Skip to content

L
linux
Commit 6a28a69a authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Greg Kroah-Hartman
Browse files
Options

Staging: rt2860: remove CONFIG_STA_SUPPORT ifdefs 

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 2bc1c810
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 44 additions and 561 deletions
drivers/staging/rt2860/2860_main_dev.c
View file @ 6a28a69a
......@@ -103,13 +103,10 @@ static struct pci_device_id rt2860_pci_tbl[] __devinitdata =
};
MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl);
#ifdef CONFIG_STA_SUPPORT
MODULE_LICENSE("GPL");
#ifdef MODULE_VERSION
MODULE_VERSION(STA_DRIVER_VERSION);
#endif
#endif // CONFIG_STA_SUPPORT //
//
// Our PCI driver structure
......@@ -479,10 +476,9 @@ static void rx_done_tasklet(unsigned long data)
pObj = (POS_COOKIE) pAd->OS_Cookie;
pAd->int_pending &= ~(INT_RX);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
bReschedule = STARxDoneInterruptHandle(pAd, 0);
#endif // CONFIG_STA_SUPPORT //
RTMP_INT_LOCK(&pAd->irq_lock, flags);
/*
......@@ -918,15 +914,11 @@ rt2860_interrupt(int irq, void *dev_instance)
RTMPHandleTBTTInterrupt(pAd);
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (IntSource.word & AutoWakeupInt)
RTMPHandleTwakeupInterrupt(pAd);
}
#endif // CONFIG_STA_SUPPORT //
return IRQ_HANDLED;
}
......@@ -1195,7 +1187,6 @@ VOID RT28xx_UpdateBeaconToAsic(
}
#ifdef CONFIG_STA_SUPPORT
VOID RTMPInitPCIeLinkCtrlValue(
IN PRTMP_ADAPTER pAd)
{
......@@ -1239,7 +1230,6 @@ VOID RTMPPCIeLinkCtrlSetting(
IN USHORT Max)
{
}
#endif // CONFIG_STA_SUPPORT //
VOID rt2860_stop(struct net_device *net_dev)
{
......
drivers/staging/rt2860/Makefile
View file @ 6a28a69a
......@@ -2,7 +2,6 @@ obj-$(CONFIG_RT2860) += rt2860sta.o
# TODO: all of these should be removed
EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
EXTRA_CFLAGS += -DDBG
EXTRA_CFLAGS += -DDOT11_N_SUPPORT
EXTRA_CFLAGS += -DWPA_SUPPLICANT_SUPPORT
......
drivers/staging/rt2860/common/action.c
View file @ 6a28a69a
......@@ -128,7 +128,6 @@ VOID MlmeADDBAAction(
pBAEntry =&pAd->BATable.BAOriEntry[Idx];
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (ADHOC_ON(pAd))
......@@ -136,7 +135,6 @@ VOID MlmeADDBAAction(
else
ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
}
#endif // CONFIG_STA_SUPPORT //
Frame.Category = CATEGORY_BA;
Frame.Action = ADDBA_REQ;
......@@ -211,10 +209,9 @@ VOID MlmeDELBAAction(
// SEND BAR (Send BAR to refresh peer reordering buffer.)
Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
#endif // CONFIG_STA_SUPPORT //
FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
......@@ -232,7 +229,7 @@ VOID MlmeDELBAAction(
// SEND DELBA FRAME
FrameLen = 0;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (ADHOC_ON(pAd))
......@@ -240,7 +237,7 @@ VOID MlmeDELBAAction(
else
ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
}
#endif // CONFIG_STA_SUPPORT //
Frame.Category = CATEGORY_BA;
Frame.Action = DELBA;
Frame.DelbaParm.Initiator = pInfo->Initiator;
......@@ -367,7 +364,6 @@ static VOID respond_ht_information_exchange_action(
NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
// 2-1. Prepare ADDBA Response frame.
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (ADHOC_ON(pAd))
......@@ -375,7 +371,6 @@ static VOID respond_ht_information_exchange_action(
else
ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
}
#endif // CONFIG_STA_SUPPORT //
HTINFOframe.Category = CATEGORY_HT;
HTINFOframe.Action = HT_INFO_EXCHANGE;
......@@ -404,7 +399,7 @@ VOID PeerHTAction(
{
case NOTIFY_BW_ACTION:
DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
#ifdef CONFIG_STA_SUPPORT
if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
{
// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
......@@ -414,7 +409,6 @@ VOID PeerHTAction(
Elem->Msg[LENGTH_802_11+2] ));
break;
}
#endif // CONFIG_STA_SUPPORT //
if (Elem->Msg[LENGTH_802_11+2] == 0) // 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
......@@ -534,10 +528,9 @@ VOID SendRefreshBAR(
}
Sequence = pEntry->TxSeq[TID];
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
#endif // CONFIG_STA_SUPPORT //
FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
......
drivers/staging/rt2860/common/ba_action.c
View file @ 6a28a69a
......@@ -132,10 +132,8 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER pAd,
// pass this 802.3 packet to upper layer or forward this packet to WM directly
//
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
#endif // CONFIG_STA_SUPPORT //
}
}
......@@ -610,11 +608,8 @@ VOID BAOriSessionAdd(
return;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
#endif // CONFIG_STA_SUPPORT //
FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
......@@ -1083,14 +1078,12 @@ VOID BAOriSessionSetupTimeout(
pAd = pBAEntry->pAdapter;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// Do nothing if monitor mode is on
if (MONITOR_ON(pAd))
return;
}
#endif // CONFIG_STA_SUPPORT //
pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
......@@ -1223,8 +1216,8 @@ VOID PeerAddBAReqAction(
}
NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
// 2-1. Prepare ADDBA Response frame.
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (ADHOC_ON(pAd))
......@@ -1232,7 +1225,7 @@ VOID PeerAddBAReqAction(
else
ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
}
#endif // CONFIG_STA_SUPPORT //
ADDframe.Category = CATEGORY_BA;
ADDframe.Action = ADDBA_RESP;
ADDframe.Token = pAddreqFrame->Token;
......@@ -1299,9 +1292,7 @@ VOID PeerAddBARspAction(
}
// Rcv Decline StatusCode
if ((pFrame->StatusCode == 37)
#ifdef CONFIG_STA_SUPPORT
|| ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
#endif // CONFIG_STA_SUPPORT //
)
{
pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
......@@ -1422,10 +1413,9 @@ VOID SendPSMPAction(
DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
return;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
#endif // CONFIG_STA_SUPPORT //
Frame.Category = CATEGORY_HT;
Frame.Action = SMPS_ACTION;
......@@ -1490,10 +1480,8 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
// a. pointer pRxBlk->pData to payload
// b. modify pRxBlk->DataSize
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
#endif // CONFIG_STA_SUPPORT //
ASSERT(pRxBlk->pRxPacket);
pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
......@@ -1508,15 +1496,12 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
//
if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef LINUX
NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
#endif
}
#endif // CONFIG_STA_SUPPORT //
}
}
......
drivers/staging/rt2860/common/cmm_data.c
View file @ 6a28a69a
......@@ -339,15 +339,13 @@ NDIS_STATUS MlmeHardTransmitTxRing(
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// outgoing frame always wakeup PHY to prevent frame lost
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, FROM_TX);
}
#endif // CONFIG_STA_SUPPORT //
pFirstTxWI =(PTXWI_STRUC)pSrcBufVA;
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXWI_SIZE);
......@@ -377,7 +375,7 @@ NDIS_STATUS MlmeHardTransmitTxRing(
//
//
// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
#ifdef CONFIG_STA_SUPPORT
// Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
if (pHeader_802_11->FC.Type != BTYPE_DATA)
{
......@@ -390,7 +388,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
pHeader_802_11->FC.PwrMgmt = pAd->CommonCfg.bAPSDForcePowerSave;
}
}
#endif // CONFIG_STA_SUPPORT //
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
......@@ -504,14 +501,12 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// outgoing frame always wakeup PHY to prevent frame lost
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
AsicForceWakeup(pAd, FROM_TX);
}
#endif // CONFIG_STA_SUPPORT //
pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA + TXINFO_SIZE);
pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
......@@ -535,7 +530,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
......@@ -551,7 +545,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
}
}
#endif // CONFIG_STA_SUPPORT //
//
// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
......@@ -561,7 +554,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
//
// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
#ifdef CONFIG_STA_SUPPORT
// Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
{
......@@ -571,18 +564,15 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
else
pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
}
#endif // CONFIG_STA_SUPPORT //
bInsertTimestamp = FALSE;
if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
{
#ifdef CONFIG_STA_SUPPORT
//Set PM bit in ps-poll, to fix WLK 1.2 PowerSaveMode_ext failure issue.
if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
{
pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
}
#endif // CONFIG_STA_SUPPORT //
bAckRequired = FALSE;
}
else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
......@@ -845,8 +835,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
......@@ -854,7 +842,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED))
TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
}
#endif // CONFIG_STA_SUPPORT //
}
if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
......@@ -934,13 +921,10 @@ BOOLEAN CanDoAggregateTransmit(
return FALSE;
}
#ifdef CONFIG_STA_SUPPORT
if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
return TRUE;
else
#endif // CONFIG_STA_SUPPORT //
return FALSE;
}
......@@ -1133,10 +1117,8 @@ VOID RTMPDeQueuePacket(
Count += pTxBlk->TxPacketList.Number;
// Do HardTransmit now.
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
#endif // CONFIG_STA_SUPPORT //
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
// static rate also need NICUpdateFifoStaCounters() function.
......@@ -2178,7 +2160,6 @@ UINT deaggregate_AMSDU_announce(
// convert to 802.3 header
CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
#ifdef CONFIG_STA_SUPPORT
if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
{
// avoid local heap overflow, use dyanamic allocation
......@@ -2188,9 +2169,7 @@ UINT deaggregate_AMSDU_announce(
WpaEAPOLKeyAction(pAd, Elem);
kfree(Elem);
}
#endif // CONFIG_STA_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (pRemovedLLCSNAP)
......@@ -2200,15 +2179,12 @@ UINT deaggregate_AMSDU_announce(
NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
}
}
#endif // CONFIG_STA_SUPPORT //
pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
if (pClonePacket)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
#endif // CONFIG_STA_SUPPORT //
}
......@@ -2304,11 +2280,11 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
return NULL;
FirstWcid = 1;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
if (pAd->StaCfg.BssType == BSS_INFRA)
FirstWcid = 2;
#endif // CONFIG_STA_SUPPORT //
// allocate one MAC entry
NdisAcquireSpinLock(&pAd->MacTabLock);
......@@ -2331,8 +2307,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
}
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pEntry->ValidAsCLI = TRUE;
......@@ -2341,7 +2315,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
pEntry->ValidAsMesh = FALSE;
pEntry->ValidAsDls = FALSE;
}
#endif // CONFIG_STA_SUPPORT //
}
pEntry->bIAmBadAtheros = FALSE;
......@@ -2362,8 +2335,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
pEntry->apidx = apidx;
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pEntry->AuthMode = pAd->StaCfg.AuthMode;
......@@ -2371,19 +2342,18 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i);
}
#endif // CONFIG_STA_SUPPORT //
}
pEntry->GTKState = REKEY_NEGOTIATING;
pEntry->PairwiseKey.KeyLen = 0;
pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
#ifdef CONFIG_STA_SUPPORT
if ((pAd->OpMode == OPMODE_STA) &&
(pAd->StaCfg.BssType == BSS_ADHOC))
pEntry->PortSecured = WPA_802_1X_PORT_SECURED;
else
#endif // CONFIG_STA_SUPPORT //
pEntry->PortSecured = WPA_802_1X_PORT_NOT_SECURED;
pEntry->PMKID_CacheIdx = ENTRY_NOT_FOUND;
COPY_MAC_ADDR(pEntry->Addr, pAddr);
pEntry->Sst = SST_NOT_AUTH;
......@@ -2858,10 +2828,8 @@ VOID Indicate_Legacy_Packet(
// 2. remove LLC
// a. pointer pRxBlk->pData to payload
// b. modify pRxBlk->DataSize
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
#endif // CONFIG_STA_SUPPORT //
if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
{
......@@ -2880,11 +2848,8 @@ VOID Indicate_Legacy_Packet(
//
// pass this 802.3 packet to upper layer or forward this packet to WM directly
//
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //
}
......@@ -2947,11 +2912,8 @@ VOID CmmRxRalinkFrameIndicate(
}
// get 802.3 Header and remove LLC
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
#endif // CONFIG_STA_SUPPORT //
ASSERT(pRxBlk->pRxPacket);
......@@ -2961,10 +2923,9 @@ VOID CmmRxRalinkFrameIndicate(
Payload2Size = Msdu2Size - LENGTH_802_3;
pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //
if (!pPacket2)
{
......@@ -2977,17 +2938,13 @@ VOID CmmRxRalinkFrameIndicate(
pRxBlk->DataSize = Payload1Size;
wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //
if (pPacket2)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
#endif // CONFIG_STA_SUPPORT //
}
}
......@@ -3130,15 +3087,12 @@ VOID Indicate_EAPOL_Packet(
{
MAC_TABLE_ENTRY *pEntry = NULL;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pEntry = &pAd->MacTab.Content[BSSID_WCID];
STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
return;
}
#endif // CONFIG_STA_SUPPORT //
if (pEntry == NULL)
{
......
drivers/staging/rt2860/common/cmm_data_2860.c
View file @ 6a28a69a
......@@ -386,8 +386,6 @@ int RtmpPCIMgmtKickOut(
return 0;
}
#ifdef CONFIG_STA_SUPPORT
/*
========================================================================
......@@ -1041,8 +1039,6 @@ VOID RadioOnExec(
}
}
#endif // CONFIG_STA_SUPPORT //
VOID RT28xxPciMlmeRadioOn(
IN PRTMP_ADAPTER pAd)
{
......@@ -1076,7 +1072,6 @@ VOID RT28xxPciMlmeRadioOn(
RTMPSetLED(pAd, LED_RADIO_ON);
}
#ifdef CONFIG_STA_SUPPORT
if ((pAd->OpMode == OPMODE_STA) &&
(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)))
{
......@@ -1089,7 +1084,6 @@ VOID RT28xxPciMlmeRadioOn(
RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
RTMPSetTimer(&pAd->Mlme.RadioOnOffTimer, 10);
}
#endif // CONFIG_STA_SUPPORT //
}
VOID RT28xxPciMlmeRadioOFF(
......@@ -1112,7 +1106,6 @@ VOID RT28xxPciMlmeRadioOFF(
// Set LED
RTMPSetLED(pAd, LED_RADIO_OFF);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
BOOLEAN Cancelled;
......@@ -1162,7 +1155,6 @@ VOID RT28xxPciMlmeRadioOFF(
return;
}
}
#endif // CONFIG_STA_SUPPORT //
// Set Radio off flag
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
......
drivers/staging/rt2860/common/cmm_info.c
View file @ 6a28a69a
......@@ -133,11 +133,9 @@ INT Show_IEEE80211H_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf);
#ifdef CONFIG_STA_SUPPORT
INT Show_NetworkType_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf);
#endif // CONFIG_STA_SUPPORT //
INT Show_AuthMode_Proc(
IN PRTMP_ADAPTER pAd,
......@@ -207,9 +205,7 @@ static struct {
{"WmmCapable", Show_WmmCapable_Proc},
#endif
{"IEEE80211H", Show_IEEE80211H_Proc},
#ifdef CONFIG_STA_SUPPORT
{"NetworkType", Show_NetworkType_Proc},
#endif // CONFIG_STA_SUPPORT //
{"AuthMode", Show_AuthMode_Proc},
{"EncrypType", Show_EncrypType_Proc},
{"DefaultKeyID", Show_DefaultKeyID_Proc},
......@@ -233,11 +229,8 @@ INT Set_DriverVersion_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
#endif // CONFIG_STA_SUPPORT //
return TRUE;
}
......@@ -347,8 +340,6 @@ INT Set_WirelessMode_Proc(
WirelessMode = simple_strtol(arg, 0, 10);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
INT MaxPhyMode = PHY_11G;
......@@ -385,7 +376,6 @@ INT Set_WirelessMode_Proc(
success = FALSE;
}
}
#endif // CONFIG_STA_SUPPORT //
// it is needed to set SSID to take effect
if (success == TRUE)
......@@ -423,7 +413,6 @@ INT Set_Channel_Proc(
// check if this channel is valid
if (ChannelSanity(pAd, Channel) == TRUE)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pAd->CommonCfg.Channel = Channel;
......@@ -450,16 +439,12 @@ INT Set_Channel_Proc(
}
}
}
#endif // CONFIG_STA_SUPPORT //
success = TRUE;
}
else
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
success = FALSE;
#endif // CONFIG_STA_SUPPORT //
}
......@@ -515,14 +500,11 @@ INT Set_TxPower_Proc(
TxPower = (ULONG) simple_strtol(arg, 0, 10);
if (TxPower <= 100)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pAd->CommonCfg.TxPowerDefault = TxPower;
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
}
#endif // CONFIG_STA_SUPPORT //
success = TRUE;
}
else
......@@ -587,22 +569,18 @@ INT Set_TxPreamble_Proc(
{
case Rt802_11PreambleShort:
pAd->CommonCfg.TxPreamble = Preamble;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
#endif // CONFIG_STA_SUPPORT //
break;
case Rt802_11PreambleLong:
#ifdef CONFIG_STA_SUPPORT
case Rt802_11PreambleAuto:
// if user wants AUTO, initialize to LONG here, then change according to AP's
// capability upon association.
#endif // CONFIG_STA_SUPPORT //
pAd->CommonCfg.TxPreamble = Preamble;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
#endif // CONFIG_STA_SUPPORT //
break;
default: //Invalid argument
return FALSE;
......@@ -631,10 +609,8 @@ INT Set_RTSThreshold_Proc(
if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh;
#ifdef CONFIG_STA_SUPPORT
else if (RtsThresh == 0)
pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
#endif // CONFIG_STA_SUPPORT //
else
return FALSE; //Invalid argument
......@@ -675,7 +651,6 @@ INT Set_FragThreshold_Proc(
pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
......@@ -683,7 +658,6 @@ INT Set_FragThreshold_Proc(
else
pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
}
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
......@@ -904,7 +878,6 @@ BOOLEAN RTMPCheckStrPrintAble(
========================================================================
*/
#ifdef CONFIG_STA_SUPPORT
VOID RTMPSetDesiredRates(
IN PRTMP_ADAPTER pAdapter,
IN LONG Rates)
......@@ -1117,10 +1090,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc(
return (Status);
}
#endif // CONFIG_STA_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
/*
========================================================================
......@@ -1170,7 +1140,6 @@ VOID RTMPWPARemoveAllKeys(
}
}
#endif // CONFIG_STA_SUPPORT //
/*
========================================================================
......@@ -1214,10 +1183,8 @@ VOID RTMPSetPhyMode(
if (i == pAd->ChannelListNum)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
pAd->CommonCfg.Channel = FirstChannel(pAd);
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
}
......@@ -1528,14 +1495,10 @@ VOID RTMPSetHT(
}
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
RTMPSetIndividualHT(pAd, 0);
}
#endif // CONFIG_STA_SUPPORT //
}
/*
......@@ -1560,8 +1523,6 @@ VOID RTMPSetIndividualHT(
do
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
......@@ -1569,7 +1530,6 @@ VOID RTMPSetIndividualHT(
//pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
break;
}
#endif // CONFIG_STA_SUPPORT //
} while (FALSE);
if (pDesired_ht_phy == NULL)
......@@ -1721,7 +1681,6 @@ VOID RTMPAddWcidAttributeEntry(
USHORT Wcid = 0;
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (BssIdx > BSS0)
......@@ -1742,13 +1701,11 @@ VOID RTMPAddWcidAttributeEntry(
else
Wcid = MCAST_WCID;
}
#endif // CONFIG_STA_SUPPORT //
}
// Update WCID attribute table
offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (pEntry && pEntry->ValidAsMesh)
......@@ -1756,7 +1713,6 @@ VOID RTMPAddWcidAttributeEntry(
else
WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
}
#endif // CONFIG_STA_SUPPORT //
RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
......@@ -1887,11 +1843,10 @@ VOID RTMPIoctlGetSiteSurvey(
"Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT");
WaitCnt = 0;
#ifdef CONFIG_STA_SUPPORT
pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
OS_WAIT(500);
#endif // CONFIG_STA_SUPPORT //
for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
{
......@@ -1957,9 +1912,7 @@ VOID RTMPIoctlGetSiteSurvey(
sprintf(msg+strlen(msg),"\n");
}
#ifdef CONFIG_STA_SUPPORT
pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
#endif // CONFIG_STA_SUPPORT //
wrq->u.data.length = strlen(msg);
Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
......@@ -2257,9 +2210,7 @@ INT Set_HtMcs_Proc(
IN PUCHAR arg)
{
ULONG HtMcs, Mcs_tmp;
#ifdef CONFIG_STA_SUPPORT
BOOLEAN bAutoRate = FALSE;
#endif // CONFIG_STA_SUPPORT //
Mcs_tmp = simple_strtol(arg, 0, 10);
......@@ -2268,7 +2219,6 @@ INT Set_HtMcs_Proc(
else
HtMcs = MCS_AUTO;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
......@@ -2304,7 +2254,6 @@ INT Set_HtMcs_Proc(
if (ADHOC_ON(pAd))
return TRUE;
}
#endif // CONFIG_STA_SUPPORT //
SetCommonHT(pAd);
......@@ -2778,10 +2727,8 @@ INT Set_FixedTxMode_Proc(
fix_tx_mode = FIXED_TXMODE_CCK;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
......@@ -2866,11 +2813,8 @@ INT Show_SSID_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
#endif // CONFIG_STA_SUPPORT //
return 0;
}
......@@ -3031,11 +2975,8 @@ INT Show_HtMcs_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
#endif // CONFIG_STA_SUPPORT //
return 0;
}
......@@ -3177,11 +3118,8 @@ INT Show_WmmCapable_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf)
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
#endif // CONFIG_STA_SUPPORT //
return 0;
}
......@@ -3195,7 +3133,6 @@ INT Show_IEEE80211H_Proc(
return 0;
}
#ifdef CONFIG_STA_SUPPORT
INT Show_NetworkType_Proc(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pBuf)
......@@ -3220,7 +3157,6 @@ INT Show_NetworkType_Proc(
}
return 0;
}
#endif // CONFIG_STA_SUPPORT //
INT Show_AuthMode_Proc(
IN PRTMP_ADAPTER pAd,
......@@ -3228,10 +3164,8 @@ INT Show_AuthMode_Proc(
{
NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
AuthMode = pAd->StaCfg.AuthMode;
#endif // CONFIG_STA_SUPPORT //
if ((AuthMode >= Ndis802_11AuthModeOpen) &&
(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
......@@ -3248,10 +3182,8 @@ INT Show_EncrypType_Proc(
{
NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
WepStatus = pAd->StaCfg.WepStatus;
#endif // CONFIG_STA_SUPPORT //
if ((WepStatus >= Ndis802_11WEPEnabled) &&
(WepStatus <= Ndis802_11Encryption4KeyAbsent))
......@@ -3268,10 +3200,8 @@ INT Show_DefaultKeyID_Proc(
{
UCHAR DefaultKeyId = 0;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
DefaultKeyId = pAd->StaCfg.DefaultKeyId;
#endif // CONFIG_STA_SUPPORT //
sprintf(pBuf, "\t%d", DefaultKeyId);
......@@ -3341,11 +3271,8 @@ INT Show_WPAPSK_Proc(
INT idx;
UCHAR PMK[32] = {0};
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
#endif // CONFIG_STA_SUPPORT //
sprintf(pBuf, "\tPMK = ");
for (idx = 0; idx < 32; idx++)
......
drivers/staging/rt2860/common/cmm_sanity.c
View file @ 6a28a69a
......@@ -275,9 +275,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
OUT PQOS_CAPABILITY_PARM pQosCapability,
OUT ULONG *pRalinkIe,
OUT UCHAR *pHtCapabilityLen,
#ifdef CONFIG_STA_SUPPORT
OUT UCHAR *pPreNHtCapabilityLen,
#endif // CONFIG_STA_SUPPORT //
OUT HT_CAPABILITY_IE *pHtCapability,
OUT UCHAR *AddHtInfoLen,
OUT ADD_HT_INFO_IE *AddHtInfo,
......@@ -286,9 +284,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
OUT PNDIS_802_11_VARIABLE_IEs pVIE)
{
CHAR *Ptr;
#ifdef CONFIG_STA_SUPPORT
CHAR TimLen;
#endif // CONFIG_STA_SUPPORT //
PFRAME_802_11 pFrame;
PEID_STRUCT pEid;
UCHAR SubType;
......@@ -316,10 +312,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
*pAironetCellPowerLimit = 0xFF; // Default of AironetCellPowerLimit is 0xFF
*LengthVIE = 0; // Set the length of VIE to init value 0
*pHtCapabilityLen = 0; // Set the length of VIE to init value 0
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
*pPreNHtCapabilityLen = 0; // Set the length of VIE to init value 0
#endif // CONFIG_STA_SUPPORT //
*AddHtInfoLen = 0; // Set the length of VIE to init value 0
*pRalinkIe = 0;
*pNewChannel = 0;
......@@ -428,7 +422,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
*pPreNHtCapabilityLen = 0; // Nnow we only support 26 bytes.
......@@ -437,7 +430,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
*LengthVIE += (pEid->Len + 2);
}
#endif // CONFIG_STA_SUPPORT //
}
else
{
......@@ -458,14 +450,12 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
Ptr = (PUCHAR) pVIE;
NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
*LengthVIE += (pEid->Len + 2);
}
#endif // CONFIG_STA_SUPPORT //
}
else
{
......@@ -492,7 +482,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
if(pEid->Len == 1)
{
*pChannel = *pEid->Octet;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (ChannelSanity(pAd, *pChannel) == 0)
......@@ -501,7 +491,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
return FALSE;
}
}
#endif // CONFIG_STA_SUPPORT //
Sanity |= 0x4;
}
else
......@@ -539,14 +529,13 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
}
break;
#ifdef CONFIG_STA_SUPPORT
case IE_TIM:
if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
{
GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
}
break;
#endif // CONFIG_STA_SUPPORT //
case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
if(pEid->Len == 3)
{
......@@ -568,7 +557,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
else
*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
}
#ifdef CONFIG_STA_SUPPORT
#ifdef DOT11_N_SUPPORT
// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
......@@ -589,7 +577,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
}
}
#endif // DOT11_N_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
{
// Copy to pVIE which will report to microsoft bssid list.
......@@ -722,7 +709,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
}
// For some 11a AP. it did not have the channel EID, patch here
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
UCHAR LatchRfChannel = MsgChannel;
......@@ -735,7 +721,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
Sanity |= 0x4;
}
}
#endif // CONFIG_STA_SUPPORT //
if (Sanity != 0x7)
{
......@@ -776,10 +761,8 @@ BOOLEAN MlmeScanReqSanity(
if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
#ifdef CONFIG_STA_SUPPORT
|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
#endif // CONFIG_STA_SUPPORT //
))
{
return TRUE;
......
drivers/staging/rt2860/common/cmm_sync.c
View file @ 6a28a69a
......@@ -383,27 +383,21 @@ VOID ScanNextChannel(
NDIS_STATUS NStatus;
ULONG FrameLen = 0;
UCHAR SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
#ifdef CONFIG_STA_SUPPORT
USHORT Status;
PHEADER_802_11 pHdr80211;
#endif // CONFIG_STA_SUPPORT //
UINT ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (MONITOR_ON(pAd))
return;
}
#endif // CONFIG_STA_SUPPORT //
if (pAd->MlmeAux.Channel == 0)
{
if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
#ifdef CONFIG_STA_SUPPORT
&& (INFRA_ON(pAd)
|| (pAd->OpMode == OPMODE_AP))
#endif // CONFIG_STA_SUPPORT //
)
{
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
......@@ -421,7 +415,6 @@ VOID ScanNextChannel(
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
//
......@@ -452,14 +445,11 @@ VOID ScanNextChannel(
Status = MLME_SUCCESS;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
}
#endif // CONFIG_STA_SUPPORT //
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
}
else
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// BBP and RF are not accessible in PS mode, we has to wake them up first
......@@ -470,12 +460,10 @@ VOID ScanNextChannel(
if (pAd->StaCfg.Psm == PWR_SAVE)
MlmeSetPsmBit(pAd, PWR_ACTIVE);
}
#endif // CONFIG_STA_SUPPORT //
AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
AsicLockChannel(pAd, pAd->MlmeAux.Channel);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (pAd->MlmeAux.Channel > 14)
......@@ -487,7 +475,6 @@ VOID ScanNextChannel(
}
}
}
#endif // CONFIG_STA_SUPPORT //
//Global country domain(ch1-11:active scan, ch12-14 passive scan)
if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
......@@ -499,7 +486,6 @@ VOID ScanNextChannel(
// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
if (ScanType == FAST_SCAN_ACTIVE)
RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
#ifdef CONFIG_STA_SUPPORT
else if (((ScanType == SCAN_CISCO_ACTIVE) ||
(ScanType == SCAN_CISCO_PASSIVE) ||
(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
......@@ -510,7 +496,6 @@ VOID ScanNextChannel(
else
RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
}
#endif // CONFIG_STA_SUPPORT //
else // must be SCAN_PASSIVE or SCAN_ACTIVE
{
if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
......@@ -535,14 +520,13 @@ VOID ScanNextChannel(
if (NStatus != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_FAIL_NO_RESOURCE;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
}
#endif // CONFIG_STA_SUPPORT //
return;
}
......@@ -615,11 +599,8 @@ VOID ScanNextChannel(
// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
#endif // CONFIG_STA_SUPPORT //
}
}
......
drivers/staging/rt2860/common/cmm_wpa.c
View file @ 6a28a69a
......@@ -370,7 +370,6 @@ static VOID RTMPInsertRsnIeCipher(
break;
}
#ifdef CONFIG_STA_SUPPORT
if ((pAd->OpMode == OPMODE_STA) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
......@@ -386,7 +385,6 @@ static VOID RTMPInsertRsnIeCipher(
break;
}
}
#endif // CONFIG_STA_SUPPORT //
// swap for big-endian platform
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
......@@ -448,7 +446,6 @@ static VOID RTMPInsertRsnIeCipher(
break;
}
#ifdef CONFIG_STA_SUPPORT
if ((pAd->OpMode == OPMODE_STA) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
......@@ -464,7 +461,6 @@ static VOID RTMPInsertRsnIeCipher(
break;
}
}
#endif // CONFIG_STA_SUPPORT //
// swap for big-endian platform
pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
......@@ -627,7 +623,6 @@ VOID RTMPMakeRSNIE(
rsnielen_ex_cur_p = NULL;
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
......@@ -660,7 +655,6 @@ VOID RTMPMakeRSNIE(
bMixCipher = pAd->StaCfg.bMixCipher;
}
#endif // CONFIG_STA_SUPPORT //
}
// indicate primary RSNIE as WPA or WPA2
......@@ -1131,11 +1125,6 @@ BOOLEAN RTMPParseEapolKeyData(
return FALSE;
}
#ifdef CONFIG_STA_SUPPORT
// Todo
#endif // CONFIG_STA_SUPPORT //
return TRUE;
}
......
drivers/staging/rt2860/common/mlme.c
View file @ 6a28a69a
This diff is collapsed.
drivers/staging/rt2860/common/rtmp_init.c
View file @ 6a28a69a
......@@ -163,19 +163,14 @@ RTMP_REG_PAIR MACRegTable[] = {
{PWR_PIN_CFG, 0x00000003}, // patch for 2880-E
};
#ifdef CONFIG_STA_SUPPORT
RTMP_REG_PAIR STAMACRegTable[] = {
{WMM_AIFSN_CFG, 0x00002273},
{WMM_CWMIN_CFG, 0x00002344},
{WMM_CWMAX_CFG, 0x000034aa},
};
#endif // CONFIG_STA_SUPPORT //
#define NUM_MAC_REG_PARMS (sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
#ifdef CONFIG_STA_SUPPORT
#define NUM_STA_MAC_REG_PARMS (sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
#endif // CONFIG_STA_SUPPORT //
// New 8k byte firmware size for RT3071/RT3072
......@@ -1277,9 +1272,6 @@ VOID NICReadEEPROMParameters(
NicConfig2.word = pAd->EEPROMDefaultValue[1];
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
NicConfig2.word = 0;
......@@ -1293,7 +1285,6 @@ VOID NICReadEEPROMParameters(
NicConfig2.word &= 0x00ff;
}
}
#endif // CONFIG_STA_SUPPORT //
if (NicConfig2.field.DynamicTxAgcControl == 1)
pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
......@@ -1504,10 +1495,8 @@ VOID NICReadEEPROMParameters(
VOID NICInitAsicFromEEPROM(
IN PRTMP_ADAPTER pAd)
{
#ifdef CONFIG_STA_SUPPORT
UINT32 data = 0;
UCHAR BBPR1 = 0;
#endif // CONFIG_STA_SUPPORT //
USHORT i;
EEPROM_ANTENNA_STRUC Antenna;
EEPROM_NIC_CONFIG2_STRUC NicConfig2;
......@@ -1553,7 +1542,6 @@ VOID NICInitAsicFromEEPROM(
pAd->LedIndicatorStregth = 0xFF;
RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, before link up
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// Read Hardware controlled Radio state enable bit
......@@ -1586,7 +1574,6 @@ VOID NICInitAsicFromEEPROM(
AsicCheckCommanOk(pAd, PowerWakeCID);
}
}
#endif // CONFIG_STA_SUPPORT //
// Turn off patching for cardbus controller
if (NicConfig2.field.CardbusAcceleration == 1)
......@@ -1619,7 +1606,6 @@ VOID NICInitAsicFromEEPROM(
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// Handle the difference when 1T
......@@ -1632,7 +1618,7 @@ VOID NICInitAsicFromEEPROM(
DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
}
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
}
......@@ -1880,7 +1866,6 @@ NDIS_STATUS NICInitializeAsic(
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
......@@ -1888,8 +1873,6 @@ NDIS_STATUS NICInitializeAsic(
RTMP_IO_WRITE32(pAd, STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
}
}
#endif // CONFIG_STA_SUPPORT //
//
// Before program BBP, we need to wait BBP/RF get wake up.
......@@ -1953,7 +1936,6 @@ NDIS_STATUS NICInitializeAsic(
// Add radio off control
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (pAd->StaCfg.bRadio == FALSE)
......@@ -1963,7 +1945,6 @@ NDIS_STATUS NICInitializeAsic(
DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
}
}
#endif // CONFIG_STA_SUPPORT //
// Clear raw counters
RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
......@@ -2002,14 +1983,12 @@ NDIS_STATUS NICInitializeAsic(
}
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
if ((pAd->MACVersion&0xffff) != 0x0101)
RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
}
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
return NDIS_STATUS_SUCCESS;
......@@ -3006,7 +2985,6 @@ VOID UserCfgInit(
//
// part II. intialize STA specific configuration
//
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
......@@ -3045,7 +3023,6 @@ VOID UserCfgInit(
pAd->StaCfg.bAutoTxRateSwitch = TRUE;
pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
}
#endif // CONFIG_STA_SUPPORT //
// global variables mXXXX used in MAC protocol state machines
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
......@@ -3056,7 +3033,6 @@ VOID UserCfgInit(
pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; // default PHY mode
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); // CCK use LONG preamble
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// user desired power mode
......@@ -3101,7 +3077,6 @@ VOID UserCfgInit(
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
// Default for extra information is not valid
pAd->ExtraInfo = EXTRA_INFO_CLEAR;
......
drivers/staging/rt2860/common/rtmp_wep.c
View file @ 6a28a69a
......@@ -144,14 +144,12 @@ VOID RTMPInitWepEngine(
pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32; //Init crc32.
#ifdef CONFIG_STA_SUPPORT
if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
{
ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen); //INIT SBOX, KEYLEN+3(IV)
NdisMoveMemory(pDest, pKey, 3); //Append Init Vector
}
else
#endif // CONFIG_STA_SUPPORT //
{
NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
......
drivers/staging/rt2860/common/spectrum.c
View file @ 6a28a69a
......@@ -1454,10 +1454,8 @@ static VOID PeerChSwAnnAction(
{
CH_SW_ANN_INFO ChSwAnnInfo;
PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
#ifdef CONFIG_STA_SUPPORT
UCHAR index = 0, Channel = 0, NewChannel = 0;
ULONG Bssidx = 0;
#endif // CONFIG_STA_SUPPORT //
NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
......@@ -1466,8 +1464,6 @@ static VOID PeerChSwAnnAction(
return;
}
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
{
Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
......@@ -1514,7 +1510,6 @@ static VOID PeerChSwAnnAction(
}
}
}
#endif // CONFIG_STA_SUPPORT //
return;
}
......
drivers/staging/rt2860/mlme.h
View file @ 6a28a69a
......@@ -74,12 +74,9 @@
#define FAST_ACTIVE_SCAN_TIME 30 // Active scan waiting for probe response time
#define CW_MIN_IN_BITS 4 // actual CwMin = 2^CW_MIN_IN_BITS - 1
#ifdef CONFIG_STA_SUPPORT
#ifndef CONFIG_AP_SUPPORT
#define CW_MAX_IN_BITS 10 // actual CwMax = 2^CW_MAX_IN_BITS - 1
#endif
#endif // CONFIG_STA_SUPPORT //
// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
// SHould not refer to this constant anymore
......@@ -111,10 +108,7 @@
#define BSS_NOT_FOUND 0xFFFFFFFF
#ifdef CONFIG_STA_SUPPORT
#define MAX_LEN_OF_MLME_QUEUE 40 //10
#endif // CONFIG_STA_SUPPORT //
#define SCAN_PASSIVE 18 // scan with no probe request, only wait beacon and probe response
#define SCAN_ACTIVE 19 // scan with probe request, and wait beacon and probe response
......@@ -842,13 +836,10 @@ typedef struct {
UCHAR EdcaUpdateCount;
} QOS_CAPABILITY_PARM, *PQOS_CAPABILITY_PARM;
#ifdef CONFIG_STA_SUPPORT
typedef struct {
UCHAR IELen;
UCHAR IE[MAX_CUSTOM_LEN];
} WPA_IE_;
#endif // CONFIG_STA_SUPPORT //
typedef struct {
UCHAR Bssid[MAC_ADDR_LEN];
......@@ -908,10 +899,8 @@ typedef struct {
EDCA_PARM EdcaParm;
QOS_CAPABILITY_PARM QosCapability;
QBSS_LOAD_PARM QbssLoad;
#ifdef CONFIG_STA_SUPPORT
WPA_IE_ WpaIE;
WPA_IE_ RsnIE;
#endif // CONFIG_STA_SUPPORT //
} BSS_ENTRY, *PBSS_ENTRY;
typedef struct {
......
drivers/staging/rt2860/oid.h
View file @ 6a28a69a
......@@ -383,9 +383,6 @@ typedef struct PACKED _RADIUS_CONF
RADIUS_KEY_INFO RadiusInfo[8/*MAX_MBSSID_NUM*/];
} RADIUS_CONF, *PRADIUS_CONF;
#ifdef CONFIG_STA_SUPPORT
// Key mapping keys require a BSSID
typedef struct _NDIS_802_11_KEY
{
......@@ -396,7 +393,6 @@ typedef struct _NDIS_802_11_KEY
NDIS_802_11_KEY_RSC KeyRSC;
UCHAR KeyMaterial[1]; // variable length depending on above field
} NDIS_802_11_KEY, *PNDIS_802_11_KEY;
#endif // CONFIG_STA_SUPPORT //
typedef struct _NDIS_802_11_REMOVE_KEY
{
......@@ -600,7 +596,6 @@ typedef enum _NDIS_802_11_MEDIA_STREAM_MODE
// PMKID Structures
typedef UCHAR NDIS_802_11_PMKID_VALUE[16];
#ifdef CONFIG_STA_SUPPORT
typedef struct _BSSID_INFO
{
NDIS_802_11_MAC_ADDRESS BSSID;
......@@ -613,8 +608,6 @@ typedef struct _NDIS_802_11_PMKID
UINT BSSIDInfoCount;
BSSID_INFO BSSIDInfo[1];
} NDIS_802_11_PMKID, *PNDIS_802_11_PMKID;
#endif // CONFIG_STA_SUPPORT //
typedef struct _NDIS_802_11_AUTHENTICATION_ENCRYPTION
{
......@@ -638,7 +631,6 @@ typedef struct _NDIS_802_11_CAPABILITY
#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
#endif
#ifdef CONFIG_STA_SUPPORT
#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
#ifdef DBG
......@@ -665,8 +657,6 @@ enum {
SHOW_CFG_VALUE = 20,
};
#endif // CONFIG_STA_SUPPORT //
#define OID_802_11_BUILD_CHANNEL_EX 0x0714
#define OID_802_11_GET_CH_LIST 0x0715
#define OID_802_11_GET_COUNTRY_CODE 0x0716
......@@ -883,7 +873,6 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
} RT_LLTD_ASSOICATION_TABLE, *PRT_LLTD_ASSOICATION_TABLE;
#endif // LLTD_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
#define RT_ASSOC_EVENT_FLAG 0x0101
......@@ -896,18 +885,15 @@ typedef struct _RT_LLTD_ASSOICATION_TABLE {
#define RT_INTERFACE_UP 0x0108
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
#define MAX_CUSTOM_LEN 128
#ifdef CONFIG_STA_SUPPORT
typedef enum _RT_802_11_D_CLIENT_MODE
{
Rt802_11_D_None,
Rt802_11_D_Flexible,
Rt802_11_D_Strict,
} RT_802_11_D_CLIENT_MODE, *PRT_802_11_D_CLIENT_MODE;
#endif // CONFIG_STA_SUPPORT //
typedef struct _RT_CHANNEL_LIST_INFO
{
......
drivers/staging/rt2860/rt_config.h
View file @ 6a28a69a
......@@ -64,15 +64,12 @@
#include "igmp_snoop.h"
#endif // IGMP_SNOOP_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT
#ifndef WPA_SUPPLICANT_SUPPORT
#error "Build for being controlled by NetworkManager or wext, please set HAS_WPA_SUPPLICANT=y and HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y"
#endif // WPA_SUPPLICANT_SUPPORT //
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // CONFIG_STA_SUPPORT //
#ifdef IKANOS_VX_1X0
#include "vr_ikans.h"
#endif // IKANOS_VX_1X0 //
......
drivers/staging/rt2860/rt_linux.c
View file @ 6a28a69a
......@@ -34,8 +34,6 @@ BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
BUILD_TIMER_FUNCTION(APSDPeriodicExec);
BUILD_TIMER_FUNCTION(AsicRfTuningExec);
#ifdef CONFIG_STA_SUPPORT
BUILD_TIMER_FUNCTION(BeaconTimeout);
BUILD_TIMER_FUNCTION(ScanTimeout);
BUILD_TIMER_FUNCTION(AuthTimeout);
......@@ -47,7 +45,6 @@ BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
BUILD_TIMER_FUNCTION(PsPollWakeExec);
BUILD_TIMER_FUNCTION(RadioOnExec);
#endif // CONFIG_STA_SUPPORT //
// for wireless system event message
char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
......@@ -489,12 +486,10 @@ PNET_DEV get_netdev_from_bssid(
{
PNET_DEV dev_p = NULL;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
dev_p = pAd->net_dev;
}
#endif // CONFIG_STA_SUPPORT //
ASSERT(dev_p);
return dev_p; /* return one of MBSS */
......@@ -650,10 +645,8 @@ void wlan_802_11_to_802_3_packet(
//
//
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
NdisMoveMemory(skb_push(pOSPkt, LENGTH_802_3), pHeader802_3, LENGTH_802_3);
#endif // CONFIG_STA_SUPPORT //
}
......@@ -818,8 +811,6 @@ VOID RTMPSendWirelessEvent(
#endif /* WIRELESS_EXT >= 15 */
}
#ifdef CONFIG_STA_SUPPORT
void send_monitor_packets(
IN PRTMP_ADAPTER pAd,
IN RX_BLK *pRxBlk)
......@@ -990,8 +981,6 @@ void send_monitor_packets(
return;
}
#endif // CONFIG_STA_SUPPORT //
void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify)
{
......
drivers/staging/rt2860/rt_linux.h
View file @ 6a28a69a
......@@ -87,12 +87,10 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
// add by kathy
#ifdef CONFIG_STA_SUPPORT
#define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat"
#define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin"
#define STA_NIC_DEVICE_NAME "RT2860STA"
#define STA_DRIVER_VERSION "1.8.1.1"
#endif // CONFIG_STA_SUPPORT //
#ifndef PCI_DEVICE
#define PCI_DEVICE(vend,dev) \
......@@ -138,17 +136,12 @@ typedef int (*HARD_START_XMIT_FUNC)(struct sk_buff *skb, struct net_device *net_
#define MIN_NET_DEVICE_FOR_WDS 0x10 //0x40,0x50,0x60,0x70
#define MIN_NET_DEVICE_FOR_APCLI 0x20
#define MIN_NET_DEVICE_FOR_MESH 0x30
#ifdef CONFIG_STA_SUPPORT
#define MIN_NET_DEVICE_FOR_DLS 0x40
#endif // CONFIG_STA_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
#define NDIS_PACKET_TYPE_DIRECTED 0
#define NDIS_PACKET_TYPE_MULTICAST 1
#define NDIS_PACKET_TYPE_BROADCAST 2
#define NDIS_PACKET_TYPE_ALL_MULTICAST 3
#endif // CONFIG_STA_SUPPORT //
typedef struct pid * THREAD_PID;
#define THREAD_PID_INIT_VALUE NULL
......@@ -541,8 +534,6 @@ DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
#ifdef CONFIG_STA_SUPPORT
DECLARE_TIMER_FUNCTION(BeaconTimeout);
DECLARE_TIMER_FUNCTION(ScanTimeout);
DECLARE_TIMER_FUNCTION(AuthTimeout);
......@@ -554,7 +545,6 @@ DECLARE_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
DECLARE_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
DECLARE_TIMER_FUNCTION(PsPollWakeExec);
DECLARE_TIMER_FUNCTION(RadioOnExec);
#endif // CONFIG_STA_SUPPORT //
void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
......
drivers/staging/rt2860/rt_main_dev.c
View file @ 6a28a69a
......@@ -72,9 +72,7 @@ INT rt28xx_send_packets(IN struct sk_buff *skb_p, IN struct net_device *net_dev)
static void CfgInitHook(PRTMP_ADAPTER pAd);
#ifdef CONFIG_STA_SUPPORT
extern const struct iw_handler_def rt28xx_iw_handler_def;
#endif // CONFIG_STA_SUPPORT //
#if WIRELESS_EXT >= 12
// This function will be called when query /proc
......@@ -199,7 +197,6 @@ int rt28xx_close(IN PNET_DEV dev)
if (pAd == NULL)
return 0; // close ok
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If dirver doesn't wake up firmware here,
......@@ -259,7 +256,6 @@ int rt28xx_close(IN PNET_DEV dev)
MlmeRadioOff(pAd);
pAd->bPCIclkOff = FALSE;
}
#endif // CONFIG_STA_SUPPORT //
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
......@@ -278,13 +274,10 @@ int rt28xx_close(IN PNET_DEV dev)
// Close kernel threads or tasklets
kill_thread_task(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
MacTableReset(pAd);
}
#endif // CONFIG_STA_SUPPORT //
MeasureReqTabExit(pAd);
......@@ -404,10 +397,8 @@ static int rt28xx_init(IN struct net_device *net_dev)
CfgInitHook(pAd);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
NdisAllocateSpinLock(&pAd->MacTabLock);
#endif // CONFIG_STA_SUPPORT //
MeasureReqTabInit(pAd);
TpcReqTabInit(pAd);
......@@ -585,13 +576,11 @@ int rt28xx_open(IN PNET_DEV dev)
if (rt28xx_init(net_dev) == FALSE)
goto err;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
NdisZeroMemory(pAd->StaCfg.dev_name, 16);
NdisMoveMemory(pAd->StaCfg.dev_name, net_dev->name, strlen(net_dev->name));
}
#endif // CONFIG_STA_SUPPORT //
// Set up the Mac address
NdisMoveMemory(net_dev->dev_addr, (void *) pAd->CurrentAddress, 6);
......@@ -601,7 +590,6 @@ int rt28xx_open(IN PNET_DEV dev)
// Various AP function init
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef WPA_SUPPLICANT_SUPPORT
......@@ -617,7 +605,6 @@ int rt28xx_open(IN PNET_DEV dev)
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
// Enable Interrupt
RT28XX_IRQ_ENABLE(pAd);
......@@ -632,10 +619,8 @@ int rt28xx_open(IN PNET_DEV dev)
printk("0x1300 = %08x\n", reg);
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMPInitPCIeLinkCtrlValue(pAd);
#endif // CONFIG_STA_SUPPORT //
return (retval);
......@@ -669,14 +654,12 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
//ether_setup(dev);
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT >= 12
if (pAd->OpMode == OPMODE_STA)
{
dev->wireless_handlers = &rt28xx_iw_handler_def;
}
#endif //WIRELESS_EXT >= 12
#endif // CONFIG_STA_SUPPORT //
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
......@@ -740,9 +723,7 @@ INT __devinit rt28xx_probe(
struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
#ifdef CONFIG_STA_SUPPORT
DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
#endif // CONFIG_STA_SUPPORT //
net_dev = alloc_etherdev(sizeof(PRTMP_ADAPTER));
if (net_dev == NULL)
......@@ -774,17 +755,13 @@ INT __devinit rt28xx_probe(
RT28XXNetDevInit(_dev_p, net_dev, pAd);
#ifdef CONFIG_STA_SUPPORT
pAd->StaCfg.OriDevType = net_dev->type;
#endif // CONFIG_STA_SUPPORT //
// Post config
if (RT28XXProbePostConfig(_dev_p, pAd, 0) == FALSE)
goto err_out_unmap;
#ifdef CONFIG_STA_SUPPORT
pAd->OpMode = OPMODE_STA;
#endif // CONFIG_STA_SUPPORT //
// sample move
if (rt_ieee80211_if_setup(net_dev, pAd) != NDIS_STATUS_SUCCESS)
......@@ -841,7 +818,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
int status = 0;
PNDIS_PACKET pPacket = (PNDIS_PACKET) skb;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// Drop send request since we are in monitor mode
......@@ -851,7 +827,6 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
goto done;
}
}
#endif // CONFIG_STA_SUPPORT //
// EapolStart size is 18
if (skb->len < 14)
......@@ -869,17 +844,12 @@ int rt28xx_packet_xmit(struct sk_buff *skb)
}
#endif
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
STASendPackets((NDIS_HANDLE)pAd, (PPNDIS_PACKET) &pPacket, 1);
}
#endif // CONFIG_STA_SUPPORT //
status = 0;
done:
......@@ -947,10 +917,8 @@ struct iw_statistics *rt28xx_get_wireless_stats(
if(pAd->iw_stats.qual.qual > 100)
pAd->iw_stats.qual.qual = 100;
#ifdef CONFIG_STA_SUPPORT
if (pAd->OpMode == OPMODE_STA)
pAd->iw_stats.qual.level = RTMPMaxRssi(pAd, pAd->StaCfg.RssiSample.LastRssi0, pAd->StaCfg.RssiSample.LastRssi1, pAd->StaCfg.RssiSample.LastRssi2);
#endif // CONFIG_STA_SUPPORT //
pAd->iw_stats.qual.noise = pAd->BbpWriteLatch[66]; // noise level (dBm)
......@@ -1002,13 +970,10 @@ INT rt28xx_ioctl(
return -ENETDOWN;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
ret = rt28xx_sta_ioctl(net_dev, rq, cmd);
}
#endif // CONFIG_STA_SUPPORT //
return ret;
}
......
drivers/staging/rt2860/rt_profile.c
View file @ 6a28a69a
......@@ -756,8 +756,6 @@ static void rtmp_read_key_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, c
//DefaultKeyID
if(RTMPGetKeyParameter("DefaultKeyID", tmpbuf, 25, buffer))
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
KeyIdx = simple_strtol(tmpbuf, 0, 10);
......@@ -768,7 +766,6 @@ static void rtmp_read_key_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, c
DBGPRINT(RT_DEBUG_TRACE, ("DefaultKeyID(0~3)=%d\n", pAd->StaCfg.DefaultKeyId));
}
#endif // CONFIG_STA_SUPPORT //
}
......@@ -783,7 +780,6 @@ static void rtmp_read_key_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, c
KeyType[i] = simple_strtol(macptr, 0, 10);
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
sprintf(tok_str, "Key%dStr", idx + 1);
......@@ -792,13 +788,10 @@ static void rtmp_read_key_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, c
rtmp_parse_key_buffer_from_file(pAd, tmpbuf, KeyType[BSS0], BSS0, idx);
}
}
#endif // CONFIG_STA_SUPPORT //
}
}
}
#ifdef CONFIG_STA_SUPPORT
static void rtmp_read_sta_wmm_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbuf, char *buffer)
{
PUCHAR macptr;
......@@ -865,8 +858,6 @@ static void rtmp_read_sta_wmm_parms_from_file(IN PRTMP_ADAPTER pAd, char *tmpbu
}
}
#endif // CONFIG_STA_SUPPORT //
NDIS_STATUS RTMPReadParametersHook(
IN PRTMP_ADAPTER pAd)
......@@ -879,10 +870,7 @@ NDIS_STATUS RTMPReadParametersHook(
CHAR *tmpbuf;
ULONG RtsThresh;
ULONG FragThresh;
#ifdef CONFIG_STA_SUPPORT
UCHAR keyMaterial[40];
#endif // CONFIG_STA_SUPPORT //
PUCHAR macptr;
INT i = 0;
......@@ -898,10 +886,8 @@ NDIS_STATUS RTMPReadParametersHook(
return NDIS_STATUS_FAILURE;
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
src = STA_PROFILE_PATH;
#endif // CONFIG_STA_SUPPORT //
// Save uid and gid used for filesystem access.
// Set user and group to 0 (root)
......@@ -975,8 +961,6 @@ NDIS_STATUS RTMPReadParametersHook(
pAd->CommonCfg.CountryCode[2] = ' ';
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
//SSID
......@@ -997,9 +981,7 @@ NDIS_STATUS RTMPReadParametersHook(
}
}
}
#endif // CONFIG_STA_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
//NetworkType
......@@ -1015,7 +997,7 @@ NDIS_STATUS RTMPReadParametersHook(
DBGPRINT(RT_DEBUG_TRACE, ("%s::(NetworkType=%d)\n", __func__, pAd->StaCfg.BssType));
}
}
#endif // CONFIG_STA_SUPPORT //
//Channel
if(RTMPGetKeyParameter("Channel", tmpbuf, 10, buffer))
{
......@@ -1055,10 +1037,10 @@ NDIS_STATUS RTMPReadParametersHook(
if(RTMPGetKeyParameter("TxPower", tmpbuf, 10, buffer))
{
pAd->CommonCfg.TxPowerPercentage = (ULONG) simple_strtol(tmpbuf, 0, 10);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
pAd->CommonCfg.TxPowerDefault = pAd->CommonCfg.TxPowerPercentage;
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("TxPower=%ld\n", pAd->CommonCfg.TxPowerPercentage));
}
//BGProtection
......@@ -1175,11 +1157,8 @@ NDIS_STATUS RTMPReadParametersHook(
#endif // AGGREGATION_SUPPORT //
// WmmCapable
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
rtmp_read_sta_wmm_parms_from_file(pAd, tmpbuf, buffer);
#endif // CONFIG_STA_SUPPORT //
//ShortSlot
if(RTMPGetKeyParameter("ShortSlot", tmpbuf, 10, buffer))
......@@ -1282,7 +1261,6 @@ NDIS_STATUS RTMPReadParametersHook(
//AuthMode
if(RTMPGetKeyParameter("AuthMode", tmpbuf, 128, buffer))
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if ((strcmp(tmpbuf, "WEPAUTO") == 0) || (strcmp(tmpbuf, "wepauto") == 0))
......@@ -1308,13 +1286,10 @@ NDIS_STATUS RTMPReadParametersHook(
DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
}
#endif // CONFIG_STA_SUPPORT //
}
//EncrypType
if(RTMPGetKeyParameter("EncrypType", tmpbuf, 128, buffer))
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if ((strcmp(tmpbuf, "WEP") == 0) || (strcmp(tmpbuf, "wep") == 0))
......@@ -1334,12 +1309,8 @@ NDIS_STATUS RTMPReadParametersHook(
DBGPRINT(RT_DEBUG_TRACE, ("%s::(EncrypType=%d)\n", __func__, pAd->StaCfg.WepStatus));
}
#endif // CONFIG_STA_SUPPORT //
}
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if(RTMPGetCriticalParameter("WPAPSK", tmpbuf, 512, buffer))
......@@ -1389,7 +1360,6 @@ NDIS_STATUS RTMPReadParametersHook(
}
}
}
#endif // CONFIG_STA_SUPPORT //
//DefaultKeyID, KeyType, KeyStr
rtmp_read_key_parms_from_file(pAd, tmpbuf, buffer);
......@@ -1398,7 +1368,6 @@ NDIS_STATUS RTMPReadParametersHook(
HTParametersHook(pAd, tmpbuf, buffer);
#endif // DOT11_N_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
//PSMode
......@@ -1485,8 +1454,6 @@ NDIS_STATUS RTMPReadParametersHook(
DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
}
}
#endif // CONFIG_STA_SUPPORT //
}
}
else
......@@ -1755,7 +1722,6 @@ static void HTParametersHook(
{
UCHAR fix_tx_mode;
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
fix_tx_mode = FIXED_TXMODE_HT;
......@@ -1788,7 +1754,6 @@ static void HTParametersHook(
DBGPRINT(RT_DEBUG_TRACE, ("Fixed Tx Mode = %d\n", fix_tx_mode));
}
#endif // CONFIG_STA_SUPPORT //
}
......@@ -1833,8 +1798,6 @@ static void HTParametersHook(
// MSC
if (RTMPGetKeyParameter("HT_MCS", pValueStr, 50, pInput))
{
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
Value = simple_strtol(pValueStr, 0, 10);
......@@ -1852,7 +1815,6 @@ static void HTParametersHook(
DBGPRINT(RT_DEBUG_TRACE, ("HT: MCS = AUTO\n"));
}
}
#endif // CONFIG_STA_SUPPORT //
}
// STBC
......
drivers/staging/rt2860/rtmp.h
View file @ 6a28a69a
This diff is collapsed.
drivers/staging/rt2860/rtmp_def.h
View file @ 6a28a69a
......@@ -1363,7 +1363,6 @@
// End - WIRELESS EVENTS definition
#ifdef CONFIG_STA_SUPPORT
// definition for DLS, kathy
#define MAX_NUM_OF_INIT_DLS_ENTRY 1
#define MAX_NUM_OF_DLS_ENTRY MAX_NUMBER_OF_DLS_ENTRY
......@@ -1381,7 +1380,6 @@
/* Maximum size of the ESSID and pAd->nickname strings */
#define IW_ESSID_MAX_SIZE 32
#endif
#endif // CONFIG_STA_SUPPORT //
#ifdef MCAST_RATE_SPECIFIC
#define MCAST_DISABLE 0
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7