Commit 6a1c9aaf authored by Tinghan Shen's avatar Tinghan Shen Committed by Mathieu Poirier

remoteproc: mediatek: Add MT8195 SCP core 1 operations

The SCP rproc driver has a set of chip dependent callbacks for
boot sequence and IRQ handling. Implement these callbacks for MT8195
SCP core 1.
Signed-off-by: default avatarTinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
Tested-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230901080935.14571-5-tinghan.shen@mediatek.comSigned-off-by: default avatarMathieu Poirier <mathieu.poirier@linaro.org>
parent 6b55b1e2
......@@ -47,6 +47,7 @@
#define MT8192_SCP2SPM_IPC_CLR 0x4094
#define MT8192_GIPC_IN_SET 0x4098
#define MT8192_HOST_IPC_INT_BIT BIT(0)
#define MT8195_CORE1_HOST_IPC_INT_BIT BIT(4)
#define MT8192_CORE0_SW_RSTN_CLR 0x10000
#define MT8192_CORE0_SW_RSTN_SET 0x10004
......@@ -56,6 +57,14 @@
#define MT8195_L1TCM_SRAM_PDN_RESERVED_RSI_BITS GENMASK(7, 4)
#define MT8195_CPU1_SRAM_PD 0x1084
#define MT8195_SSHUB2APMCU_IPC_SET 0x4088
#define MT8195_SSHUB2APMCU_IPC_CLR 0x408C
#define MT8195_CORE1_SW_RSTN_CLR 0x20000
#define MT8195_CORE1_SW_RSTN_SET 0x20004
#define MT8195_CORE1_MEM_ATT_PREDEF 0x20008
#define MT8195_CORE1_WDT_CFG 0x20034
#define SCP_FW_VER_LEN 32
#define SCP_SHARE_BUFFER_SIZE 288
......
......@@ -176,6 +176,16 @@ static void mt8192_scp_reset_deassert(struct mtk_scp *scp)
writel(1, scp->reg_base + MT8192_CORE0_SW_RSTN_CLR);
}
static void mt8195_scp_c1_reset_assert(struct mtk_scp *scp)
{
writel(1, scp->reg_base + MT8195_CORE1_SW_RSTN_SET);
}
static void mt8195_scp_c1_reset_deassert(struct mtk_scp *scp)
{
writel(1, scp->reg_base + MT8195_CORE1_SW_RSTN_CLR);
}
static void mt8183_scp_irq_handler(struct mtk_scp *scp)
{
u32 scp_to_host;
......@@ -212,6 +222,18 @@ static void mt8192_scp_irq_handler(struct mtk_scp *scp)
}
}
static void mt8195_scp_c1_irq_handler(struct mtk_scp *scp)
{
u32 scp_to_host;
scp_to_host = readl(scp->reg_base + MT8195_SSHUB2APMCU_IPC_SET);
if (scp_to_host & MT8192_SCP_IPC_INT_BIT)
scp_ipi_handler(scp);
writel(scp_to_host, scp->reg_base + MT8195_SSHUB2APMCU_IPC_CLR);
}
static irqreturn_t scp_irq_handler(int irq, void *priv)
{
struct mtk_scp *scp = priv;
......@@ -453,6 +475,18 @@ static int mt8195_scp_before_load(struct mtk_scp *scp)
return 0;
}
static int mt8195_scp_c1_before_load(struct mtk_scp *scp)
{
scp->data->scp_reset_assert(scp);
scp_sram_power_on(scp->reg_base + MT8195_CPU1_SRAM_PD, 0);
/* enable MPU for all memory regions */
writel(0xff, scp->reg_base + MT8195_CORE1_MEM_ATT_PREDEF);
return 0;
}
static int scp_load(struct rproc *rproc, const struct firmware *fw)
{
struct mtk_scp *scp = rproc->priv;
......@@ -625,6 +659,15 @@ static void mt8195_scp_stop(struct mtk_scp *scp)
writel(0, scp->reg_base + MT8192_CORE0_WDT_CFG);
}
static void mt8195_scp_c1_stop(struct mtk_scp *scp)
{
/* Power off CPU SRAM */
scp_sram_power_off(scp->reg_base + MT8195_CPU1_SRAM_PD, 0);
/* Disable SCP watchdog */
writel(0, scp->reg_base + MT8195_CORE1_WDT_CFG);
}
static int scp_stop(struct rproc *rproc)
{
struct mtk_scp *scp = rproc->priv;
......@@ -989,6 +1032,18 @@ static const struct mtk_scp_of_data mt8195_of_data = {
.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
};
static const struct mtk_scp_of_data mt8195_of_data_c1 = {
.scp_clk_get = mt8195_scp_clk_get,
.scp_before_load = mt8195_scp_c1_before_load,
.scp_irq_handler = mt8195_scp_c1_irq_handler,
.scp_reset_assert = mt8195_scp_c1_reset_assert,
.scp_reset_deassert = mt8195_scp_c1_reset_deassert,
.scp_stop = mt8195_scp_c1_stop,
.scp_da_to_va = mt8192_scp_da_to_va,
.host_to_scp_reg = MT8192_GIPC_IN_SET,
.host_to_scp_int_bit = MT8195_CORE1_HOST_IPC_INT_BIT,
};
static const struct of_device_id mtk_scp_of_match[] = {
{ .compatible = "mediatek,mt8183-scp", .data = &mt8183_of_data },
{ .compatible = "mediatek,mt8186-scp", .data = &mt8186_of_data },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment