ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER

Convert the omap2plus platforms to be using CONFIG_MULTI_IRQ_HANDLER.
Each machine is modified to provide either omap2_intc_handle_irq(),
omap3_intc_handle_irq() or gic_handle_irq().

This allows for a major cleanup, removing the MULTI_OMAP setup
from the interrupt path.

Tested on both Panda and IGEPv2 (single kernel image)
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

arch/arm/mach-omap2/Kconfig

@@ -25,6 +25,7 @@ config ARCH_OMAP2
 	depends on ARCH_OMAP2PLUS
 	default y
 	select CPU_V6
+	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP3
 	bool "TI OMAP3"

arch/arm/mach-omap2/board-2430sdp.c

@@ -301,6 +301,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3430sdp.c

@@ -728,6 +728,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-3630sdp.c

@@ -215,6 +215,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-4430sdp.c

@@ -28,6 +28,7 @@
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -984,6 +985,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap4_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517crane.c

@@ -98,6 +98,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_crane_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-am3517evm.c

@@ -491,6 +491,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-apollon.c

@@ -354,6 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t35.c

@@ -634,6 +634,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -644,6 +645,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
 	.map_io         = omap3_map_io,
 	.init_early     = omap3630_init_early,
 	.init_irq       = omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine   = cm_t3730_init,
 	.timer          = &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-cm-t3517.c

@@ -299,6 +299,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
 	.map_io		= omap3_map_io,
 	.init_early	= am35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= cm_t3517_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-devkit8000.c

@@ -660,6 +660,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-generic.c

@@ -122,6 +122,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap2_timer,
 	.dt_compat	= omap243x_boards_compat,

arch/arm/mach-omap2/board-h4.c

@@ -396,6 +396,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-igep0020.c

@@ -672,6 +672,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -682,6 +683,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= igep_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-ldp.c

@@ -434,6 +434,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-n8x0.c

@@ -689,6 +689,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
 MACHINE_END
@@ -699,6 +700,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
 MACHINE_END
@@ -709,6 +711,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_irq	= omap2_init_irq,
+	.handle_irq	= omap2_intc_handle_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap2_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3beagle.c

@@ -559,6 +559,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3evm.c

@@ -681,6 +681,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3logic.c

@@ -208,6 +208,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -217,6 +218,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3logic_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3pandora.c

@@ -606,6 +606,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3pandora_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3stalker.c

@@ -454,6 +454,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
 	.map_io			= omap3_map_io,
 	.init_early		= omap35xx_init_early,
 	.init_irq		= omap3_init_irq,
+	.handle_irq		= omap3_intc_handle_irq,
 	.init_machine		= omap3_stalker_init,
 	.timer			= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -381,6 +381,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap3_touchbook_init,
 	.timer		= &omap3_secure_timer,
 MACHINE_END

arch/arm/mach-omap2/board-omap4panda.c

@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -577,6 +578,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	.map_io		= omap4_map_io,
 	.init_early	= omap4430_init_early,
 	.init_irq	= gic_init_irq,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= omap4_panda_init,
 	.timer		= &omap4_timer,
 MACHINE_END

arch/arm/mach-omap2/board-overo.c

@@ -562,6 +562,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
 	.map_io		= omap3_map_io,
 	.init_early	= omap35xx_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= overo_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rm680.c

@@ -149,6 +149,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rm680_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-rx51.c

@@ -127,6 +127,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= rx51_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/board-zoom.c

@@ -135,6 +135,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
 MACHINE_END
@@ -145,6 +146,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.map_io		= omap3_map_io,
 	.init_early	= omap3630_init_early,
 	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
 	.init_machine	= omap_zoom_init,
 	.timer		= &omap3_timer,
 MACHINE_END

arch/arm/mach-omap2/include/mach/entry-macro.S

@@ -10,146 +10,9 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE		OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET	0x0040	/* omap2/3 active interrupt offset */
-#define	ACTIVEIRQ_MASK		0x7f	/* omap2/3 active interrupt bits */
 
 		.macro	disable_fiq
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
-		/*
-		 * Configure the interrupt base on the first interrupt.
-		 * See also omap_irq_base_init for setting omap_irq_base.
-		 */
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =omap_irq_base	@ irq base address
-		ldr	\base, [\base, #0]	@ irq base value
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		tst	\base, #0x100		@ gic address?
-		bne	4401f			@ found gic
-
-		/* Handle omap2 and omap3 */
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-		bne	9998f
-
-		/*
-		 * ti816x has additional IRQ pending register. Checking this
-		 * register on omap2 & omap3 has no effect (read as 0).
-		 */
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-9998:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-		b	9999f
-
-		/* Handle omap4 */
-4401:		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-		ldr     \tmp, =1021
-		bic     \irqnr, \irqstat, #0x1c00
-		cmp     \irqnr, #15
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-9999:
-		.endm
-
-#ifdef CONFIG_SMP
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-#endif	/* CONFIG_SMP */
-
-#else	/* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-		.macro  get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
-		ldr	\base, =OMAP2_IRQ_BASE
-#else
-		ldr	\base, =OMAP3_IRQ_BASE
-#endif
-		.endm
-
-		/* Check the pending interrupts. Note that base already set */
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
-		cmp	\irqnr, #0x0
-		bne	9999f
-		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
-		cmp	\irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
-		bne	9999f
-		ldr	\irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
-		cmp	\irqnr, #0x0
-#endif
-9999:
-		ldrne	\irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
-		and	\irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
-		.endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
-		.macro  get_irqnr_preamble, base, tmp
-		ldr     \base, =OMAP4_IRQ_BASE
-		.endm
-
-#endif
-
-#endif	/* MULTI_OMAP2 */

arch/arm/plat-omap/Kconfig

@@ -24,6 +24,7 @@ config ARCH_OMAP2PLUS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
 	select OMAP_DM_TIMER
+	select MULTI_IRQ_HANDLER
 	help
 	  "Systems based on OMAP2, OMAP3 or OMAP4"