Commit 69d0fc72 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Greg Kroah-Hartman

serial: samsung: fix DMA mode enter condition for small FIFO sizes

commit 81ccb2a6 upstream.

Due to some of serial ports can have FIFO size smaller than cache line
size, and because of need to align DMA buffer address to cache line size,
it's necessary to calculate minimum number of bytes for which we want
to start DMA transaction to be at least cache line size. The simplest
way to meet this requirement is to get maximum of cache line size and
FIFO size.
Reported-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarRobert Baldyga <r.baldyga@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 79084e05
......@@ -342,7 +342,8 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
return;
}
if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize)
if (!ourport->dma || !ourport->dma->tx_chan ||
count < ourport->min_dma_size)
s3c24xx_serial_start_tx_pio(ourport);
else
s3c24xx_serial_start_tx_dma(ourport, count);
......@@ -742,7 +743,8 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) {
if (ourport->dma && ourport->dma->tx_chan &&
count >= ourport->min_dma_size) {
s3c24xx_serial_start_tx_dma(ourport, count);
goto out;
}
......@@ -1838,6 +1840,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
else if (ourport->info->fifosize)
ourport->port.fifosize = ourport->info->fifosize;
/*
* DMA transfers must be aligned at least to cache line size,
* so find minimal transfer size suitable for DMA mode
*/
ourport->min_dma_size = max_t(int, ourport->port.fifosize,
dma_get_cache_alignment());
probe_index++;
dbg("%s: initialising port %p...\n", __func__, ourport);
......
......@@ -82,6 +82,7 @@ struct s3c24xx_uart_port {
unsigned char tx_claimed;
unsigned int pm_level;
unsigned long baudclk_rate;
unsigned int min_dma_size;
unsigned int rx_irq;
unsigned int tx_irq;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment