Commit 6a9612e2 authored by Bjørn Mork's avatar Bjørn Mork Committed by David S. Miller

net: cdc_ncm: remove ncm_parm field

Moving the call to cdc_ncm_setup() after the endpoint
setup removes the last remaining reference to ncm_parm
outside cdc_ncm_setup.

Collecting all the ncm_parm based calculations in
cdc_ncm_setup improves readability.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f3028c52
......@@ -83,6 +83,7 @@ cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
static u8 cdc_ncm_setup(struct usbnet *dev)
{
struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
struct usb_cdc_ncm_ntb_parameters ncm_parm;
u32 val;
u8 flags;
u8 iface_no;
......@@ -97,22 +98,22 @@ static u8 cdc_ncm_setup(struct usbnet *dev)
err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS,
USB_TYPE_CLASS | USB_DIR_IN
|USB_RECIP_INTERFACE,
0, iface_no, &ctx->ncm_parm,
sizeof(ctx->ncm_parm));
0, iface_no, &ncm_parm,
sizeof(ncm_parm));
if (err < 0) {
pr_debug("failed GET_NTB_PARAMETERS\n");
return 1;
}
/* read correct set of parameters according to device mode */
ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize);
ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize);
ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
ctx->rx_max = le32_to_cpu(ncm_parm.dwNtbInMaxSize);
ctx->tx_max = le32_to_cpu(ncm_parm.dwNtbOutMaxSize);
ctx->tx_remainder = le16_to_cpu(ncm_parm.wNdpOutPayloadRemainder);
ctx->tx_modulus = le16_to_cpu(ncm_parm.wNdpOutDivisor);
ctx->tx_ndp_modulus = le16_to_cpu(ncm_parm.wNdpOutAlignment);
/* devices prior to NCM Errata shall set this field to zero */
ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams);
ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported);
ctx->tx_max_datagrams = le16_to_cpu(ncm_parm.wNtbOutMaxDatagrams);
ntb_fmt_supported = le16_to_cpu(ncm_parm.bmNtbFormatsSupported);
eth_hlen = ETH_HLEN;
min_dgram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
......@@ -153,7 +154,7 @@ static u8 cdc_ncm_setup(struct usbnet *dev)
}
/* inform device about NTB input size changes */
if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
if (ctx->rx_max != le32_to_cpu(ncm_parm.dwNtbInMaxSize)) {
__le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE,
......@@ -171,6 +172,14 @@ static u8 cdc_ncm_setup(struct usbnet *dev)
pr_debug("Using default maximum transmit length=%d\n",
CDC_NCM_NTB_MAX_SIZE_TX);
ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;
/* Adding a pad byte here simplifies the handling in
* cdc_ncm_fill_tx_frame, by making tx_max always
* represent the real skb max size.
*/
if (ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
ctx->tx_max++;
}
/*
......@@ -473,10 +482,6 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
if (temp)
goto error2;
/* initialize data interface */
if (cdc_ncm_setup(dev))
goto error2;
/* configure data interface */
temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
if (temp)
......@@ -487,6 +492,10 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
if (!dev->in || !dev->out || !dev->status)
goto error2;
/* initialize data interface */
if (cdc_ncm_setup(dev))
goto error2;
dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
usb_set_intfdata(ctx->data, dev);
......@@ -501,15 +510,6 @@ int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_
dev->rx_urb_size = ctx->rx_max;
/* cdc_ncm_setup will override dwNtbOutMaxSize if it is
* outside the sane range. Adding a pad byte here if necessary
* simplifies the handling in cdc_ncm_fill_tx_frame, making
* tx_max always represent the real skb max size.
*/
if (ctx->tx_max != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
ctx->tx_max % usb_maxpacket(dev->udev, dev->out, 1) == 0)
ctx->tx_max++;
return 0;
error2:
......
......@@ -88,7 +88,6 @@
#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
struct cdc_ncm_ctx {
struct usb_cdc_ncm_ntb_parameters ncm_parm;
struct hrtimer tx_timer;
struct tasklet_struct bh;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment