RDMA/hns: Fix the chip hanging caused by sending mailbox&CMQ during reset

On hi08 chip, There is a possibility of chip hanging and some errors when
sending mailbox & doorbell during reset.  We can fix it by prohibiting
mailbox and doorbell during reset and reset occurred to ensure that
hardware can work normally.

Fixes: a04ff739 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

drivers/infiniband/hw/hns/hns_roce_cmd.c

@@ -176,17 +176,33 @@ int hns_roce_cmd_mbox(struct hns_roce_dev *hr_dev, u64 in_param, u64 out_param,
 		      unsigned long in_modifier, u8 op_modifier, u16 op,
 		      unsigned long timeout)
 {
-	if (hr_dev->is_reset)
-		return 0;
+	int ret;
+
+	if (hr_dev->hw->rst_prc_mbox) {
+		ret = hr_dev->hw->rst_prc_mbox(hr_dev);
+		if (ret == CMD_RST_PRC_SUCCESS)
+			return 0;
+		else if (ret == CMD_RST_PRC_EBUSY)
+			return -EBUSY;
+	}
 
 	if (hr_dev->cmd.use_events)
-		return hns_roce_cmd_mbox_wait(hr_dev, in_param, out_param,
-					      in_modifier, op_modifier, op,
-					      timeout);
+		ret = hns_roce_cmd_mbox_wait(hr_dev, in_param, out_param,
+					     in_modifier, op_modifier, op,
+					     timeout);
 	else
-		return hns_roce_cmd_mbox_poll(hr_dev, in_param, out_param,
-					      in_modifier, op_modifier, op,
-					      timeout);
+		ret = hns_roce_cmd_mbox_poll(hr_dev, in_param, out_param,
+					     in_modifier, op_modifier, op,
+					     timeout);
+
+	if (ret == CMD_RST_PRC_EBUSY)
+		return -EBUSY;
+
+	if (ret && (hr_dev->hw->rst_prc_mbox &&
+		    hr_dev->hw->rst_prc_mbox(hr_dev) == CMD_RST_PRC_SUCCESS))
+		return 0;
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(hns_roce_cmd_mbox);
 

drivers/infiniband/hw/hns/hns_roce_device.h

@@ -237,6 +237,12 @@ enum {
 	HNS_ROCE_RST_DIRECT_RETURN		= 0,
 };
 
+enum {
+	CMD_RST_PRC_OTHERS,
+	CMD_RST_PRC_SUCCESS,
+	CMD_RST_PRC_EBUSY,
+};
+
 #define HNS_ROCE_CMD_SUCCESS			1
 
 #define HNS_ROCE_PORT_DOWN			0
@@ -874,6 +880,7 @@ struct hns_roce_hw {
 			 u64 out_param, u32 in_modifier, u8 op_modifier, u16 op,
 			 u16 token, int event);
 	int (*chk_mbox)(struct hns_roce_dev *hr_dev, unsigned long timeout);
+	int (*rst_prc_mbox)(struct hns_roce_dev *hr_dev);
 	int (*set_gid)(struct hns_roce_dev *hr_dev, u8 port, int gid_index,
 		       const union ib_gid *gid, const struct ib_gid_attr *attr);
 	int (*set_mac)(struct hns_roce_dev *hr_dev, u8 phy_port, u8 *addr);

drivers/infiniband/hw/hns/hns_roce_hw_v2.c

@@ -712,6 +712,110 @@ static int hns_roce_v2_post_recv(struct ib_qp *ibqp,
 	return ret;
 }
 
+static int hns_roce_v2_cmd_hw_reseted(struct hns_roce_dev *hr_dev,
+				      unsigned long instance_stage,
+				      unsigned long reset_stage)
+{
+	/* When hardware reset has been completed once or more, we should stop
+	 * sending mailbox&cmq to hardware. If now in .init_instance()
+	 * function, we should exit with error. If now at HNAE3_INIT_CLIENT
+	 * stage of soft reset process, we should exit with error, and then
+	 * HNAE3_INIT_CLIENT related process can rollback the operation like
+	 * notifing hardware to free resources, HNAE3_INIT_CLIENT related
+	 * process will exit with error to notify NIC driver to reschedule soft
+	 * reset process once again.
+	 */
+	hr_dev->is_reset = true;
+
+	if (reset_stage == HNS_ROCE_STATE_RST_INIT ||
+	    instance_stage == HNS_ROCE_STATE_INIT)
+		return CMD_RST_PRC_EBUSY;
+
+	return CMD_RST_PRC_SUCCESS;
+}
+
+static int hns_roce_v2_cmd_hw_resetting(struct hns_roce_dev *hr_dev,
+					unsigned long instance_stage,
+					unsigned long reset_stage)
+{
+	struct hns_roce_v2_priv *priv = (struct hns_roce_v2_priv *)hr_dev->priv;
+	struct hnae3_handle *handle = priv->handle;
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+
+	/* When hardware reset is detected, we should stop sending mailbox&cmq
+	 * to hardware. If now in .init_instance() function, we should
+	 * exit with error. If now at HNAE3_INIT_CLIENT stage of soft reset
+	 * process, we should exit with error, and then HNAE3_INIT_CLIENT
+	 * related process can rollback the operation like notifing hardware to
+	 * free resources, HNAE3_INIT_CLIENT related process will exit with
+	 * error to notify NIC driver to reschedule soft reset process once
+	 * again.
+	 */
+	if (!ops->get_hw_reset_stat(handle))
+		hr_dev->is_reset = true;
+
+	if (!hr_dev->is_reset || reset_stage == HNS_ROCE_STATE_RST_INIT ||
+	    instance_stage == HNS_ROCE_STATE_INIT)
+		return CMD_RST_PRC_EBUSY;
+
+	return CMD_RST_PRC_SUCCESS;
+}
+
+static int hns_roce_v2_cmd_sw_resetting(struct hns_roce_dev *hr_dev)
+{
+	struct hns_roce_v2_priv *priv = (struct hns_roce_v2_priv *)hr_dev->priv;
+	struct hnae3_handle *handle = priv->handle;
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+
+	/* When software reset is detected at .init_instance() function, we
+	 * should stop sending mailbox&cmq to hardware, and exit with
+	 * error.
+	 */
+	if (ops->ae_dev_reset_cnt(handle) != hr_dev->reset_cnt)
+		hr_dev->is_reset = true;
+
+	return CMD_RST_PRC_EBUSY;
+}
+
+static int hns_roce_v2_rst_process_cmd(struct hns_roce_dev *hr_dev)
+{
+	struct hns_roce_v2_priv *priv = (struct hns_roce_v2_priv *)hr_dev->priv;
+	struct hnae3_handle *handle = priv->handle;
+	const struct hnae3_ae_ops *ops = handle->ae_algo->ops;
+	unsigned long instance_stage;	/* the current instance stage */
+	unsigned long reset_stage;	/* the current reset stage */
+	unsigned long reset_cnt;
+	bool sw_resetting;
+	bool hw_resetting;
+
+	if (hr_dev->is_reset)
+		return CMD_RST_PRC_SUCCESS;
+
+	/* Get information about reset from NIC driver or RoCE driver itself,
+	 * the meaning of the following variables from NIC driver are described
+	 * as below:
+	 * reset_cnt -- The count value of completed hardware reset.
+	 * hw_resetting -- Whether hardware device is resetting now.
+	 * sw_resetting -- Whether NIC's software reset process is running now.
+	 */
+	instance_stage = handle->rinfo.instance_state;
+	reset_stage = handle->rinfo.reset_state;
+	reset_cnt = ops->ae_dev_reset_cnt(handle);
+	hw_resetting = ops->get_hw_reset_stat(handle);
+	sw_resetting = ops->ae_dev_resetting(handle);
+
+	if (reset_cnt != hr_dev->reset_cnt)
+		return hns_roce_v2_cmd_hw_reseted(hr_dev, instance_stage,
+						  reset_stage);
+	else if (hw_resetting)
+		return hns_roce_v2_cmd_hw_resetting(hr_dev, instance_stage,
+						    reset_stage);
+	else if (sw_resetting && instance_stage == HNS_ROCE_STATE_INIT)
+		return hns_roce_v2_cmd_sw_resetting(hr_dev);
+
+	return 0;
+}
+
 static int hns_roce_cmq_space(struct hns_roce_v2_cmq_ring *ring)
 {
 	int ntu = ring->next_to_use;
@@ -892,8 +996,8 @@ static int hns_roce_cmq_csq_clean(struct hns_roce_dev *hr_dev)
 	return clean;
 }
 
-static int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
-			     struct hns_roce_cmq_desc *desc, int num)
+static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
+			       struct hns_roce_cmq_desc *desc, int num)
 {
 	struct hns_roce_v2_priv *priv = (struct hns_roce_v2_priv *)hr_dev->priv;
 	struct hns_roce_v2_cmq_ring *csq = &priv->cmq.csq;
@@ -905,9 +1009,6 @@ static int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
 	int ret = 0;
 	int ntc;
 
-	if (hr_dev->is_reset)
-		return 0;
-
 	spin_lock_bh(&csq->lock);
 
 	if (num > hns_roce_cmq_space(csq)) {
@@ -982,6 +1083,30 @@ static int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
 	return ret;
 }
 
+int hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
+			     struct hns_roce_cmq_desc *desc, int num)
+{
+	int retval;
+	int ret;
+
+	ret = hns_roce_v2_rst_process_cmd(hr_dev);
+	if (ret == CMD_RST_PRC_SUCCESS)
+		return 0;
+	if (ret == CMD_RST_PRC_EBUSY)
+		return ret;
+
+	ret = __hns_roce_cmq_send(hr_dev, desc, num);
+	if (ret) {
+		retval = hns_roce_v2_rst_process_cmd(hr_dev);
+		if (retval == CMD_RST_PRC_SUCCESS)
+			return 0;
+		else if (retval == CMD_RST_PRC_EBUSY)
+			return retval;
+	}
+
+	return ret;
+}
+
 static int hns_roce_cmq_query_hw_info(struct hns_roce_dev *hr_dev)
 {
 	struct hns_roce_query_version *resp;
@@ -1857,6 +1982,9 @@ static int hns_roce_v2_chk_mbox(struct hns_roce_dev *hr_dev,
 
 	status = hns_roce_v2_cmd_complete(hr_dev);
 	if (status != 0x1) {
+		if (status == CMD_RST_PRC_EBUSY)
+			return status;
+
 		dev_err(dev, "mailbox status 0x%x!\n", status);
 		return -EBUSY;
 	}
@@ -5977,6 +6105,7 @@ static const struct hns_roce_hw hns_roce_hw_v2 = {
 	.hw_exit = hns_roce_v2_exit,
 	.post_mbox = hns_roce_v2_post_mbox,
 	.chk_mbox = hns_roce_v2_chk_mbox,
+	.rst_prc_mbox = hns_roce_v2_rst_process_cmd,
 	.set_gid = hns_roce_v2_set_gid,
 	.set_mac = hns_roce_v2_set_mac,
 	.write_mtpt = hns_roce_v2_write_mtpt,

drivers/infiniband/hw/hns/hns_roce_hw_v2.h

@@ -96,6 +96,8 @@
 #define HNS_ROCE_V2_UC_RC_SGE_NUM_IN_WQE	2
 #define HNS_ROCE_V2_RSV_QPS			8
 
+#define HNS_ROCE_V2_HW_RST_TIMEOUT             1000
+
 #define HNS_ROCE_CONTEXT_HOP_NUM		1
 #define HNS_ROCE_SCCC_HOP_NUM			1
 #define HNS_ROCE_MTT_HOP_NUM			1