Commit 6b271792 authored by Alexandre Belloni's avatar Alexandre Belloni

ARM: at91/dt: at91sam9g45: use slow clock where necessary

The watchdog, the reset controller, the RTC, the real-time timer, the
shutdown controller and the timer counters need the slow clock, add it
where necessary.
Acked-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
parent 53b0b378
...@@ -387,6 +387,7 @@ vdec_clk: vdec_clk { ...@@ -387,6 +387,7 @@ vdec_clk: vdec_clk {
rstc@fffffd00 { rstc@fffffd00 {
compatible = "atmel,at91sam9g45-rstc"; compatible = "atmel,at91sam9g45-rstc";
reg = <0xfffffd00 0x10>; reg = <0xfffffd00 0x10>;
clocks = <&clk32k>;
}; };
pit: timer@fffffd30 { pit: timer@fffffd30 {
...@@ -400,22 +401,23 @@ pit: timer@fffffd30 { ...@@ -400,22 +401,23 @@ pit: timer@fffffd30 {
shdwc@fffffd10 { shdwc@fffffd10 {
compatible = "atmel,at91sam9rl-shdwc"; compatible = "atmel,at91sam9rl-shdwc";
reg = <0xfffffd10 0x10>; reg = <0xfffffd10 0x10>;
clocks = <&clk32k>;
}; };
tcb0: timer@fff7c000 { tcb0: timer@fff7c000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfff7c000 0x100>; reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
clock-names = "t0_clk", "t1_clk", "t2_clk"; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
}; };
tcb1: timer@fffd4000 { tcb1: timer@fffd4000 {
compatible = "atmel,at91rm9200-tcb"; compatible = "atmel,at91rm9200-tcb";
reg = <0xfffd4000 0x100>; reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
clock-names = "t0_clk", "t1_clk", "t2_clk"; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
}; };
dma: dma-controller@ffffec00 { dma: dma-controller@ffffec00 {
...@@ -1123,6 +1125,7 @@ watchdog@fffffd40 { ...@@ -1123,6 +1125,7 @@ watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt"; compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>; reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&clk32k>;
atmel,watchdog-type = "hardware"; atmel,watchdog-type = "hardware";
atmel,reset-type = "all"; atmel,reset-type = "all";
atmel,dbg-halt; atmel,dbg-halt;
...@@ -1257,6 +1260,7 @@ rtc@fffffdb0 { ...@@ -1257,6 +1260,7 @@ rtc@fffffdb0 {
compatible = "atmel,at91rm9200-rtc"; compatible = "atmel,at91rm9200-rtc";
reg = <0xfffffdb0 0x30>; reg = <0xfffffdb0 0x30>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&clk32k>;
status = "disabled"; status = "disabled";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment