Commit 6a974038 authored by David S. Miller's avatar David S. Miller

Merge branch 'r8152'

Hayes Wang says:

====================
r8152: use mutex for hw settings

v2:
Make sure the autoresume wouldn't occur inside the mutex, otherwise
the dead lock would happen. For the purpose, adjust some code about
autosuspend/autoresume.

v1:
Use mutex to avoid that the serial hw settings would be interrupted
by other settings. Although there is no problem now, it makes the
driver more safe.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents de3f0d0e b5403273
......@@ -26,7 +26,7 @@
#include <linux/mdio.h>
/* Version Information */
#define DRIVER_VERSION "v1.06.1 (2014/10/01)"
#define DRIVER_VERSION "v1.07.0 (2014/10/09)"
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
......@@ -566,6 +566,7 @@ struct r8152 {
spinlock_t rx_lock, tx_lock;
struct delayed_work schedule;
struct mii_if_info mii;
struct mutex control; /* use for hw setting */
struct rtl_ops {
void (*init)(struct r8152 *);
......@@ -942,15 +943,8 @@ static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
if (phy_id != R8152_PHY_ID)
return -EINVAL;
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out;
ret = r8152_mdio_read(tp, reg);
usb_autopm_put_interface(tp->intf);
out:
return ret;
}
......@@ -965,12 +959,7 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
if (phy_id != R8152_PHY_ID)
return;
if (usb_autopm_get_interface(tp->intf) < 0)
return;
r8152_mdio_write(tp, reg, val);
usb_autopm_put_interface(tp->intf);
}
static int
......@@ -989,12 +978,16 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
if (ret < 0)
goto out1;
mutex_lock(&tp->control);
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out1:
return ret;
......@@ -2145,6 +2138,13 @@ static int rtl8152_set_features(struct net_device *dev,
{
netdev_features_t changed = features ^ dev->features;
struct r8152 *tp = netdev_priv(dev);
int ret;
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out;
mutex_lock(&tp->control);
if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
if (features & NETIF_F_HW_VLAN_CTAG_RX)
......@@ -2153,7 +2153,12 @@ static int rtl8152_set_features(struct net_device *dev,
rtl_rx_vlan_en(tp, false);
}
return 0;
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out:
return ret;
}
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
......@@ -2851,6 +2856,11 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(RTL8152_UNPLUG, &tp->flags))
goto out1;
if (!mutex_trylock(&tp->control)) {
schedule_delayed_work(&tp->schedule, 0);
goto out1;
}
if (test_bit(RTL8152_LINK_CHG, &tp->flags))
set_carrier(tp);
......@@ -2866,6 +2876,8 @@ static void rtl_work_func_t(struct work_struct *work)
if (test_bit(PHY_RESET, &tp->flags))
rtl_phy_reset(tp);
mutex_unlock(&tp->control);
out1:
usb_autopm_put_interface(tp->intf);
}
......@@ -2885,6 +2897,8 @@ static int rtl8152_open(struct net_device *netdev)
goto out;
}
mutex_lock(&tp->control);
/* The WORK_ENABLE may be set when autoresume occurs */
if (test_bit(WORK_ENABLE, &tp->flags)) {
clear_bit(WORK_ENABLE, &tp->flags);
......@@ -2913,6 +2927,8 @@ static int rtl8152_open(struct net_device *netdev)
free_all_mem(tp);
}
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out:
......@@ -2933,6 +2949,8 @@ static int rtl8152_close(struct net_device *netdev)
if (res < 0) {
rtl_drop_queued_tx(tp);
} else {
mutex_lock(&tp->control);
/* The autosuspend may have been enabled and wouldn't
* be disable when autoresume occurs, because the
* netif_running() would be false.
......@@ -2945,6 +2963,9 @@ static int rtl8152_close(struct net_device *netdev)
tasklet_disable(&tp->tl);
tp->rtl_ops.down(tp);
tasklet_enable(&tp->tl);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
}
......@@ -3169,6 +3190,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
{
struct r8152 *tp = usb_get_intfdata(intf);
mutex_lock(&tp->control);
if (PMSG_IS_AUTO(message))
set_bit(SELECTIVE_SUSPEND, &tp->flags);
else
......@@ -3188,6 +3211,8 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
tasklet_enable(&tp->tl);
}
mutex_unlock(&tp->control);
return 0;
}
......@@ -3195,6 +3220,8 @@ static int rtl8152_resume(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
mutex_lock(&tp->control);
if (!test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
tp->rtl_ops.init(tp);
netif_device_attach(tp->netdev);
......@@ -3220,6 +3247,8 @@ static int rtl8152_resume(struct usb_interface *intf)
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
}
mutex_unlock(&tp->control);
return 0;
}
......@@ -3230,9 +3259,13 @@ static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (usb_autopm_get_interface(tp->intf) < 0)
return;
mutex_lock(&tp->control);
wol->supported = WAKE_ANY;
wol->wolopts = __rtl_get_wol(tp);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
}
......@@ -3245,9 +3278,13 @@ static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
if (ret < 0)
goto out_set_wol;
mutex_lock(&tp->control);
__rtl_set_wol(tp, wol->wolopts);
tp->saved_wolopts = wol->wolopts & WAKE_ANY;
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out_set_wol:
......@@ -3282,11 +3319,25 @@ static
int rtl8152_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
{
struct r8152 *tp = netdev_priv(netdev);
int ret;
if (!tp->mii.mdio_read)
return -EOPNOTSUPP;
return mii_ethtool_gset(&tp->mii, cmd);
ret = usb_autopm_get_interface(tp->intf);
if (ret < 0)
goto out;
mutex_lock(&tp->control);
ret = mii_ethtool_gset(&tp->mii, cmd);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out:
return ret;
}
static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
......@@ -3298,8 +3349,12 @@ static int rtl8152_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
if (ret < 0)
goto out;
mutex_lock(&tp->control);
ret = rtl8152_set_speed(tp, cmd->autoneg, cmd->speed, cmd->duplex);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out:
......@@ -3459,8 +3514,12 @@ rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
if (ret < 0)
goto out;
mutex_lock(&tp->control);
ret = tp->rtl_ops.eee_get(tp, edata);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out:
......@@ -3477,10 +3536,14 @@ rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
if (ret < 0)
goto out;
mutex_lock(&tp->control);
ret = tp->rtl_ops.eee_set(tp, edata);
if (!ret)
ret = mii_nway_restart(&tp->mii);
mutex_unlock(&tp->control);
usb_autopm_put_interface(tp->intf);
out:
......@@ -3522,7 +3585,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
break;
case SIOCGMIIREG:
mutex_lock(&tp->control);
data->val_out = r8152_mdio_read(tp, data->reg_num);
mutex_unlock(&tp->control);
break;
case SIOCSMIIREG:
......@@ -3530,7 +3595,9 @@ static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
res = -EPERM;
break;
}
mutex_lock(&tp->control);
r8152_mdio_write(tp, data->reg_num, data->val_in);
mutex_unlock(&tp->control);
break;
default:
......@@ -3723,6 +3790,7 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out;
tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
mutex_init(&tp->control);
INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
netdev->netdev_ops = &rtl8152_netdev_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment