Commit 6aa59f51 authored by Aneesh Kumar K.V's avatar Aneesh Kumar K.V Committed by Michael Ellerman

powerpc/mm: Move hash specific pte bits to be top bits of RPN

We don't support the full 57 bits of physical address and hence can
overload the top bits of RPN as hash specific pte bits.

Add a BUILD_BUG_ON() to enforce the relationship between H_PAGE_F_SECOND
and H_PAGE_F_GIX.
Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: default avatarPaul Mackerras <paulus@ozlabs.org>
[mpe: Move the BUILD_BUG_ON() into hash_utils_64.c and comment it]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 2f18d533
......@@ -6,20 +6,13 @@
* Common bits between 4K and 64K pages in a linux-style PTE.
* Additional bits may be defined in pgtable-hash64-*.h
*
* Note: We only support user read/write permissions. Supervisor always
* have full read/write to pages above PAGE_OFFSET (pages below that
* always use the user access permissions).
*
* We could create separate kernel read-only if we used the 3 PP bits
* combinations that newer processors provide but we currently don't.
*/
#define H_PAGE_BUSY _RPAGE_SW1 /* software: PTE & hash are busy */
#define H_PTE_NONE_MASK _PAGE_HPTEFLAGS
#define H_PAGE_F_GIX_SHIFT 57
/* (7ul << 57) HPTE index within HPTEG */
#define H_PAGE_F_GIX (_RPAGE_RSV2 | _RPAGE_RSV3 | _RPAGE_RSV4)
#define H_PAGE_F_SECOND _RPAGE_RSV1 /* HPTE is in 2ndary HPTEG */
#define H_PAGE_HASHPTE _RPAGE_SW0 /* PTE has associated HPTE */
#define H_PAGE_F_GIX_SHIFT 56
#define H_PAGE_BUSY _RPAGE_RSV1 /* software: PTE & hash are busy */
#define H_PAGE_F_SECOND _RPAGE_RSV2 /* HPTE is in 2ndary HPTEG */
#define H_PAGE_F_GIX (_RPAGE_RSV3 | _RPAGE_RSV4 | _RPAGE_RPN44)
#define H_PAGE_HASHPTE _RPAGE_RPN43 /* PTE has associated HPTE */
#ifdef CONFIG_PPC_64K_PAGES
#include <asm/book3s/64/hash-64k.h>
......
......@@ -36,8 +36,21 @@
#define _RPAGE_RSV2 0x0800000000000000UL
#define _RPAGE_RSV3 0x0400000000000000UL
#define _RPAGE_RSV4 0x0200000000000000UL
#define _PAGE_PTE 0x4000000000000000UL /* distinguishes PTEs from pointers */
#define _PAGE_PRESENT 0x8000000000000000UL /* pte contains a translation */
/*
* Top and bottom bits of RPN which can be used by hash
* translation mode, because we expect them to be zero
* otherwise.
*/
#define _RPAGE_RPN0 0x01000
#define _RPAGE_RPN1 0x02000
#define _RPAGE_RPN44 0x0100000000000000UL
#define _RPAGE_RPN43 0x0080000000000000UL
#define _RPAGE_RPN42 0x0040000000000000UL
#define _RPAGE_RPN41 0x0020000000000000UL
/* Max physical address bit as per radix table */
#define _RPAGE_PA_MAX 57
......@@ -65,9 +78,6 @@
#define _PAGE_SOFT_DIRTY _RPAGE_SW3 /* software: software dirty tracking */
#define _PAGE_SPECIAL _RPAGE_SW2 /* software: special page */
#define _PAGE_PTE 0x4000000000000000UL /* distinguishes PTEs from pointers */
#define _PAGE_PRESENT 0x8000000000000000UL /* pte contains a translation */
/*
* Drivers request for cache inhibited pte mapping using _PAGE_NO_CACHE
* Instead of fixing all of them, add an alternate define which
......
......@@ -981,6 +981,19 @@ void __init hash__early_init_devtree(void)
void __init hash__early_init_mmu(void)
{
/*
* We have code in __hash_page_64K() and elsewhere, which assumes it can
* do the following:
* new_pte |= (slot << H_PAGE_F_GIX_SHIFT) & (H_PAGE_F_SECOND | H_PAGE_F_GIX);
*
* Where the slot number is between 0-15, and values of 8-15 indicate
* the secondary bucket. For that code to work H_PAGE_F_SECOND and
* H_PAGE_F_GIX must occupy four contiguous bits in the PTE, and
* H_PAGE_F_SECOND must be placed above H_PAGE_F_GIX. Assert that here
* with a BUILD_BUG_ON().
*/
BUILD_BUG_ON(H_PAGE_F_SECOND != (1ul << (H_PAGE_F_GIX_SHIFT + 3)));
htab_init_page_sizes();
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment