Commit 69f984f0 authored by Mark Greer's avatar Mark Greer Committed by Samuel Ortiz

NFC: trf7970a: Fix inaccurate comment in trf7970a_probe()

As of commit ce69b95c ("NFC: Make EN2 pin optional in the
TRF7970A driver"), only the GPIO for the 'EN' enable pin needs
to be specified in the device tree so update the comments that
says both 'EN' and 'EN2' must be specified.
Signed-off-by: default avatarMark Greer <mgreer@animalcreek.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 67dec192
...@@ -2046,7 +2046,7 @@ static int trf7970a_probe(struct spi_device *spi) ...@@ -2046,7 +2046,7 @@ static int trf7970a_probe(struct spi_device *spi)
if (of_property_read_bool(np, "irq-status-read-quirk")) if (of_property_read_bool(np, "irq-status-read-quirk"))
trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ; trf->quirks |= TRF7970A_QUIRK_IRQ_STATUS_READ;
/* There are two enable pins - both must be present */ /* There are two enable pins - only EN must be present in the DT */
trf->en_gpio = of_get_named_gpio(np, "ti,enable-gpios", 0); trf->en_gpio = of_get_named_gpio(np, "ti,enable-gpios", 0);
if (!gpio_is_valid(trf->en_gpio)) { if (!gpio_is_valid(trf->en_gpio)) {
dev_err(trf->dev, "No EN GPIO property\n"); dev_err(trf->dev, "No EN GPIO property\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment