethtool_get_ethtool_stats, .get_ethtool_stats = lan743x_ethtool_get_ethtool_stats,
.get_sset_count = lan743x_ethtool_get_sset_count, .get_sset_count = lan743x_ethtool_get_sset_count,
......
...@@ -42,6 +42,16 @@ ...@@ -42,6 +42,16 @@
#define DP_DATA_0 (0x030) #define DP_DATA_0 (0x030)
#define E2P_CMD (0x040)
#define E2P_CMD_EPC_BUSY_ BIT(31)
#define E2P_CMD_EPC_CMD_WRITE_ (0x30000000)
#define E2P_CMD_EPC_CMD_EWEN_ (0x20000000)
#define E2P_CMD_EPC_CMD_READ_ (0x00000000)
#define E2P_CMD_EPC_TIMEOUT_ BIT(10)
#define E2P_CMD_EPC_ADDR_MASK_ (0x000001FF)
#define E2P_DATA (0x044)
#define FCT_RX_CTL (0xAC) #define FCT_RX_CTL (0xAC)
#define FCT_RX_CTL_EN_(channel) BIT(28 + (channel)) #define FCT_RX_CTL_EN_(channel) BIT(28 + (channel))
#define FCT_RX_CTL_DIS_(channel) BIT(24 + (channel)) #define FCT_RX_CTL_DIS_(channel) BIT(24 + (channel))
...@@ -288,6 +298,29 @@ ...@@ -288,6 +298,29 @@
#define TX_CFG_C_TX_DMA_INT_STS_AUTO_CLR_ BIT(3) #define TX_CFG_C_TX_DMA_INT_STS_AUTO_CLR_ BIT(3)
#define TX_CFG_C_TX_INT_STS_R2C_MODE_MASK_ (0x00000007) #define TX_CFG_C_TX_INT_STS_R2C_MODE_MASK_ (0x00000007)
#define OTP_PWR_DN (0x1000)
#define OTP_PWR_DN_PWRDN_N_ BIT(0)
#define OTP_ADDR1 (0x1004)
#define OTP_ADDR1_15_11_MASK_ (0x1F)
#define OTP_ADDR2 (0x1008)
#define OTP_ADDR2_10_3_MASK_ (0xFF)
#define OTP_PRGM_DATA (0x1010)
#define OTP_PRGM_MODE (0x1014)
#define OTP_PRGM_MODE_BYTE_ BIT(0)
#define OTP_TST_CMD (0x1024)
#define OTP_TST_CMD_PRGVRFY_ BIT(3)
#define OTP_CMD_GO (0x1028)
#define OTP_CMD_GO_GO_ BIT(0)
#define OTP_STATUS (0x1030)
#define OTP_STATUS_BUSY_ BIT(0)
/* MAC statistics registers */ /* MAC statistics registers */
#define STAT_RX_FCS_ERRORS (0x1200) #define STAT_RX_FCS_ERRORS (0x1200)
#define STAT_RX_ALIGNMENT_ERRORS (0x1204) #define STAT_RX_ALIGNMENT_ERRORS (0x1204)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment