Commit 6a9ddc89 authored by Benjamin Tissoires's avatar Benjamin Tissoires Committed by Jiri Kosina

HID: logitech-dj: enable notifications on connect/disconnect

The receiver can send HID++ notifications to the DJ devices when the
physical devices are connected/disconnected.
Enable this feature by default.

This command uses a HID++ command instead of a DJ one, so use a direct
call to usbhid instead of using logi_dj_recv_send_report()
Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: default avatarAndrew de los Reyes <adlr@chromium.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 33797820
......@@ -630,7 +630,9 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
unsigned timeout)
{
struct hid_device *hdev = djrcv_dev->hdev;
struct dj_report *dj_report;
u8 *buf;
int retval;
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
......@@ -642,7 +644,6 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
dj_report->report_params[CMD_SWITCH_PARAM_DEVBITFIELD] = 0x3F;
dj_report->report_params[CMD_SWITCH_PARAM_TIMEOUT_SECONDS] = (u8)timeout;
retval = logi_dj_recv_send_report(djrcv_dev, dj_report);
kfree(dj_report);
/*
* Ugly sleep to work around a USB 3.0 bug when the receiver is still
......@@ -651,6 +652,30 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
*/
msleep(50);
/*
* Magical bits to set up hidpp notifications when the dj devices
* are connected/disconnected.
*
* We can reuse dj_report because HIDPP_REPORT_SHORT_LENGTH is smaller
* than DJREPORT_SHORT_LENGTH.
*/
buf = (u8 *)dj_report;
memset(buf, 0, HIDPP_REPORT_SHORT_LENGTH);
buf[0] = REPORT_ID_HIDPP_SHORT;
buf[1] = 0xFF;
buf[2] = 0x80;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = 0x09;
buf[6] = 0x00;
hid_hw_raw_request(hdev, REPORT_ID_HIDPP_SHORT, buf,
HIDPP_REPORT_SHORT_LENGTH, HID_OUTPUT_REPORT,
HID_REQ_SET_REPORT);
kfree(dj_report);
return retval;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment