Commit 6a81c26f authored by Viresh Kumar's avatar Viresh Kumar Committed by Linus Torvalds

net/stmmac: remove conditional compilation of clk code

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in
clk.h, there is no need to have clk code enclosed in #ifdef
CONFIG_HAVE_CLK, #endif macros.

This also fixes error paths of probe(), as a goto is required in this
patch.
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: viresh kumar <viresh.linux@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 2b1463dd
......@@ -82,9 +82,7 @@ struct stmmac_priv {
struct stmmac_counters mmc;
struct dma_features dma_cap;
int hw_cap_support;
#ifdef CONFIG_HAVE_CLK
struct clk *stmmac_clk;
#endif
int clk_csr;
int synopsys_id;
struct timer_list eee_ctrl_timer;
......@@ -113,46 +111,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
void stmmac_disable_eee_mode(struct stmmac_priv *priv);
bool stmmac_eee_init(struct stmmac_priv *priv);
#ifdef CONFIG_HAVE_CLK
static inline int stmmac_clk_enable(struct stmmac_priv *priv)
{
if (!IS_ERR(priv->stmmac_clk))
return clk_prepare_enable(priv->stmmac_clk);
return 0;
}
static inline void stmmac_clk_disable(struct stmmac_priv *priv)
{
if (IS_ERR(priv->stmmac_clk))
return;
clk_disable_unprepare(priv->stmmac_clk);
}
static inline int stmmac_clk_get(struct stmmac_priv *priv)
{
priv->stmmac_clk = clk_get(priv->device, NULL);
if (IS_ERR(priv->stmmac_clk))
return PTR_ERR(priv->stmmac_clk);
return 0;
}
#else
static inline int stmmac_clk_enable(struct stmmac_priv *priv)
{
return 0;
}
static inline void stmmac_clk_disable(struct stmmac_priv *priv)
{
}
static inline int stmmac_clk_get(struct stmmac_priv *priv)
{
return 0;
}
#endif /* CONFIG_HAVE_CLK */
#ifdef CONFIG_STMMAC_PLATFORM
extern struct platform_driver stmmac_pltfr_driver;
static inline int stmmac_register_platform(void)
......
......@@ -28,6 +28,7 @@
https://bugzilla.stlinux.com/
*******************************************************************************/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
......@@ -173,12 +174,8 @@ static void stmmac_verify_args(void)
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
{
#ifdef CONFIG_HAVE_CLK
u32 clk_rate;
if (IS_ERR(priv->stmmac_clk))
return;
clk_rate = clk_get_rate(priv->stmmac_clk);
/* Platform provided default clk_csr would be assumed valid
......@@ -200,7 +197,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
* we can not estimate the proper divider as it is not known
* the frequency of clk_csr_i. So we do not change the default
* divider. */
#endif
}
#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
......@@ -1070,7 +1066,7 @@ static int stmmac_open(struct net_device *dev)
} else
priv->tm->enable = 1;
#endif
stmmac_clk_enable(priv);
clk_enable(priv->stmmac_clk);
stmmac_check_ether_addr(priv);
......@@ -1192,7 +1188,7 @@ static int stmmac_open(struct net_device *dev)
if (priv->phydev)
phy_disconnect(priv->phydev);
stmmac_clk_disable(priv);
clk_disable(priv->stmmac_clk);
return ret;
}
......@@ -1250,7 +1246,7 @@ static int stmmac_release(struct net_device *dev)
#ifdef CONFIG_STMMAC_DEBUG_FS
stmmac_exit_fs();
#endif
stmmac_clk_disable(priv);
clk_disable(priv->stmmac_clk);
return 0;
}
......@@ -2078,11 +2074,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
ret = register_netdev(ndev);
if (ret) {
pr_err("%s: ERROR %i registering the device\n", __func__, ret);
goto error;
goto error_netdev_register;
}
if (stmmac_clk_get(priv))
priv->stmmac_clk = clk_get(priv->device, NULL);
if (IS_ERR(priv->stmmac_clk)) {
pr_warning("%s: warning: cannot get CSR clock\n", __func__);
goto error_clk_get;
}
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
......@@ -2100,15 +2099,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
if (ret < 0) {
pr_debug("%s: MDIO bus (id: %d) registration failed",
__func__, priv->plat->bus_id);
goto error;
goto error_mdio_register;
}
return priv;
error:
netif_napi_del(&priv->napi);
error_mdio_register:
clk_put(priv->stmmac_clk);
error_clk_get:
unregister_netdev(ndev);
error_netdev_register:
netif_napi_del(&priv->napi);
free_netdev(ndev);
return NULL;
......@@ -2177,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev)
else {
stmmac_set_mac(priv->ioaddr, false);
/* Disable clock in case of PWM is off */
stmmac_clk_disable(priv);
clk_disable(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
......@@ -2202,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev)
priv->hw->mac->pmt(priv->ioaddr, 0);
else
/* enable the clk prevously disabled */
stmmac_clk_enable(priv);
clk_enable(priv->stmmac_clk);
netif_device_attach(ndev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment