Commit 69da8be9 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Vinod Koul

dmaengine: dw: Split DW and iDMA 32-bit operations

Here is a kinda big refactoring that should have been done
in the first place, when Intel iDMA 32-bit support appeared.

It splits operations which are different to Synopsys DesignWare and
Intel iDMA 32-bit controllers.

No functional change intended.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
parent 07816577
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DW_DMAC_CORE) += dw_dmac_core.o
dw_dmac_core-objs := core.o
dw_dmac_core-objs := core.o dw.o idma32.o
obj-$(CONFIG_DW_DMAC) += dw_dmac.o
dw_dmac-objs := platform.o
......
This diff is collapsed.
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2007-2008 Atmel Corporation
// Copyright (C) 2010-2011 ST Microelectronics
// Copyright (C) 2013,2018 Intel Corporation
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/types.h>
#include "internal.h"
static void dw_dma_initialize_chan(struct dw_dma_chan *dwc)
{
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
u32 cfghi = DWC_CFGH_FIFO_MODE;
u32 cfglo = DWC_CFGL_CH_PRIOR(dwc->priority);
bool hs_polarity = dwc->dws.hs_polarity;
cfghi |= DWC_CFGH_DST_PER(dwc->dws.dst_id);
cfghi |= DWC_CFGH_SRC_PER(dwc->dws.src_id);
cfghi |= DWC_CFGH_PROTCTL(dw->pdata->protctl);
/* Set polarity of handshake interface */
cfglo |= hs_polarity ? DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL : 0;
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
}
static void dw_dma_suspend_chan(struct dw_dma_chan *dwc, bool drain)
{
u32 cfglo = channel_readl(dwc, CFG_LO);
channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
}
static u32 dw_dma_bytes2block(struct dw_dma_chan *dwc,
size_t bytes, unsigned int width, size_t *len)
{
u32 block;
if ((bytes >> width) > dwc->block_size) {
block = dwc->block_size;
*len = dwc->block_size << width;
} else {
block = bytes >> width;
*len = bytes;
}
return block;
}
static size_t dw_dma_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
{
return DWC_CTLH_BLOCK_TS(block) << width;
}
static void dw_dma_encode_maxburst(struct dw_dma_chan *dwc, u32 *maxburst)
{
/*
* Fix burst size according to dw_dmac. We need to convert them as:
* 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
*/
*maxburst = *maxburst > 1 ? fls(*maxburst) - 2 : 0;
}
static void dw_dma_set_device_name(struct dw_dma *dw, int id)
{
snprintf(dw->name, sizeof(dw->name), "dw:dmac%d", id);
}
static void dw_dma_disable(struct dw_dma *dw)
{
do_dw_dma_off(dw);
}
static void dw_dma_enable(struct dw_dma *dw)
{
do_dw_dma_on(dw);
}
int dw_dma_probe(struct dw_dma_chip *chip)
{
struct dw_dma *dw;
dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
if (!dw)
return -ENOMEM;
/* Channel operations */
dw->initialize_chan = dw_dma_initialize_chan;
dw->suspend_chan = dw_dma_suspend_chan;
dw->encode_maxburst = dw_dma_encode_maxburst;
dw->bytes2block = dw_dma_bytes2block;
dw->block2bytes = dw_dma_block2bytes;
/* Device operations */
dw->set_device_name = dw_dma_set_device_name;
dw->disable = dw_dma_disable;
dw->enable = dw_dma_enable;
chip->dw = dw;
return do_dma_probe(chip);
}
EXPORT_SYMBOL_GPL(dw_dma_probe);
int dw_dma_remove(struct dw_dma_chip *chip)
{
return do_dma_remove(chip);
}
EXPORT_SYMBOL_GPL(dw_dma_remove);
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2013,2018 Intel Corporation
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/types.h>
#include "internal.h"
static void idma32_initialize_chan(struct dw_dma_chan *dwc)
{
u32 cfghi = 0;
u32 cfglo = 0;
/* Set default burst alignment */
cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
/* Low 4 bits of the request lines */
cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf);
cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf);
/* Request line extension (2 bits) */
cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3);
cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3);
channel_writel(dwc, CFG_LO, cfglo);
channel_writel(dwc, CFG_HI, cfghi);
}
static void idma32_suspend_chan(struct dw_dma_chan *dwc, bool drain)
{
u32 cfglo = channel_readl(dwc, CFG_LO);
if (drain)
cfglo |= IDMA32C_CFGL_CH_DRAIN;
else
cfglo &= ~IDMA32C_CFGL_CH_DRAIN;
channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
}
static u32 idma32_bytes2block(struct dw_dma_chan *dwc,
size_t bytes, unsigned int width, size_t *len)
{
u32 block;
if (bytes > dwc->block_size) {
block = dwc->block_size;
*len = dwc->block_size;
} else {
block = bytes;
*len = bytes;
}
return block;
}
static size_t idma32_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
{
return IDMA32C_CTLH_BLOCK_TS(block);
}
static void idma32_encode_maxburst(struct dw_dma_chan *dwc, u32 *maxburst)
{
*maxburst = *maxburst > 1 ? fls(*maxburst) - 1 : 0;
}
static void idma32_set_device_name(struct dw_dma *dw, int id)
{
snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", id);
}
/*
* Program FIFO size of channels.
*
* By default full FIFO (512 bytes) is assigned to channel 0. Here we
* slice FIFO on equal parts between channels.
*/
static void idma32_fifo_partition(struct dw_dma *dw)
{
u64 value = IDMA32C_FP_PSIZE_CH0(64) | IDMA32C_FP_PSIZE_CH1(64) |
IDMA32C_FP_UPDATE;
u64 fifo_partition = 0;
/* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */
fifo_partition |= value << 0;
/* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */
fifo_partition |= value << 32;
/* Program FIFO Partition registers - 64 bytes per channel */
idma32_writeq(dw, FIFO_PARTITION1, fifo_partition);
idma32_writeq(dw, FIFO_PARTITION0, fifo_partition);
}
static void idma32_disable(struct dw_dma *dw)
{
do_dw_dma_off(dw);
idma32_fifo_partition(dw);
}
static void idma32_enable(struct dw_dma *dw)
{
idma32_fifo_partition(dw);
do_dw_dma_on(dw);
}
int idma32_dma_probe(struct dw_dma_chip *chip)
{
struct dw_dma *dw;
dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
if (!dw)
return -ENOMEM;
/* Channel operations */
dw->initialize_chan = idma32_initialize_chan;
dw->suspend_chan = idma32_suspend_chan;
dw->encode_maxburst = idma32_encode_maxburst;
dw->bytes2block = idma32_bytes2block;
dw->block2bytes = idma32_block2bytes;
/* Device operations */
dw->set_device_name = idma32_set_device_name;
dw->disable = idma32_disable;
dw->enable = idma32_enable;
chip->dw = dw;
return do_dma_probe(chip);
}
EXPORT_SYMBOL_GPL(idma32_dma_probe);
int idma32_dma_remove(struct dw_dma_chip *chip)
{
return do_dma_remove(chip);
}
EXPORT_SYMBOL_GPL(idma32_dma_remove);
......@@ -15,8 +15,14 @@
#include "regs.h"
int dw_dma_disable(struct dw_dma_chip *chip);
int dw_dma_enable(struct dw_dma_chip *chip);
int do_dma_probe(struct dw_dma_chip *chip);
int do_dma_remove(struct dw_dma_chip *chip);
void do_dw_dma_on(struct dw_dma *dw);
void do_dw_dma_off(struct dw_dma *dw);
int do_dw_dma_disable(struct dw_dma_chip *chip);
int do_dw_dma_enable(struct dw_dma_chip *chip);
extern bool dw_dma_filter(struct dma_chan *chan, void *param);
......
......@@ -15,9 +15,17 @@
#include "internal.h"
static struct dw_dma_platform_data mrfld_pdata = {
struct dw_dma_pci_data {
const struct dw_dma_platform_data *pdata;
int (*probe)(struct dw_dma_chip *chip);
};
static const struct dw_dma_pci_data dw_pci_data = {
.probe = dw_dma_probe,
};
static const struct dw_dma_platform_data idma32_pdata = {
.nr_channels = 8,
.is_idma32 = true,
.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
.chan_priority = CHAN_PRIORITY_ASCENDING,
.block_size = 131071,
......@@ -26,9 +34,14 @@ static struct dw_dma_platform_data mrfld_pdata = {
.multi_block = {1, 1, 1, 1, 1, 1, 1, 1},
};
static const struct dw_dma_pci_data idma32_pci_data = {
.pdata = &idma32_pdata,
.probe = idma32_dma_probe,
};
static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
{
const struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
const struct dw_dma_pci_data *data = (void *)pid->driver_data;
struct dw_dma_chip *chip;
int ret;
......@@ -61,9 +74,9 @@ static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
chip->id = pdev->devfn;
chip->regs = pcim_iomap_table(pdev)[0];
chip->irq = pdev->irq;
chip->pdata = pdata;
chip->pdata = data->pdata;
ret = dw_dma_probe(chip);
ret = data->probe(chip);
if (ret)
return ret;
......@@ -89,7 +102,7 @@ static int dw_pci_suspend_late(struct device *dev)
struct pci_dev *pci = to_pci_dev(dev);
struct dw_dma_chip *chip = pci_get_drvdata(pci);
return dw_dma_disable(chip);
return do_dw_dma_disable(chip);
};
static int dw_pci_resume_early(struct device *dev)
......@@ -97,7 +110,7 @@ static int dw_pci_resume_early(struct device *dev)
struct pci_dev *pci = to_pci_dev(dev);
struct dw_dma_chip *chip = pci_get_drvdata(pci);
return dw_dma_enable(chip);
return do_dw_dma_enable(chip);
};
#endif /* CONFIG_PM_SLEEP */
......@@ -108,24 +121,24 @@ static const struct dev_pm_ops dw_pci_dev_pm_ops = {
static const struct pci_device_id dw_pci_id_table[] = {
/* Medfield (GPDMA) */
{ PCI_VDEVICE(INTEL, 0x0827) },
{ PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_data },
/* BayTrail */
{ PCI_VDEVICE(INTEL, 0x0f06) },
{ PCI_VDEVICE(INTEL, 0x0f40) },
{ PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_data },
{ PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_data },
/* Merrifield iDMA 32-bit (GPDMA) */
{ PCI_VDEVICE(INTEL, 0x11a2), (kernel_ulong_t)&mrfld_pdata },
/* Merrifield */
{ PCI_VDEVICE(INTEL, 0x11a2), (kernel_ulong_t)&idma32_pci_data },
/* Braswell */
{ PCI_VDEVICE(INTEL, 0x2286) },
{ PCI_VDEVICE(INTEL, 0x22c0) },
{ PCI_VDEVICE(INTEL, 0x2286), (kernel_ulong_t)&dw_pci_data },
{ PCI_VDEVICE(INTEL, 0x22c0), (kernel_ulong_t)&dw_pci_data },
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c60) },
{ PCI_VDEVICE(INTEL, 0x9c60), (kernel_ulong_t)&dw_pci_data },
/* Broadwell */
{ PCI_VDEVICE(INTEL, 0x9ce0) },
{ PCI_VDEVICE(INTEL, 0x9ce0), (kernel_ulong_t)&dw_pci_data },
{ }
};
......
......@@ -255,7 +255,7 @@ static void dw_shutdown(struct platform_device *pdev)
struct dw_dma_chip *chip = platform_get_drvdata(pdev);
/*
* We have to call dw_dma_disable() to stop any ongoing transfer. On
* We have to call do_dw_dma_disable() to stop any ongoing transfer. On
* some platforms we can't do that since DMA device is powered off.
* Moreover we have no possibility to check if the platform is affected
* or not. That's why we call pm_runtime_get_sync() / pm_runtime_put()
......@@ -264,7 +264,7 @@ static void dw_shutdown(struct platform_device *pdev)
* used by the driver.
*/
pm_runtime_get_sync(chip->dev);
dw_dma_disable(chip);
do_dw_dma_disable(chip);
pm_runtime_put_sync_suspend(chip->dev);
clk_disable_unprepare(chip->clk);
......@@ -294,7 +294,7 @@ static int dw_suspend_late(struct device *dev)
{
struct dw_dma_chip *chip = dev_get_drvdata(dev);
dw_dma_disable(chip);
do_dw_dma_disable(chip);
clk_disable_unprepare(chip->clk);
return 0;
......@@ -309,7 +309,7 @@ static int dw_resume_early(struct device *dev)
if (ret)
return ret;
return dw_dma_enable(chip);
return do_dw_dma_enable(chip);
}
#endif /* CONFIG_PM_SLEEP */
......
......@@ -312,6 +312,19 @@ struct dw_dma {
u8 all_chan_mask;
u8 in_use;
/* Channel operations */
void (*initialize_chan)(struct dw_dma_chan *dwc);
void (*suspend_chan)(struct dw_dma_chan *dwc, bool drain);
void (*encode_maxburst)(struct dw_dma_chan *dwc, u32 *maxburst);
u32 (*bytes2block)(struct dw_dma_chan *dwc, size_t bytes,
unsigned int width, size_t *len);
size_t (*block2bytes)(struct dw_dma_chan *dwc, u32 block, u32 width);
/* Device operations */
void (*set_device_name)(struct dw_dma *dw, int id);
void (*disable)(struct dw_dma *dw);
void (*enable)(struct dw_dma *dw);
/* platform data */
struct dw_dma_platform_data *pdata;
};
......
......@@ -45,9 +45,13 @@ struct dw_dma_chip {
#if IS_ENABLED(CONFIG_DW_DMAC_CORE)
int dw_dma_probe(struct dw_dma_chip *chip);
int dw_dma_remove(struct dw_dma_chip *chip);
int idma32_dma_probe(struct dw_dma_chip *chip);
int idma32_dma_remove(struct dw_dma_chip *chip);
#else
static inline int dw_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
static inline int dw_dma_remove(struct dw_dma_chip *chip) { return 0; }
static inline int idma32_dma_probe(struct dw_dma_chip *chip) { return -ENODEV; }
static inline int idma32_dma_remove(struct dw_dma_chip *chip) { return 0; }
#endif /* CONFIG_DW_DMAC_CORE */
#endif /* _DMA_DW_H */
......@@ -38,7 +38,6 @@ struct dw_dma_slave {
/**
* struct dw_dma_platform_data - Controller configuration parameters
* @nr_channels: Number of channels supported by hardware (max 8)
* @is_idma32: The type of the DMA controller is iDMA32
* @chan_allocation_order: Allocate channels starting from 0 or 7
* @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
* @block_size: Maximum block size supported by the controller
......@@ -50,7 +49,6 @@ struct dw_dma_slave {
*/
struct dw_dma_platform_data {
unsigned int nr_channels;
bool is_idma32;
#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */
#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */
unsigned char chan_allocation_order;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment