Commit 6b08d07c authored by Lukasz Majewski's avatar Lukasz Majewski Committed by Lee Jones

leds: trigger: netdev: Add support for tx_err and rx_err notification with LEDs

This patch provides support for enabling blinking of LEDs when RX or TX
errors are detected.

Approach taken in this patch is similar to one for TX or RX data
transmission indication (i.e. TRIGGER_NETDEV_TX/RX attribute).

One can inspect transmission errors with:
ip -s link show eth0

Example LED configuration:
cd /sys/devices/platform/amba_pl@0/a001a000.leds/leds/
echo netdev > mode:blue/trigger && \
echo eth0 > mode:blue/device_name && \
echo 1 > mode:blue/tx_err
Signed-off-by: default avatarLukasz Majewski <lukma@denx.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240710100651.4059887-1-lukma@denx.deSigned-off-by: default avatarLee Jones <lee@kernel.org>
parent b5a7fc28
......@@ -39,6 +39,8 @@
* (has carrier) or not
* tx - LED blinks on transmitted data
* rx - LED blinks on receive data
* tx_err - LED blinks on transmit error
* rx_err - LED blinks on receive error
*
* Note: If the user selects a mode that is not supported by hw, default
* behavior is to fall back to software control of the LED. However not every
......@@ -144,7 +146,9 @@ static void set_baseline_state(struct led_netdev_data *trigger_data)
* checking stats
*/
if (test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ||
test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ||
test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) ||
test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode))
schedule_delayed_work(&trigger_data->work, 0);
}
}
......@@ -337,6 +341,8 @@ static ssize_t netdev_led_attr_show(struct device *dev, char *buf,
case TRIGGER_NETDEV_FULL_DUPLEX:
case TRIGGER_NETDEV_TX:
case TRIGGER_NETDEV_RX:
case TRIGGER_NETDEV_TX_ERR:
case TRIGGER_NETDEV_RX_ERR:
bit = attr;
break;
default:
......@@ -371,6 +377,8 @@ static ssize_t netdev_led_attr_store(struct device *dev, const char *buf,
case TRIGGER_NETDEV_FULL_DUPLEX:
case TRIGGER_NETDEV_TX:
case TRIGGER_NETDEV_RX:
case TRIGGER_NETDEV_TX_ERR:
case TRIGGER_NETDEV_RX_ERR:
bit = attr;
break;
default:
......@@ -429,6 +437,8 @@ DEFINE_NETDEV_TRIGGER(half_duplex, TRIGGER_NETDEV_HALF_DUPLEX);
DEFINE_NETDEV_TRIGGER(full_duplex, TRIGGER_NETDEV_FULL_DUPLEX);
DEFINE_NETDEV_TRIGGER(tx, TRIGGER_NETDEV_TX);
DEFINE_NETDEV_TRIGGER(rx, TRIGGER_NETDEV_RX);
DEFINE_NETDEV_TRIGGER(tx_err, TRIGGER_NETDEV_TX_ERR);
DEFINE_NETDEV_TRIGGER(rx_err, TRIGGER_NETDEV_RX_ERR);
static ssize_t interval_show(struct device *dev,
struct device_attribute *attr, char *buf)
......@@ -538,6 +548,8 @@ static struct attribute *netdev_trig_attrs[] = {
&dev_attr_half_duplex.attr,
&dev_attr_rx.attr,
&dev_attr_tx.attr,
&dev_attr_rx_err.attr,
&dev_attr_tx_err.attr,
&dev_attr_interval.attr,
&dev_attr_offloaded.attr,
NULL
......@@ -628,7 +640,9 @@ static void netdev_trig_work(struct work_struct *work)
/* If we are not looking for RX/TX then return */
if (!test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) &&
!test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode))
!test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) &&
!test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) &&
!test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode))
return;
dev_stats = dev_get_stats(trigger_data->net_dev, &temp);
......@@ -636,7 +650,11 @@ static void netdev_trig_work(struct work_struct *work)
(test_bit(TRIGGER_NETDEV_TX, &trigger_data->mode) ?
dev_stats->tx_packets : 0) +
(test_bit(TRIGGER_NETDEV_RX, &trigger_data->mode) ?
dev_stats->rx_packets : 0);
dev_stats->rx_packets : 0) +
(test_bit(TRIGGER_NETDEV_TX_ERR, &trigger_data->mode) ?
dev_stats->tx_errors : 0) +
(test_bit(TRIGGER_NETDEV_RX_ERR, &trigger_data->mode) ?
dev_stats->rx_errors : 0);
if (trigger_data->last_activity != new_activity) {
led_stop_software_blink(trigger_data->led_cdev);
......
......@@ -611,6 +611,8 @@ enum led_trigger_netdev_modes {
TRIGGER_NETDEV_FULL_DUPLEX,
TRIGGER_NETDEV_TX,
TRIGGER_NETDEV_RX,
TRIGGER_NETDEV_TX_ERR,
TRIGGER_NETDEV_RX_ERR,
/* Keep last */
__TRIGGER_NETDEV_MAX,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment